Samsung WMN-M12E User manual

SI\MSUNG
Cautions
when
installing
,,
...
Mod
,
~l
n.
att1e
>
}.
•••••••••••••
•
•••••••••••
.<
I'
WMN-Ml2E
'
"'
..
,·
'
..
J
Width (mm) 520
Height (mm) 280.3
Thickness (mm)
15.9
TV
tilt
(
0)
Max.10°
Package
size
(W
x Dx
H)
(mm)
594
X
337
X
75
Package
weight (kg) 3.5±0.5
Max.
allowable
TV
weight (kg)
35
Standard stud distance
16
11
supported
I
24
11
not supported
2017Y
SAMSUNG
TV
Q7
Series, 49/55/65"
(0
mm or more)
2017Y
SAMSUNG
TV
Q8
Series, 49/55/65"
(0
mm or more)
Compatible
TVs
2017Y
SAMSUNG
TV
Q9
Series, 49/55/65"
(6
mm
or more)
Clearance from the wall (mm)
2018Y
SAMSUNG
TV
Q7
Series, 55/65"
(0
mm or more)
2018Y
SAMSUNG
TV
Q8
Series, 55/65" (0 mm or more)
2018Y
SAMSUNG
TV
Q9
Series, 55/65"
(7
mm or more)
•
Be
sure to
use
the
components and parts provided
for
installing the
wall
mount.
•
The
manual instructions and provided parts are based
on
the typical walls (made
of
wood
or
concrete).
(In
case
of
the
WMN-M12E(A)
model,
the
drywall
mounting parts are additionally provided.)
•
In
case
of
the other
cases,
use separate mounting parts or perform
wall
reinforcement in advance. If required, install
the
wall
mount
with
an
aid
of
expert.
•
Be
cautious not
to
damage the
TV
screen while installing the
wall
mount.
• Check your
TV's
model series. Then
use
the appropriate preparation methods
for
the support frames using
the
appropriate screws.
• Ifyou
do
not
follow
the installation instructions suitable
for
your
TV
model, the
wall
mount
and
TV
connection may
be
unstable.
Q
[]
g
E]
.
.
.
·o·
·r-~·
,s,
2017Y
Q7FM/Q7CM/Q8CM
2017Y
Q9FM
2018Y
Q7FN/Q7CN/Q8CN
2018Y
Q9FN
-English
2-

• When installing or uninstalling the wall mount supportframe, make sure 2 people work on it, and the TV is off.
•
Use a flat tablewhen installing the wall mount. Use the TV packing material(cushion) for curved TVs.
Flat TV
Curved TV
• Install the wall mount onlyon the wall that is larger than the TV and is not tilted. After installation, the cover or
attachment at the bottom of the TV must touch the wall. Otherwise, the wall mount must not be installed.
Wall
that is largerthan TV
(lnstallable) T
il ted wall
(Not installable) Wall that
is not largerthan the
wall mount
(Not installable)
• Before mounting
the TV to a wall, connect the powercable and One Connect cable to the TV.
•
Use the included 3 m powercable if the wall-mounted TV and pow er socket are morethan 1.5 m apart.
• When installing I uninstalling
the wall mount, be careful not to damage the opticalcable. Especially, be careful not
to step on the optical cable.
•
Use a screwdriver to assemble the TV to the supportframe. Using an electric screwdrivermaycause screw threads
to wearout.
• The minimum distance between
the TV and wall may be 2-3 mm or more depending on the wall surface or
installationconditions.
• The distance between
the wall and the left or right side of the TV may differ depending on the wall and installation
conditions.
• When installing the
wall mount, if the TV is too close to awall, scratches may occuron the back of the TV or on awall.
• A
lot of force is required to open the bracket before installing the wall mount. Be careful not to hurt yourselfwhen
opening
the bracket. (Brackets with tilt options are difficult to open because they need to withstand the weight of
the TV.)
- English 3 -

