Samsung SyncMaster 933HD Plus User manual

LCD TV MONITOR
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
Model Serial No.
SyncMaster 933HD Plus
www.samsung.com/register
BN59-00905F_eng.indd 1 2009-11-10 9:30:36

Important Warranty Information Regarding Television Format Viewing❑
See the warranty card for more information on warranty terms.N
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily
designed to view wide screen format full-motion video. The images displayed on them should
primarily be in the wide screen 16:9 ratio format, or expanded to ll the screen if your model offers
this feature and the images are constantly moving. Displaying stationary graphics and images
on screen, such as the dark sidebars on nonexpanded standard format television video and
programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game
displays, station logos, web sites or computer graphics and patterns, should be limited as described
above for all televisions. Displaying stationary images that exceed the above guidelines can cause
uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD
picture. To avoid this, vary the programming and images, and primarily display full screen moving
images, not stationary patterns or dark bars.
On LCD models that offer picture sizing features, use these controls to view different formats as a
full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging
as a result of format selection and use, as well as burned-in images, are not covered by your
Samsung limited warranty.
Precautions When Displaying a Still Image❑
A still image may cause permanent damage to the TV screen
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen●
image retention. This image retention is also known as “screen burn”. To avoid such image
retention, reduce the degree of brightness and contrast of the screen when displaying a still
image.
●Watching the LCD TV in 4:3 format for a long period of time may leave traces
of borders displayed on the left, right and center of the screen caused by the
difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may●
produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
BN59-00905F_eng.indd 2 2009-11-10 9:30:36

English - 1
License❑
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
Symbol❑
N O T
Note One-Touch Button TOOLS Button
General Information
Accessories■................................................. 2
Viewing the Control Panel■........................... 2
Viewing the Connection Panel■..................... 3
Remote Control■........................................... 4
Installing Batteries in the Remote Control■... 4
Connections
Connecting VHF and UHF Antennas■........... 5
Connecting Cable TV■.................................. 6
Connecting a DVD / Blu-Ray player /■
Satellite receiver (Set-Top Box) via HDMI ... 7
Connecting a DVD / Blu-Ray player /■
Satellite receiver (Set-Top Box) via DVI ...... 8
Connecting a VCR■....................................... 8
Connecting a Camcorder■............................. 9
Connecting a PC■....................................... 10
Operation
Turning the TV On and Off■.........................11
Plug & Play Feature■....................................11
CHANNEL CONTROL
Conguring the Channel Menu■.................. 12
Managing Channels■.................................. 13
Picture Control
Conguring the Picture Menu ■
(TV / AV / HDMI ) ....................................... 15
Using Your TV as a Computer (PC)■
Display....................................................... 18
Setting up the TV with your PC■................. 19
Sound Control
Conguring the Sound Menu■..................... 20
Setup
Conguring the Setup Menu■...................... 21
Input / Support
Conguring the Input Menu■....................... 26
Conguring the Support Menu■................... 27
Anynet
+
Connecting Anynet■+Devices .................... 28
Setting Up Anynet+■.................................... 29
Switching between Anynet■+Devices......... 30
Troubleshooting for Anynet■+...................... 31
Installing the Software
Installing the Device Driver■........................ 32
Natural Color■............................................. 32
MultiScreen■................................................ 33
Appendix
TV Monitor Self-Diagnosis■......................... 34
Troubleshooting■......................................... 34
FAQ■........................................................... 36
Installing the Stand■.................................... 37
Disconnecting the Stand■............................ 37
Wall Mount Kit Specications (VESA)■....... 37
Using the Anti-Theft Kensington Lock■....... 38
Securing the Installation Space■................. 39
Specications■............................................ 40
Power Saving Function■.............................. 40
CONTENTS
BN59-00905F_eng.indd 1 2009-11-10 9:30:36

