Samsung SNV-3120 User manual

NETWORK CAMERA
User Manual SNV-3120

Copyright
©2011 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall
be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no
formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own
responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.
Warranty
If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve the
problem for free of charge. The warranty period is 3 years. However, the followings are excluded:
•If the system behaves abnormally because you run a program irrelevant to the system operation.
•Deteriorated performance or natural worn-out in process of time
Design and specifications are subject to change without prior notice.
The default password can be exposed to a hacking thread so it is recommended to change the password
after installing the product.
Note that the security and other related issues caused by the unchanged password shall be responsible
for the user.
Network Camera
User Manual

English _3
●OVERVIEW
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety, If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, conve-
nience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for
long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
overview

overview
4_ overview
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC
OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS
ON THE EQUIPMENT.
Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the product.

English _5
●OVERVIEW
Class construction
An apparatus with CLASS construction shall be connected to a MAINS
socket outlet with a protective earthing connection.
Battery
Batteries(battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
Disconnection Device
Disconnect the main plug from the apparatus, if it’s defected. And please call
a repair man in your location.
When used outside of the U.S., it may be used HAR code with fittings of
an approved agency is employed.
CAUTION
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do so.
The BNC Out terminal of the product is provided for easier installation, and is
not recommended for monitoring purposes.
If you keep the BNC cable connected, a risk of lightening may cause damage
or malfunction to the product.
Please use the input power with just one camera and other devices must not
be connected.

overview
6_ overview
Please read the following recommend safety precautions carefully.
User’s Manual is a guidance book how to use the products
The meaning of the symbols are shown below.
Reference : In case of providing information for helping of product’s usages
Notice : If there’s any possibility to occur any damages for the goods and
human caused by not following the instruction
Please read this manual for the safety before using of goods and keep it in
the safe place.
Do not place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct
sunlight, near heating equipment or heavy cold area.
Do not place this apparatus near conductive material. Do not attempt to service this apparatus yourself.
Do not place a glass of water on the product. Do not install near any magnetic sources.
Do not block any ventilation openings. Do not place heavy items on the product.

English _7
●OVERVIEW
CONTENTS
OVERVIEW
3
3Important Safety Instructions
9Product Features
9Recomended PC Specifications
10 Recomended
SD/SDHC Memory
Card Specifications
10 What’s Included
12 At a Glance
INSTALLATION &
CONNECTION
15
15 Installation
21 Inserting/Removing an SD
Memory Card
22 Memory Card Information
(Not Included)
23 Connecting with other Device
NETWORK CONNECTION
AND SETUP
26
26 Connecting the Camera Directly
to Local Area Networking
27 Connecting the Camera Directly
to a DHCP Based DSL/Cable
Modem
28 Connecting the Camera Directly
to a PPPoE Modem
29 Connecting the Camera to a
Broadband Router with the
PPPoE/Cable Modem
30 Buttons used in IP Installer
31 Static IP Setup
34 Dynamic IP Setup
35 Port Range Forward (Port Mapping)
Setup
37 Connecting to the Camera from a
Shared Local PC
37 Connecting to the Camera from a
Remote PC via the Internet

overview
8_ overview
CAMERA SETUP
47
47 Using the Camera Menu
47 Configuring the Main Menu
48 Setting up the Camera
53 Other Setup
54 Checking the System Information
SETUP SCREEN
55
55 Setup
55 Audio & Video Setup
59 Network Setup
64 Event Setup
70 System Setup
APPENDIX
75
75 Specification
79 Product Overview
81 Troubleshooting
83 Open Source Announcement
85 GPL/LGPL Software License
WEB VIEWER
38
38 Connecting to the Camera
39 Login
40 Installing Silverlight Runtime
42 Using the Live Screen
45 Playback
46 Playing the backup recordings