•
In
cases
with
tight
installation conditions, friction between
the
TV/accessories and the
wall
may damage the
wall
or
the
back
of
the
TV.
Use
a scratch
protector8
as
in
the picture in such
cases.
However, distance from
the
wall
may
increase.
(,:)
~
•
You
must
use
8 parts
as
in
the
picture
to
attach
Q9
series
TVs.
This restricts movement between the
TV
and
wall
due
to
distance from the
wall
and prevents the
TV
from leaning forward.
If
the
TV
leans forward, use 2 overlapping 8 parts. This may
additionally
improve
the
inclination.
However, distance
from
the
wall
may increase.
[J
.
• Acurved
TV
may move
left
and
right
afterbeing installed to the
wall
mount.
You
can
suppress the
TV
from moving
left
and right
by
using accessories
e-CO
together. (Adjust the horizontal length
of
the part
to
be
the
same.)
You
can
also suppress a Flat
TV
from
moving
left
and
right
by using accessories
e-e.
However, distance
from
the
wall
may increase.
9
I e
I
~
~
•
~
Flat
TV
-English
4-
I
I
'0
9--e
;
~
~
~~.
'-P
!1?
--------~--------~
¥
I
y
Curved
TV

• If there is a protruding part on the wall where you wantto install the wall mount,you may use accessoriese-e to
secure enough distance between the TV and awall. (Adjust the horizontal length of the part to be the same.)
However,
the distance to the wall will become larger.
9
I
t
I
~
9""----e
I
,._t -e
~~---C&
,.~
-~·
*
• Ifyou secure distances using thoseaccessories, you may not be able to use the tilt option. If you wantto use the tilt
option, the secured distance is limited.
•
The maximum tilt angle differs depending on the TV model. The tilt angle may not be maintained on the wall with
vibration.
•
After wall mount installation, movement mayoccur on some TV models depending on the rearshape of the TV. In
this
case, use the separation holder (0).
Triangular support allows more stable wall mount installation. However, distance from the wall may
increase.
-
English 5-

• Ifyou cannot adjust the horizontal level by using the horizontal adjustment function, check
if
the installation was
done properly.
If
you cannot
use
the
horizontal adjustmentfunction,
the
fixers
on
the
wall
mount's support frame are not
properlyfixed. Make sure
to
install them properly.
•
The
horizontal level
that
can
be
adjusted
is
just
1to 2 degrees.
To
adjust the horizontal level
at
more angles than this
range, reinstall
the
wall
mount.
-
---~-~-~-~-~-----
---
----~=-=-~-~-~-~-~-
- -
l t t l
• Ifthe wall mount's fixers are
not
fixed
to
the end
as
shown
in
the
figure, subtle impacts may move the
TV.
In
this
case,
make sure to install the fixers properly
so
that
theyare fixed to the
TV
all
the way
to
the end.
•
To
prevent cable damage when dismounting the
TV
from the wall, disconnect
the
powercable and the optical cable
before removing
the
wall mount.
• When detaching the
TV
from
the
wall,
first
pull
it
forward, and then
be
sure
that
two
people
pull
it
upward
simultaneously.
Do
not apply directforce
on
the display.
-English
6-