English - 2
GENERAL INFORMATION
Accessories¦
Please make sure the following items are included with your LCD TV. If any items are missing,
contact your dealer.
Remote Control / Batteries (AAA x 2) (Not available in all locations) / Power Cord / Cleaning Cloth
/ User Manual / Quick Setup Guide / Warranty Card (Not available in all locations) / Cable holder
/ Stand Base
The items color and shape may vary depending on the model.N
Cleaning Cloth is only provided for highly polished black products as a product feature.N
Viewing the Control Panel¦
The product color an shape may vary depending on the model.N
1
SOURCE
2
3
5
6
4
7
8
9
10
MENU
1 SOURCE E : Toggles between all the available input sources. In the on-screen menu, use this
E button as you use the button on the remote control.
2 MENU : Press to see an on-screen menu of your TV’s features.
3 , 4 + / - : Moves from one menu item to another horizontally or adjusts selected menu values
Adjusts the audio volume.
5 , 6 , : Moves from one menu item to another vertically or adjusts selected menu values. In TV
mode, selects TV channels.
7 P (POWER): Press to turn the TV on and off.
8 REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.
9 POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.
0 SPEAKERS
BN59-00905F_eng.indd 2 2009-11-10 9:30:36

English - 3
Viewing the Connection Panel¦
The product color and shape may vary depending on the model.N
1 ANT IN
Connects to an antenna or cable TV system.–
2 SERVICE
Connector for service only.–
3 HDMI IN
Connects to the HDMI jack of a device with an HDMI output.–
No sound connection is needed for an HDMI to HDMI connection.N
4 AV IN
Video and audio inputs for external devices, such as a camcorder or VCR.–
5 PC IN
Connects to the video jacks on your PC.–
6
Connect your headphones to the Headphone connection terminal.–
7 HDMI / PC AUDIO IN
Connect the HDMI / PC AUDIO IN terminal at the back of your product to your–
computer’s sound card.
8 POWER INPUT
Connects the supplied power cord.–
9 KENSINGTON LOCK
The Kensington Lock (optional) is a device used to physically x the system when used in –
a public place. If you want to use a locking device, contact the dealer where you purchased
the TV.
The location of the Kensington Lock may be different depending on its model.N
[TV Rear Panel]
ANT IN
HDMI IN
AV IN
- AUDIO - VIDEO
RL
PC IN
HDMI / PC AUDIO IN
POWER
BN59-00905F_eng.indd 3 2009-11-10 9:30:37

English - 4
Remote Control¦
You can use the remote control up to a distance of about 23 feet from the TV.N
The performance of the remote control may be affected by bright light.N
1 POWER:Turns the TV on and
off.
2 NUMERIC BUTTONS: Press to
change the channel.
3 : Press to select additional
channels (digital) being broadcast
by the same station. For example,
to select channel ‘54-3’, press
‘54’, then press ‘-’ and ‘3’.
4 VOL / VOL : Press to
increase or decrease the
volume.
5 CH LIST: Used to display
Channel Lists on the screen.
6 TOOLS: Use to quickly select
frequently used functions.
7  UP▲/DOWN▼/LEFT◄/
RIGHT►/ E : Use to select on-
screen menu items and change
menu values.
8 INFO: Press to display
information on the TV screen.
9 COLOR BUTTONS: Use these
buttons in the Channel list, etc.
0 P.SIZE:Picture size selection.
! MTS:Press to choose stereo,
mono or Separate Audio
Program (SAP broadcast).
@ TV: Selects the TV mode
directly.
# PRE-CH: This button
is used to return to the
previous channel viewed.
$ MUTE M : Press to
temporarily cut off the
sound.
% CH : Press to change
channels.
^ SOURCE: Press to display
and select the available
video sources.
& FAV.CH: Press to switch to
your favorite channels.
* MENU : Displays the
main on-screen menu.
( RETURN: Returns to the
previous menu.
) EXIT:Press to exit the
menu.
a CC:Controls the caption
decoder.
Installing Batteries in the Remote Control¦
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagramNinside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote controlNfor a long time. (Assuming typical TV usage, the batteries should last for about one year.)
If the remote control doesn’t work, check the following:N
Is the TV power on?●
Are the plus and minus ends of the batteries reversed?●
Are the batteries drained?●
Is there a power outage or is the power cord unplugged?●
Is there a special uorescent light or neon sign nearby?●
CHVOL
17
18
19
20
21
15
14
13
1
2
3
4
6
5
7
8
9
10
1 1
12
16
BN59-00905F_eng.indd 4 2009-11-10 9:30:37

