Samsung SCO-6023R User manual

High Resolution IR Bullet
Camera
User Manual
SCO-6023R

High Resolution IR Bullet Camera
User Manual
Copyright
©2016 Hanwha Techwin Co., Ltd. All rights reserved.
Trademark
Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this
manual are the registered trademark of their respective company.
Restriction
Copyright of this document is reserved. Under no circumstances, this document shall be reproduced,
distributed or changed, partially or wholly, without formal authorization.
Disclaimer
Samsung makes the best to verify the integrity and correctness of the contents in this document, but no
formal
guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s
own responsibility. Samsung reserves the right to change the contents of this document without prior notice.
Design and specifications are subject to change without prior notice.

Before operating the camera, confirm the camera model and correct input power voltage.
To help you understand this manual thoroughly, we'll introduce our model description.
■ SCO-6023R SERIES
• NTSC MODEL • PAL MODEL
SCO-6023RN SCO-6023RP
■ MODEL DESCRIPTION
• SCO-6023RX
_
• SIGNAL SYSTEM
N→NTSC MODEL
P→PAL MODEL
SIGNAL SYSTEM

4_ safety information
safety information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric
shock is present within this unit.
This exclamation point symbol is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING
• To prevent damage which may result in fire or electric shock hazard, do not expose this
appliance to rain or moisture.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with
the installation instructions.
WARNING
1. Be sure to use only the standard adapter that is specified in the specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire,
electric shock, or damage to the product.
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause
abnormal heat generation or fire.
4. Securely plug the power cord into the power receptacle. insecure connection may cause
fire.
5. When installing the camera, fasten it securely and firmly. The fall of camera may cause
personal injury.

English_5
●SAFETY INFORMATION
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers
filled with water on top of the camera. doing so may cause personal injury due to fire, electric
shock, or falling objects.
7. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or electric
shock.
8. If any unusual smells or smoke come from the unit, stop using the product. in such case,
immediately disconnect the power source and contact the service center. continued use in
such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center. never disassemble
or modify this product in any way. (samsung is not liable for problems caused by unauthorized
modifications or attempted repair.)
10. When cleaning, do not spray water directly onto parts of the product. doing so
may cause fire or electric shock.
CAUTION
1. Do not drop objects on the product or apply strong shock to it. Keep away from a location
subject to excessive vibrationor magnetic interference.
2. Do not install in a location subject to high temperature (over 55°C), low temperature (below
-30°C), or high humidity. Doing so may cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power and then
move or reinstall it.
4. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so
may cause fire or damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may
damage the CMOS image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.
10. Do not expose the camera to radioactivity. Radioactivity exposure may damage
the CMOS.

6_ safety information
safety information
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received including interference that may cause
undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at
his own expense.
IC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian
Interference.-Causing Equipment Regulations of ICES-003.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

English_7
●SAFETY INFORMATION
important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Use only with cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus.
13. Unplug this apparatus when a card is used. Use caution when
moving the cart/ apparatus combination to avoid injury from tip-over.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as powersupply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus
Samsung cares for the environment at all product manufacturing stages, and
is taking measures to provide customers with more environmentally friendly
products.
The Eco mark represents Samsung’s devotion to creating environmentally friendly
products, and indicates that the product satisfies the EU RoHS Directive.

8_ contents
contents
INTRODUCTION
9
9Features
10 Components and Accessories
11 Component names and
functions
CONNECTION
13
13 Connecting to Monitor
13 Connecting to Power
14 Using Coaxial Communications
CAMERA OPERATION
16
16 Menu Configuration
16 Menu Setup
TROUBLESHOOTING
28
28 Troubleshooting
SPECIFICATIONS
29
29 Specifications
31 Dimension

English_9
●INTRODUCTION
introduction
FEATURES
yHigh Resolution
Use of a 2M pixel CMOS device provides clear pictures with a horizontal resolution of
1000TVL.
yExcellent Sensitivity
The built-in high sensitivity COLOR CMOS produces a clear image.
- Color : 0.45Lux (F2.1, 50IRE); 0.25Lux (F2.1, 30IRE)
B/W : 0Lux (IR LED on)
ySSNR4 (Samsung Super Noise Reduction) Function
High performance NVP2440H Chip removes noises of GAIN resulting from the low light
level and shows a vivid, high definition video even in the dark place.
yDay&Night
This camera has a function that automatically selects the mode that is appropriate
for daytime or night-time conditions. The COLOR mode operates in daytime
conditions to provide optimum colors, and B/W mode operates in night-time
conditions to enhance the definition of the image.
yPROFILE
You can set a mode according to the camera installation conditions.
- BASIC, DAYNIGHT, BACKLIGHT, ITS, INDOOR, USER
yD-WDR
By adopting a proprietary NVP2440H chip, the camera delivers clear, high quality
pictures even in backlight, by increasing exposure in dark areas while decreasing it in
bright areas; a corrected image with clear details results.
yMiscellaneous Functions
HLC(High Light Compensation), REVERSE , SHARPNESS and PRIVACY functions
are provided.
yCommunication
Coaxial communication methods are supported.
- Coaxial Communications : ACP(Analog Coaxial Protocol)
yOSD
The camera’s OSD is complimented by 16 languages.
- English, Korean, Japanese, German, Italian, French, Spanish, Russian, Czech,
Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese

10_ introduction
introduction
COMPONENTS AND ACCESSORIES
Check if the following items are included in the product package.
SCO-6083R
SCO-6023R Quick Manual Screws
SCO-6083R
Template
High Resolution IR Bullet
Camera
User Manual
SCO-6023R

English_11
●INTRODUCTION
COMPONENT NAMES AND FUNCTIONS
1 Camera Sunshield
2 Knob Sunshield : Fixing the sunshield onto the camera.
3 Function Setup Switch : Display the menu on the screen and move the cursor to four
directions to confirm status or after changing a selected item.
➍ Front cover
M
`The installation should be done by qualified service personnel or system installers.
`If the ceiling material is not strong enough to hold the installation screws, the camera
may fall off. Reinforce the ceiling as needed.
Front
2
13
➍

12_ introduction
introduction
Back
jh|{pvua iGGG
yG}GGw
GGGU
➎
➏
➎ Video output jack : Video signals are output through this port. Connect this port to the Video
IN port of a AHD DVR.
➏ Power input terminal : Connect the designated power supplies.

English_13
●CONNECTION
connection
CONNECTING TO MONITOR
Please connect the Video output jack located on the back of the camera to the AHD DVR.
yAs the connecting method varies with the instruments, refer to the manual supplied
with the instrument.
yOnly connect the cable when the power is turned off.
CONNECTING TO POWER
You can connect power as shown in the following figure.
jh|{pvua iGGG
yG}GGw
GGGU
SCO-6023R
Monitor
Power Input Terminal
jh|{pvua iGGG
yG}GGw
GGGU
AHD DVR

connection
14_ connection
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size (AWG) #24 (0.22mm2)#22 (0.33mm2)#20 (0.52mm2)#18 (0.83mm2)
Resistance value(Ω/m) 0.078 0.050 0.030 0.018
Voltage Drop (V/m) 0.028 0.018 0.011 0.006
yAs shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the camera
may affect the performance of the camera.
❈ Standard voltage for camera operation : DC 12V±10%
❈ There may be some deviation in voltage drop depending on the type of wire and the
manufacturer.
M
`Be sure to connect power only after all the installation is complete.
USING COAXIAL COMMUNICATIONS
yCoaxial Communications System
yOSD Control method
CAMERA DVR
SET MENU/ENTER
UP UP KEY
DOWN DOWN KEY
LEFT LEFT KEY
RIGHT RIGHT KEY
● : BNC

English_15
●CONNECTION
Distance
Recommended Cable
Specification
500m 75-5 Coaxial Cable
MM`It is recommended that pure copper coax cable is used and not copper coated steel, as this will
cause issues with the communication over the coaxial cable.
`To ensure picture quality, only single-channel video output connector can be used while camera
connected to other video equipments.
- Video Cable
The camera's video output port is connected to the DVR with a BNC coaxial
cable, shown below.

16_ camera operation
MENU CONFIGURATION
MAIN SETUP
PROFILE
●BASIC ●DAY/NIGHT ●BACKLIGHT
●ITS ●INDOOR ●USER
D-WDR
●ON ●OFF
WHITE BAL
●ATW ●OUTDOOR ●INDOOR
●MANUAL ● AWC SET
EXPOSURE
●BRIGHTNESS ●SHUTTER ●AGC
●SSNR4 ●RETURN
BACKLIGHT
●OFF ●USER BLC ●HLC
SPECIAL
●DISPLAY ●COMM ADJ ●IMAGE ADJ
●VIDEO OUTPUT ●DAY/NIGHT ●DEFOG
●PRIVACY ●MOTION ●RETURN
EXIT
●SAVE ●NOT SAVE ●RESET
MENU SETUP
For function setting, you can use the function setting switch inside the cover.
camera operation
Function Setup switch

English_17
●CAMERA OPERATION
1. Press the Function Setup switch.
yMain SETUP menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
yPlace the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
M
`An item with the icon also has sub menus. To select a sub menu, select an item with the
icon and press the Function Setup switch.
`An item with the --- icon is unavailable due to function settings.
PROFILE
1. When the SETUP menu screen is displayed, select ‘PROFILE’ by using the Function
Setup switch so that the arrow indicates ‘PROFILE’.
2. Select a desired mode using the
Function Setup switch according to
the picture display you want.
yBASIC : The most common envi-
ronment is set to meet.
yDAY/NIGHT : It will be set
automatically so it
optimizes to the day
or night conditions,
respectively.
yBACKLIGHT : It will be set automatically so you can distinguish the object from
the background in a severe backlighting scene.
yITS : It will be set automatically so you can easily check the traffic conditions.
MAIN SETUP
1. PROFILE BASIC
2. D-WDR ON
3. WHITE BAL ATW
4. EXPOSURE
5. BACKLIGHT OFF
6. SPECIAL
7. EXIT SAVE
Change the status
using the Function
Setup switch.
Select the function
using the Function
Setup switch.
MAIN SETUP
1. PROFILE BASIC
2. D-WDR ON
3. WHITE BAL ATW
4. EXPOSURE
5. BACKLIGHT OFF
6. SPECIAL
7. EXIT SAVE