• When you grab the TV to install, remove, adjust the horizontal level, or tilt the wall mount, do not applydirectforce
on the display.
• When you handlethe
TV to install , remove, adjust the horizontal level, or tilt the wall mount, be careful not to
damage anycables.
•
Be sure that the TV and wall mount stand are not hit wi th excessive force after installing the wall mount. The wall
mount or TV maybe damaged or the TV connection with the wall mount device maybecome unstable.In this case,
reinstall the wall mount or consult an expert for assistance.
• Check
the product model as well as the enclosed usermanual for each productand check that the wall allows
mounting.
-
Be sure the wall is stable. If the wall is weak, reinforce it before installation.
-
If the wall is not cement, check with a specialist to determine whether the TV maybe installed on it.
-Consult
an expert installer if you do not have any background knowledgeabout the wall you want to install the
producton.
•
To maintain product performance and prevent malfunctions, do not install in the following locations.
-Places wherethere is a risk
of vibration orshock: The product may fall and be damaged.
-Next to a sprinklersensor: The sensor may detectthe heat from the TV and sprinklers may start.
-Nearhigh-pressure cables: The
TV may get interfered by high-pressure cable and the screen may not display
correctly.
-Nearheaters: The
TV may become overheated and malfunction.
-Do
not installanywhere other than avertical wall.
-Install
it out of the reach of children.
-
Do not penetrate the wall to install inside.
............................................
........ ... ............. .. .......... .. .... ..
........ . .......... . .... . ...................
B A B
- Be sure to check the typeand condition of the wall you will
install on.
Materials
to be used may differ depending on wall type.
Choose materials based on
the specifications below.
-
You do not need to use all the supplied screws. However,
you
must use at least4 screws.
You must use screws in the two locations marked as A.
-Choose
at least2 of the parts marked B to assemble
depending on surroundings.
-
To hide the cables inside the wall, contactan expert
installer .
-English 7-

-··········
.......................................
.
...................................
:·············-···-··-······-···
"
(II
~
4 5

6
. 0 I
·
~lL:x
C
.
('cr~
l
,,
'·
:J
.
~l~!
:
~
:.
' \
-i
----
f-
·i
i
I i
t"
7
[English]
..............................
..............................
B A B r·
"
c:
.
:
B
(-_":
B
A
:L_
..............................
······························
..............................
-You must install
screws
in
the two locations marked
as
A.
-When
you
attach the wall mount to t
he
wall, install
sc
r
ews
on eithersi
de
of
the
screw
holes marked A
in
at least two of the
places
marked
B.
[
Fr
a
n
~a
i
s]
-
Vous
devez
utiliser
des
vis
aux
deux
emplacements marques
d'un
A.
-
Lorsque
vous
fixez
le
support mural
sur
lemur,
placez
les
vis
dans
les
orifices
indiques
par
unA
dans
au
mains
deux
emplacements indiques parun
B.
[E
spanol
l
-Debe utilizartornillos
en
las
dos
ubicaciones
marcadas
como
A.
-
Para
fijarel soporte
en
Ia
pared,
instate tornillos a
cad
a
tado
de
los agujeros
marcados
como
A
en
at
me
nos
dos
ubicaciones
marcadas
como
B.
8 9
)
/
Concrete, Bnck
I
Beton,
bnque
I
Concreto, ladnllo
[Englis
h]
-Pleased refer
to
the
included
flyer
"Standard Installation Requirements by
Walt
T
ype~
for
the
materials needed and steps required
to
mount th
ew
all
mo
u
nt
on
your
wall
type.
-If
you are
not
su
re
about
the
wall type you have or
abo
ut the
mate
r
ia
ls you
need to install the wall mount, consult a professional insta
ll
er.
[Fran\ais]
-
Veuillez
vous
repor
t
er
au
depliant indus«
Exigences
ge
nerales d'installation
par
type
demur>>
po
ursavoirquels sont
les
materiels
requ
is
et
les
eta
pes
a
su
ivre
pour
installer
le
support
mu
r
al
survotre
mur.
-
Si
vous
n'etes
pas
sUr
de
quel
type
est
votre
murau
des
materiels
requis
pour
installer
le
support
mural,
veuillez
consulterun
installateur
profession
net.
[Espanol]
-
Consulte
el
fo
ll
eto
"Requisites
de
instalaci6n estilndar
segUn
el tipo
de
pared"
provisto
para
conocer
l
os
materiales
necesarios
y
los
pasos
requeridos
para
instalarel
soporte
en
cada
tipo
de
pared.
-
Si
no
esta
seguro
de
conocer
Ia
com
posiciOn
de
su
pared
o
los
materiales
necesarios
para
instalarel
soporte,
comuniquese
con
un
instalador
profesional.
10
l