English - 5
CONNECTIONS
Connecting VHF and UHF Antennas¦
If your antenna has a set of leads that look like the diagram to the right, see ‘Antennas with 300 Ω
Flat Twin Leads’ below.
If your antenna has one lead that looks like the diagram to the
right, see ‘Antennas with 75 Ω Round Leads’.
If you have two antennas, see ‘Separate VHF and UHF
Antennas’.
Antennaswith300ΩFlatTwinLeads
If you are using an off-air antenna (such as a roof antenna or
‘rabbit ears’) that has 300Ω twin at leads, follow the directions
below.
1. Place the wires from the twin leads under the screws on a 300-
75 Ω adapter (not supplied). Use a screwdriver to tighten the
screws.
2. Plug the adaptor into the ANT IN terminal on the back of the TV.
Antennaswith75ΩRoundLeads
Plug the antenna lead into the ANT IN terminal on the back of
the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and
one UHF), you must combine the two antenna signals before
connecting the antennas to the TV. This procedure requires
an optional combiner-adaptor (available at most electronics
shops).
1. Connect both antenna leads to the combiner.
2. Plug the combiner into the ANT IN terminal on the bottom of
the rear panel.
ANT IN
ANT IN
UHF
VHF
ANT IN
UHF
VHF
BN59-00905F_eng.indd 5 2009-11-10 9:30:38

English - 6
Connecting Cable TV¦
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
Plug the incoming cable into the ANT IN terminal on the back of
the TV.
Because this TV is cable-ready, you do not need a cable boxNto view unscrambled cable channels.
Connecting to a Cable Box that Descrambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on
your cable box.
This terminal might be labeled ‘ANT OUT’, ‘VHF OUT’ orNsimply, ‘OUT’.
2. Connect the other end of this cable to the ANT IN terminal on
the back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch and four lengths of RF cable.
(These items are available at most electronics stores.)
Splitter
Cable Box
Incoming cable TV Rear
ANT IN
RF (A/B) Switch
1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
This terminal might be labeled ‘ANT IN’, ‘VHF IN’ or simply, ‘IN’.N
2. Connect this cable to a two-way splitter.
3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on
the cable box.
4. Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal
on the RF(A/B) switch.
5. Connect another cable between the other OUT terminal on the splitter and the A–IN terminal
on the RF (A/B) switch.
6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN
terminal on the rear of the TV.
After you have made this connection, set the A/B switch to the ‘A’ position for normal viewing. Set
the A/B switch to the ‘B’ position to view scrambled channels. (When you set the A/B switch to ‘B’,
you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
ANT IN
ANT IN ANT OUT
ANT IN
BN59-00905F_eng.indd 6 2009-11-10 9:30:38

English - 7
Connecting a DVD / Blu-Ray player / Satellite receiver (Set-Top Box) via HDMI¦
This connection can only be made if there is an HDMI Output connector on the external device.
TV Rear Panel
DVD / Blu-Ray player / Satellite receiver
(Set-Top Box) Rear Panel
ANT IN
HDMI IN
AV IN
- AUDIO - VIDEO
RL
PC IN
HDMI / PC AUDIO IN
ANTIN
AV IN
-
A
U
DI
O
-
V
IDE
O
R
L
P
C
I
N
HDMI
/
P
C
A
UDI
O
I
N
1 HDMI Cable (Not supplied)
What is HDMI?N
HDMI(High-Denition Multimedia Interface), is an interface that enables the transmission of ●
digital audio and video signals using a single cable.
The difference between HDMI and DVI is that the HDMI device is smaller in size and has the●
HDCP (High Bandwidth Digital Copy Protection) coding feature installed.
Each DVD / Blu-Ray player / Satellite receiver (Set-Top Box) has a different back panelNconguration.
The TV may not output sound and pictures may be displayed with abnormal color when DVD /NBlu-Ray player / Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are
connected. When connecting an older HDMI cable and there is no sound, connect the HDMI
cable to the HDMI IN jack and the audio cables to the HDMI / PC AUDIO IN jacks on the back of
the TV. If this happens, contact the company that provided the DVD / Blu-Ray player / Satellite
receiver (Set-Top Box) to conrm the HDMI version, then request an upgrade.
HDMI cables that are not 1.3 may cause annoying icker or no screen display.N
BN59-00905F_eng.indd 7 2009-11-10 9:30:38