18_ camera operation
camera operation
yINDOOR : It will be set automatically to help you take a picture in a regular indoor
lighting condition.
yUSER : Automatically configures the camera to your custom settings.
1) Select Custom for Simple Setup mode.
2) Configure the menu options to your custom settings.
3) The settings are automatically saved as Custom mode.
4) Profile user mode don't initialize when menu resets.
3. In the PROFILE menu, you can configure the following camera settings at once.
BASIC DAY/NIGHT BACKLIGHT ITS INDOOR USER
SHUTTER 1/5~1/12000 1/5~1/12000 1/5~1/12000
1/200~1/12000 A.FLK -
AGC HIGH HIGH HIGH HIGH HIGH -
WHITE BAL ATW ATW ATW OUTDOOR INDOOR -
BACKLIGHT OFF OFF USER BLC OFF OFF -
SSNR4
ON ON ON ON ON -
DAY/NIGHT AUTO AUTO AUTO AUTO AUTO -
M
`If you select the ITS, the shutter will be set to 1/200 sec. Noise can be detected at night.
D-WDR
When there are both bright and dark areas at the same time, this mode makes both areas
distinctive.
1. When the SETUP menu screen is displayed, select ‘D-WDR’ by using the Function
Setup switch so that the arrow indicates ‘D-WDR’.
2. Select a desired mode using the
Function Setup switch.
yLEVEL :
Adjust the WDR Brightness by
controlling the bar from 1 to 32.
<D-WDR ON> <D-WDR OFF>
D-WDR SETUP

1. LEVEL
IIIIIIIIIIIIIIIIIIIII
15
Press Set To Return

English_19
●CAMERA OPERATION
M
`In D-WDR mode, there can be noise between a bright and dark area.
`Depending on light conditions, unnatural changes or symptoms can occur on the screen so
deactivate the user mode.
White Bal (White Balance)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the
Function Setup switch so that the arrow indicates ‘White Bal’ .
2. Select a desired mode using the
Function Setup switch.
❈ Select one of the following 5modes,
as appropriate for your purpose.
yATW : Select this when the color
temperature is between 1,800K and 10,500K.
yOUTDOOR : Use it in a color temperature range of 1,800K to 10,500K.(including
Natrium). Auto adjustment is made to optimize the camera color to
the outdoor environment.
y
y
y
INDOOR : Select this when the color temperature is between 4,500K and 8,500K.
Automatically adjusts the camera color for optimization to the indoor
environment.
yMANUAL :
Select this to fine-tune White
Balance manually. Set White
Balance first by using the
ATW or AWC mode. After
that button to MANUAL
mode, fine-tune the White
Balance and the Function Setup switch.
yAWC➝SET :
To find the optimal luminance level for the current environment, point the
camera towards a sheet of white paper and press the Function Setup switch.
If the environment changes, readjust it.
MAIN SETUP
1.
PROFILE BASIC
2. D-WDR ON
3. WHITE BAL ATW
WB MANUAL
1. RED GAIN
IIIIIIIIIIIIIIIIIIIII
110
2. BLUE GAIN
IIIIIIIIIIIIIIIIIIIII
138
3. RETURN

20_ camera operation
camera operation
M
`White Balance may not work properly under the following conditions. In this case select the
AWC mode.
1 Select this When the color temperature of environment surrounding the subject is out of
the control range (e.g. clear sky, or sunset)
2 When the ambient illumination of the subject is dim.
`If the camera is directed towards a fluorescent light or is installed in a place where
illumination changes dramatically, the White Balance operation may become unstable.
EXPOSURE
1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the
Function Setup switch so that the arrow indicates ‘EXPOSURE’.
2. Select a desired mode using the Function Setup switch.
yBRIGHTNESS :
Adjusts the video
brightness.
ySHUTTER : You can select the
shutter.
-MIN
: 1 ~ 1/12000
-MAX
: 1/60 ~ 1/12000(NTSC) ,
1/50 ~ 1/12000(PAL)
-A.FLK : Select this when you experience picture flicker, this happen when there
is a clash with the installed lighting frequency.
M
`The greater the shutter value the brighter the screen is but the more the residual images of
objects there are.
`If the min shutter value is large, it can cause noise, spots and white areas but still operate normally.
`If you do not use the AGC mode on the exposure menu, it cannot be set above 1/60sec.
`Depending on the setting range of the minimal/maximal shutter, the screen exposure can
become saturated.
yAGC (OFF/LOW/MIDDLE/HIGH/VERY HIGH) :
The higher the gain level, the brighter the screen - but the greater the noise.
ySSNR4 : This function reduces the background noise in a low luminance environment.
-OFF : Deactivates SSNR4. Noise is not reduced.
-ON : Activates SSNR4 so that noise is reduced.
EXPOSURE SETUP
▶
1. BRIGHTNESS
IIIIIIIIIIIIIIIIIIIII
50
2. SHUTTER
3. AGC HIGH
4. SSNR4 ON
5. RETURN