English _9
●OVERVIEW
PRODUCT FEATURES
HD Video Quality
Multi-Streaming
This network camera can display videos in different resolutions and qualities simultane-
ously using different CODECs.
MHowever, MPEG-4 video can not be played on a web page. Use CMS software if you want to play
the video on a web page.
Web Browser-based Monitoring
Using the Internet web browser to display the image in a local network environment.
Alarm
If an event occurs, the event-related video will be transferred to the email specified by the
user or saved to the SD memory, or the event signal will be sent to the Alarm Out port.
Intelligent Video Analysis
Analyzes the event video according to the user-specified rules to recognize the event.
ONVIF (Spec 1.02) Compliance
This product supports ONVIF Core Spec. 1.02.
For more information, refer to www.onvif.org.
RECOMENDED PC SPECIFICATIONS
CPU : Intel(R) Core(TM)2 2.00 GHz or higher
Operating System : Windows XP, VISTA, 7
Mac OS
Resolution : 1280X1024 pixels or higher
RAM : 1GB or higher
Web Browser :
Internet Explorer 6.0 or higher, Firefox, Chrome, Safari
Neither a beta test version unlike the version released in the company website nor the developer version will
be supported.
On Firefox v3.5 or higher, displaying warning message dialog may cause an error.
If connecting to IPv6 in Windows XP, it can cause some problem.
It is recommended to connect to IPv6 in Windows 7.
Video Memory : 128MB or higher

overview
10_ overview
RECOMENDED SD/SDHC MEMORY CARD SPECIFICATIONS
2GB ~ 32GB
To ensure proper recording of video data, we recommend you use a memory card that
supports at least read/write speed 10Mbps and Class 6.
WHAT’S INCLUDED
Please check if your camera and accessories are all included in the product package.
Appearance Item Name Quantity Description
User Manual,
Installer S/W CD,
CMS S/W DVD
2
Quick Guide 1
Jack Modular 1 LAN cable gender
Cable for the testing monitor 1 Used to test the camera connection to a
portable display device
Alarm Cable 1 Used to connect to Alarm I/O
Template 1 Product installation guide

English _11
●OVERVIEW
Appearance Item Name Quantity Description
ASSY-Tapping Screw 4 Used for installation on the wall or ceiling
L Wrench 1 Used to remove/fix the dome cover
Plastic Anchor 4For fixing a screw, Inserted in a hole
(reinforced anchoring force)
Machine Screws 4
Used for assembling the dome case when
installing the product on the pipe, wall
mount, etc. or blocking a hole.
M The Test Monitor Cable is connected to a portable displayer and used for testing the camera.
If you intend to use it for an actual monitoring camera, use the BNC cable instead.

overview
12_ overview
AT A GLANCE
Appearance
Item Description

Dome Cover Dome cover for the lens and unit protection.
b
Main unit Main unit includes the lens, switch board, PCB boards and screws.
c
Power Port Used to plug the power cable.

Video Out Port Analog video output port. (for installation)

Network Port Used to connect a PoE or LAN cable.

Audio In Jack Used to connect to a microphone.

Audio Out Jack Used to connect to speakers.

English _13
●OVERVIEW
Inside
Item Description

Alarm In / Out
terminals
ALARM IN Used to connect the alarm input signal.
ALARM OUT Used to connect the alarm output signal.
ALARM COM Common port where the alarm output signal is connected.
GND Used for earth-grounding.
b
SD Memory Card
Compartment
Compartment for the SD memory card.
c
Reset Button
Resets the camera settings to the default. Press and hold it for about 5
seconds to restart the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
3

overview
14_ overview
Components
Item Description

Inner Cover Cover for the main unit’s protection.
b
Side wing hooks By lifting it while gently pressing the both ends, you can separate the inner
cover.
c
Heater Activated when the ambient temperature is under 5ºC to prevent the dome
cover from being covered with frost.

Monitor Out Using the test monitor cable, you can connect to a mobile display for camera
test.
3

English _15
●INSTALLATION & CONNECTION
INSTALLATION
Disassembling
To connect the alarm in/out, the dome cover and lens cover are to be separated.
1. Using the L-wrench provided, loosen 3
screws by turning them counterclockwise
and separate the dome cover.
2. Lift up the inner cover while gently pressing
its both ends to separate it from the unit.
3.
Loosen 3 screws by turning them counter-
clockwise, press both left and right lock re-
leases inwards (in arrow direction) to unlock
the stopper, and then separate the camera
from the case.
Dome Cover
Inner Cover
Camera Body
Case
installation & connection

installation & connection
16_ installation & connection
Optional Accessories for Installation
For your easier installation, you can purchase appropriate optional accessories available.
1. WALL MOUNT ADAPTOR(SBP-300WM or
SBP-300WM1)/HANGING MOUNT(SBP-
300HM1)
This adaptor is used when installing the
dome camera onto a wall.
2. CEILING MOUNT ADAPTOR(SBP-300CM)/HANG-
ING MOUNT(SBP-300HM1)
This adaptor is used when installing the dome cam-
era on a concrete ceiling.
3. POLE MOUNT ADAPTOR(SBP-300PM)
This is an adaptor for WALL MOUNT ADAPTOR
(SBP-300WM or SBP-300WM1) installation on a
pole whose diameter is bigger than 80mm.