English - 8
Connecting a DVD / Blu-Ray player / Satellite receiver (Set-Top Box) via DVI¦
This connection can only be made if there is a DVI Output connector on the external device.
ANT IN
HDMI IN
AV IN
- AUDIO - VIDEO
RL
PC IN
HDMI / PC AUDIO IN
ANTIN
AV IN
- A
U
DI
O
-
V
IDE
O
R
L
P
C
I
N
1 DVI to HDMI Cable (Not supplied)
2 RCA to stereo Cable (Not supplied)
DVD / Blu-Ray player /
Satellite receiver
(Set-Top Box)
TV Rear Panel
Each DVD / Blu-Ray player / Satellite receiver (Set-Top Box) has a different back panelNconguration.
When connecting a DVD / Blu-Ray player / Satellite receiver (Set-Top Box), match theNcolor of the connection terminal to the cable.
Connecting a VCR¦
ANT IN
HDMI IN
AV IN
- AUDIO - VIDEO
RL
PC IN
HDMI / PC AUDIO IN
If you have a ‘mono’ (non-stereo) VCR, use a Y-connector (not supplied) to connect to the rightNand left audio input jacks of the TV. Alternatively, connect the cable to the ‘R’ jack. If your VCR is
stereo, you must connect two cables.
Each VCR has a different back panel conguration.N
When connecting a VCR, match the color of the connection terminal to the cable.N
1 Video Cable (Not supplied)
2 Audio Cable (Not
supplied)
VCR Rear Panel
TV Rear Panel
BN59-00905F_eng.indd 8 2009-11-10 9:30:39

English - 9
Connecting a Camcorder¦
Using a Video Cable
ANT IN
HDMI IN
AV IN
- AUDIO - VIDEO
RL
PC IN
HDMI / PC AUDIO IN
ANT IN
HDMI IN
AV IN
- AUDIO - VIDEO
RL
PC IN
HDMI / PC AUDIO IN
Camcorder
TV Rear Panel
1 Video Cable (Not supplied)
2 Audio Cable
(Not supplied)
Each Camcorder has a different back panel conguration.N
When connecting a Camcorder, match the color of the connection terminal to the cable.N
Using an HDMI Cable
ANT IN
HDMI IN
AV IN
- AUDIO - VIDEO
RL
PC IN
HDMI / PC AUDIO IN
ANT IN
HDMI IN
AV IN
- AUDIO - VIDEO
RL
PC IN
HDMI / PC AUDIO IN
TV Rear Panel
HD Camcorder
1 HDMI Cable (Not supplied)
1. Connect an HDMI Cable between the HDMI IN jack on the TV and the HDMI OUT jack on the
camcorder.
BN59-00905F_eng.indd 9 2009-11-10 9:30:40

English - 10
Connecting a PC¦
Using the D-Sub Cable
ANT IN
HDMI IN
AV IN
- AUDIO - VIDEO
RL
PC IN
HDMI / PC AUDIO IN
A
NT I
N
HDMIIN
AV IN
- AUDI
O
-
V
IDE
O
R
L
ANT IN
HDMI IN
AV IN
- AUDIO - VIDEO
RL
PC IN
HDMI / PC AUDIO IN
ANTIN
AV IN
- A
U
DI
O
-
V
IDE
O
R
L
PC I
N
TV Rear Panel
PC
1 D-Sub Cable
When connecting a PC, match the color of the connection terminal to the cableN.
Using the HDMI Cable
ANT IN
HDMI IN
AV IN
- AUDIO - VIDEO
RL
PC IN
HDMI / PC AUDIO IN
A
NT I
N
AV IN
- AUDI
O
-
V
IDE
O
R
L
P
C
I
N
PC
TV Rear Panel
1 HDMI Cable (Not supplied)
2 Stereo Cable (Not supplied)
Each PC has a different back panel congurationN.
2 Stereo Cable (Not supplied)
BN59-00905F_eng.indd 10 2009-11-10 9:30:41

English - 11
OPERATION
Turning the TV On and Off¦
Press the POWER P button on the remote control. You can
also use the P button on the TV.
Plug & Play Feature¦
When the TV is initially powered on, basic settings proceed automatically
and subsequently.
1. Press the POWER P button on the remote control.
You can also use theN P button on the TV.
2. Press the Ebutton, then “Select Language of the OSD.” menu is
automatically displayed.
3. Press the ▲ or ▼ button to select language, then press the Ebutton. The message “Select
‘Home Use’ when installing this TV in your home.” is displayed.
4. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then press the Ebutton. The
message “Select the Antenna source to memorize.” is displayed.
We recommend setting the TV to “NHome Use” mode for the best picture in your home
environment.
“NStore Demo” mode is only intended for use in retail environments. If the unit is accidentally set
to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the
TV for 5 seconds.
5. Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the Ebutton
to select “Start”.
AirN: “Air” antenna signal. / Cable: “Cable” antenna signal. / Auto: “Air” and “Cable” antenna
signals.
In Cable mode, you can select the correct signal source amongNSTD, HRC, and IRC by pressing
the ▲, ▼, ◄ or ► button, then press the Ebutton. If you have Digital cable, select the cable
system signal source for both Analog and Digital. Contact your local cable company to identify
the type of cable system that exists in your particular area.
6. Press the Ebutton to select “Start”. The TV will begin memorizing all of the available channels.
To stop the search before it has nished, press the N E button with “Stop” selected.
After all the available channels are stored, it starts to remove scrambled channels. TheNAuto program menu then reappears. Press the Ebutton when channel memorization is
complete. The message “Set the Clock Mode.” is displayed.
7. Press the Ebutton.
Press the ▲ or ▼ button to select “Auto”, then Press the Ebutton. The message “Set to daylight
saving time.” is displayed. If you select “Manual”, “Set current date and time” is displayed.
8. Press the ▲ or ▼ button to select “Off”, “On” or “Auto”, then press the button.
9. Press the ▲ or ▼ button to highlight the time zone for your local area. Press the Ebutton. If you
have received a digital signal, the time will be set automatically.
10. The connection method to provide the best quality HD is offered. After conrming the method, press
the Ebutton.
11. The message “Enjoy your TV.” is displayed. When you have nished, press the Ebutton.
Plug & Play
Select Language of the OSD.
Language : English r
E Enter
CHVOL
BN59-00905F_eng.indd 11 2009-11-10 9:30:41

English - 12
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the E button.
2. Press the E button again to select “Plug & Play”. For further details on setting up options.
The “NPlug & Play” feature is only available in the TV mode. CHANNEL CONTROL
CHANNEL CONTROL
ConguringtheChannelMenu¦
Antenna→Air❑/ Cable
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Press theTTOOLS button to display “Tools” menu. You can
also set the Antenna by selecting “Tools → Switch to Cable
(or Switch to Air)”.
Auto Program❑
Air: Air antenna signal. / Cable: Cable antenna signal. /
Auto: Air and Cable antenna signals
When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC identifyNvarious types of cable TV systems. Contact your local cable company to identify the type of cable
system that exists in your particular area. At this point the signal source has been selected.
After all the available channels are stored, it starts to remove scrambled channels (ClearingNScrambled Channels). The Auto program menu then reappears.
If you want to stop Auto Programming, press theN E button. The “Stop Auto Program?”
message will be displayed. Select “Yes” by pressing the ◄ or ► button, then press the E
button.
Clearing Scrambled Channels❑(digital channels only)
This function is used to lter out scrambled channels after “Auto Program” is completed. This
process may take up to 20~30 minutes.
To stop searching scrambled channels: Press theN E button to select “Stop”. Press the ◄ button
to select “Yes”, then press the button.
This function is only available in “NCable” mode.
Channel List❑
For the detailed procedures on using the “Channel List”, refer to the ‘Managing Channels’
instructions.
You can select these options by simply pressing theNCH LIST button on the remote control.
Fine Tune❑(analog channels only)
Use ne tuning to manually adjust a particular channel for optimal reception.
If you do not store the ne-tuned channel in memory, adjustments are not saved.N
“*” will appear next to the name of ne-tuned channels.N
To reset the ne tuning setting, press the ▼ button to select “NReset”, then press the Ebutton.
Antenna  :Air  ►
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Channel
BN59-00905F_eng.indd 12 2009-11-10 9:30:41