English _17
●INSTALLATION & CONNECTION
4. CORNER MOUNT ADAPTOR (SBP-300KM)
This is an adaptor for WALL MOUNT ADAP-
TOR (SBP-300WM or SBP-300WM1) installa-
tion on the corner of wall joint.
Installing on the ceiling directly
1. Using the L-wrench provided, loosen 3 screws
by turning them counterclockwise and separate
the dome cover.
2.
Loosen 3 screws by turning them counterclock-
wise, press both left and right lock releases in-
wards (in arrow direction) to unlock the stopper,
and then separate the camera from the case.

installation & connection
18_ installation & connection
3. Drill a hole (diameter: 5mm, depth: min 35mm) at a
desired position while aligning to a hole of the case
bottom and fully insert the provided plastic anchor
(HUD 5) into the hole. Align the hole of the case
bottom to the inserted anchor, and fasten the ASSY
tapping screw (TH M4xL30).
M When assembling the camera case to a junction box,
select appropriate screw holes on the case bottom for
installation.
4. Connect power and video cables and arrange cable
running not to damage or squeeze them, and as-
semble the camera unit in the reverse way.
5. Adjust the lens aiming to your desired direction.
6. Assemble the Dome Cover.
For waterproof purpose, fix and secure the bolt
using L-wrench provided.
CAMERA FRONT

English _19
●INSTALLATION & CONNECTION
Flushed installation on the ceiling
1. Using the provided template, drill a hole for the camera unit and fixing holes (diameter
5mm, more than 35mm deep) on the ceiling. Insert the plastic anchors (HUR-5) fully
into the fixing holes.
2. Separate the dome cover and case.
For separating dome cover and case, refer to the “Installing on the ceiling directly”.
3. Connect power and video cables and arrange cable running not to damage or
squeeze them.
4. Remove the case assembly screws from the
camera module.
5. Insert the camera module into the camera
hole, and install it by fastening the Tapping
Screws (TH, M4xL30) by matching the fixing
holes (3 places).
6. Assemble the Dome Cover.
Refer to the “Installing on the ceiling di-
rectly”.

installation & connection
20_ installation & connection
Adjusting the monitoring direction for the camera
❖Adjusting the monitoring direction
You can adjust the camera direction only when the camera is fixed on the ceiling.
Then, turning the camera to the left or right is referred to as “Panning”, while tilting the
angle is “Tilting”. For panning, the panning limit is 220° for the clockwise, and 135° for the
counterclockwise, a total of 355° enabled; further rotation is stopped by the stopper.
- Adjust the panning angle so that the camera settles in the right horizontal position.
You can adjust the panning up to 135° in each one direction, and 220° in the other
direction, a total of 355°.
- Adjust the tilting angle so that the camera settles in the right vertical position. You can
adjust the tilting between 0° and 90°.
- The total rotation range is 355°. You can make adjustment in one direction up to
125°, and 230° in the other direction.
❖Methods of adjustment
The case of wall installation
①After mounting the camera on the wall, adjust the panning angle so that the camera
faces a desired direction when tilting.
②Adjust the Rotate position to fit the video to the screen borders.
③Then, adjust the tilting angle so that the camera faces the monitoring direction.
The case of ceiling installation
①After mounting the camera on the ceiling, adjust the panning angle according to
the monitoring direction. You should adjust the panning angle lest that the video be
displayed upside down on the monitor.
②Adjust the Rotate position to fit the video to the screen borders.
③Then, adjust the tilting angle so that the camera faces the monitoring direction.
J For smoother Rotate adjustment, set the Tilt position between 60° ~ 80°.
Panning
Tilting
Lens rotation
0˚
60˚ ~ 80˚