English - 13
Managing Channels¦
Channel List❑
Using this menu, you can add / delete or set favorite channels
and use the program guide for digital broadcasts.
All Channels
Shows all currently available channels.
Added Channels
Shows all added channels.
Favorite
Shows all favorite channels.
To select the favorite channels you have set up, press theOFAV.CH button on the remote control.
Programmed
Shows all current reserved Programs.
Select a channel in theNAll Channels, Added Channels or Favorite screen by pressing the ▲ /
▼ buttons, and pressing the E. Then you can watch the selected channel.
Using the Color buttons with the Channel ListN
Green (Zoom):– Enlarges or shrinks a channel number.
Yellow (Select):– Selects multiple channel lists. You can perform the add / delete or add to
Favorite / delete from Favorite function for multiple channels at the same time. Select the
required channels and press the yellow button to set all the selected channels at the same
time. The cmark appears to the left of the selected channels.
TOOLS (Tools):– Displays the Add (or Delete), Add to Favorite (or Delete from Favorite),
Timer Viewing, Channel Name Edit, Select All (or Deselect All) and Auto Program
menus (The Options menus may differ depending on the situation.)
Channel Status Display IconsN
♥ :– A channel set as a Favorite.
c–: A channel selected by pressing the yellow button.
(–: A Program currently being broadcast.
)–: A reserved program
Channel List Option Menu (in All Channels / Added Channels / Favorite)
Press the TOOLS button to use the option menu.
Option menu items may differ depending on the channel status.N
Add / Delete
You can delete or add a channel to display the channels you want.
All deleted channels will be shown onNAll Channels menu.
A gray-colored channel indicates the channel has been deleted.N
TheNAdd menu only appears for deleted channels.
You can also delete a channel from theNAdded Channels or Favorite menu in the same manner.
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3 Alice’s Adventures in Wonderland
Added Channels
Air Zoom Select
T Tools
BN59-00905F_eng.indd 13 2009-11-10 9:30:41

English - 14
Add to Favorite / Delete from Favorite
You can set channels you watch frequently as Favorite.
Press theTTOOLS button to display the Tools menu. You can
also set the add to (or delete from) Favorites by selecting
Tools → Add to Favorite (or Delete from Favorite).
The ♥ symbol will be displayed and the channel will be set as Na favorite.
All favorite channels will be shown in theNFavorite menu.
Timer Viewing
If you reserve a program you want to watch, the channel is automatically switched to the reserved
channel in the Channel List; even when you are watching another channel. To reserve a program,
set the current time rst.
Only memorized channels can be reserved.N
You can set the channel, month, day, year, hour and minute directly by pressing the numberNbuttons on the remote control.
Reserving a program will be shown in theNProgrammed menu.
Digital Program Guide and Viewing ReservationN
When a digital channel is selected, and you press the ► button, the Program Guide for the Nchannel appears. You can reserve a program according to the procedures described above.
Channel Name Edit (analog channels only)
Channels can labeled so that their call letters appear whenever the channel is selected.
The names of digital broadcasting channels are automatically assigned and cannot be labeled.N
Select All / Deselect All
Select All●: You can select all the channels in the channel list.
Deselect All●: You can deselect all the selected channels.
You can only selectNDeselect All when there is a selected channel.
Auto Program
For further details on setting up options, refer to page 12.N
Channel List Option Menu (in Programmed)
You can view, modify or delete a reservation.
Press the TOOLS button to use the option menu.N
Change Info
Select to change a viewing reservation.
Cancel Schedules
Select to cancel a viewing reservation.
Information
Select to view a viewing reservation. (You can also change the
reservation information.)
Select All
Select all reserved Programs.
1 / 1 / 2009
9:08 am 5 TV3 The
3:15 pm 2 TV3 The Equalizer
5:50 pm 2 TV3 McMillan & Wife
Programmed
Change Info
Cancel Schedules
Information
Select All
Air Zoom Select
T Tools E Information
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3 Alice’s Adventures in Wonderland
All Channels
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
Auto Program
Air Zoom Select
T Tools
BN59-00905F_eng.indd 14 2009-11-10 9:30:42

English - 15
PICTURE CONTROL
ConguringthePictureMenu(TV/AV/HDMI)¦
Mode❑
You can select the type of picture which best corresponds to
your viewing requirements.
Dynamic
Selects the picture for increased denition in a bright room.
Standard
Selects the picture for the optimum display in a normal
environment.
Movie
Selects the picture for viewing movies in a dark room.
Backlight❑/ Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several setting options that allow you to control the picture quality.
Backlight●: Adjusts the brightness of LCD back light.
Contrast●: Adjusts the contrast level of the picture.
Brightness●: Adjusts the brightness level of the picture
Sharpness● : Adjusts the edge denition of the picture.
Color●: Adjusts color saturation of the picture.
Tint (G/R)●: Adjusts the color tint of the picture.
When you make changes to “NBacklight”, “Contrast”, “Brightness”, “Sharpness” “Color”or “Tint
(G/R)” the OSD will be adjusted accordingly.
Settings can be adjusted and stored for each external device you have connected to an input ofNthe TV.
The energy consumed during use can be signicantly reduced if the level of Backlight is reduced, Nand that this will reduce the overall running cost.
Advanced Settings❑
Samsung’s new TVs allow you to make even more precise
picture settings than previous models.
Advanced SettingsNis available in Standard or Movie mode .
In PC mode, you can only make changes toNGamma and
White Balance from among the Advanced Settings items.
BlackTone→Off/Dark/Darker/Darkest
You can select the black level on the screen to adjust the screen
depth.
DynamicContrast→Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary color (red, green, blue) Intensity. (-3 ~ +3)
Color Space
Color space is a color matrix composed of red, green and blue colors. Select your favorite color
space to experience the most natural color.
Native●: Native Color Space offers deep and rich color tone.
Auto●: Auto Color Space automatically adjusts to the most natural color tone based on program sources.
Mode  :Standard  ►
Backlight : 8
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Picture
Advanced Settings
Black Tone : Off ►
Dynamic Contrast : Medium
Gamma : 0
Color Space : Native
White Balance
Flesh Tone : 0
Edge Enhancement : On
U Move E Enter R Return
BN59-00905F_eng.indd 15 2009-11-10 9:30:42

English - 16
White Balance
You can adjust the color temperature for more natural picture colors.
R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain●: You can adjust the Color ‘temperature’
in the light areas by changing the values of R, G, B. Recommended for advanced users only.
Reset●: The previously adjusted white balance will be reset to the factory defaults.
Changing the adjustment value will refresh the adjusted screen.N
Flesh Tone
You can emphasize the pink ‘esh tone’ in the picture.
Changing the adjustment value will refresh the adjusted screen.N
EdgeEnhancement→Off/On
You can emphasize object boundaries in the picture.
Picture Options❑
In PC mode, you can only make changes to the “NColor Tone”
and “Size” from among the items in “Picture Options”.
Color Tone→Cool / Normal / Warm1 / Warm2
Warm1Nor Warm2 is only activated when the picture mode is Movie.
Settings can be adjusted and stored for each externalNdevice you have connected to an input of the TV.
Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes with
six screen size options, each designed to work best with specic types of video input. Your satellite
receiver may have its own set of screen sizes as well. In general, though, you should view the TV in
16:9 mode as much as possible.
Alternately, you can press theOP.SIZE button on the remote control repeatedly to change the picture size.
16:9●: Sets the picture to 16:9 wide mode.
Zoom1● : Magnies the size of the picture on the screen.
Zoom2● : Magnies the size of the picture more than “Zoom1”.
Wide Fit● : Enlarges the aspect ratio of the picture to t the entire screen.
4:3●: Sets the picture to 4:3 normal mode.
Screen Fit:●Use the function to see the full image without any cutoff when HDMI
(720p/1080i/1080p) or DTV (1080i) signals are input.
16:9 Zoom1
U Move Zoom2
U Move
16:9 Zoom1 Zoom2
Wide Fit U Move 4:3 Screen Fit
Wide Fit 4:3 Screen Fit
Picture Options
Color Tone : Normal ►
Size : 16:9
Digital NR : Auto
HDMI Black Level : Normal
Film Mode : Off
U Move E Enter R Return
BN59-00905F_eng.indd 16 2009-11-10 9:30:42

English - 17
Temporary image retention may occur when viewing a static image on the set for more than two hours.N
After selecting “NZoom1”, “Zoom2” or “Wide Fit”: Press the ◄ or ► button to select “Position”, then
press the E button. Press the ▲ or ▼ button to move the picture up and down.
Reset: Press the ◄ or ►button to select “Reset”, then press the Ebutton. You can initialize the setting.
HD (High Denition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)N
Settings can be adjusted and stored for each external device you have connected to an input of the TVN .
Input Source Picture Size
TV, AV 16:9, Zoom1, Zoom2, 4:3
DTV(1080i), HDMI (720p, 1080i, 1080P) 16:9, 4:3, Wide Fit, Screen Fit
Digital NR→Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.N
HDMI Black Level→Normal / Low
You can select the black level on the screen to adjust the screen depth.
This function is active only when an external device is connected to the TV via HDMI. The “NHDMI
Black Level” function may not be compatible with all external devices.
Film Mode→Off / Auto
The TV can be set to automatically sense and process lm signals from all sources and adjust the
picture for optimum quality.
“NFilm Mode” is supported in TV and HDMI (480i / 1080i).
Reset❑→ResetPictureMode/Cancel
Resets all picture settings to the default values.
Reset Picture ModeN: Current picture values return to default settings.
BN59-00905F_eng.indd 17 2009-11-10 9:30:42

English - 18
Using Your TV as a Computer (PC) Display¦
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. However, even if your actual screens look different, the same basic set-up information
will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on ‘Control Panel’ on the Windows start menu.
2. When the control panel window appears, click on ‘Appearance and Themes’ and a display dialog-
box will appear.
3. When the control panel window appears, click on ‘Display’ and a display dialog-box will appear.
4. Navigate to the ‘Settings’ tab on the display dialog-box.
The correct size setting (resolution): Optimum: 1360 X 768 pixels
If a vertical frequency option exists on your display settings dialog box, the correct value is “60” or
“60 Hz”. Otherwise, just click “OK” and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically.
If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to
your videocard user guide; otherwise there may be no video. For the display modes listed below, the
screen image has been optimized during manufacturing.
Timing modes(PC, DVI-D and HDMI input)
Mode Resolution Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H / V)
IBM 640 x 350 31.469 70.086 25.175 + / -
640 x 480 31.469 59.940 25.175 - / -
720 x 400 31.469 70.087 28.322 - / +
MAC 640 x 480 35.000 66.667 30.240 - / -
832 x 624 49.726 74.551 57.284 - / -
VESA 640 x 480 37.861 72.809 31.500 - / -
640 x 480 37.500 75.000 31.500 - / -
800 x 600 35.156 56.250 36.000 + / +
800 x 600 37.879 60.317 40.000 + / +
800 x 600 48.077 72.188 50.000 + / +
800 x 600 46.875 75.000 49.500 + / +
1024 x 768 48.363 60.004 65.000 - / -
1024 x 768 56.476 70.069 75.000 - / -
1024 x 768 60.023 75.029 78.750 + / +
1360 x 768 47.712 60.015 85.500 + / +
BN59-00905F_eng.indd 18 2009-11-10 9:30:42