Samsung WISENET SMARTCAM User manual

Quick Start Guide
WISENET
SMARTCAM

2
Camera Overview
Lens
Microphone
LED Status Indicator
Pairing button
Motion Sensor
What’s in the box
Outdoor, Battery-Powered
Camera
Warranty Card / Quick Start
Guide
Screws / Plastic anchors
Battery(CR123)

3
Camera Power On
Outdoor Battery-Powered Camera
Power on
Create account and register
Station Hub
Connect the power
adapter to the
Station Hub and plug
it into the nearest
wall outlet.
1 2
3
POWER
NETWORK
Wi-Fi
PAIR
User ID : ___________________
User Password : _____________
Camera Name : ______________
Camera Password : ___________
Open the Wisenet
SmartCam+ app and
create an account.
Follow the on-screen
instructions to
register.
Save your Account and Device
information here.
ab

4
STEP 1
POWER
NETWORK
Wi-Fi
PAIR
PAIR
Hold 3 sec
PAIR
Hold 3 sec
Pairing the Camera with
Station Hub
※For every instance the camera is added, the pairing
must be done by pressing the [PAIR] button on each
side.
Paired
Paired
Pairing
Pairing
※You can add Battery-Powered Cameras. Register
additionally by repeating STEP 1 to pair with the
station hub.
POWER
NETWORK
Wi-Fi
PAIR

5
Mounting the Camera
Note: If you are
mounting the
camera on the wall,
carefully separate
the bracket cover
from the bracket.
Use a flat-head
screwdriver or your
hands and gently pry
open the bracket
cover from the
bracket.
Match the bracket
cover to the holes on
the wall and fasten
the screws.
1 2
34 5 6
Place the bracket
cover against the
wall where the
camera will be
mounted and mark
the position of the
screw holes.
Adjust the angle of
view.
(Do not use force to adjust.
Unscrew the lever and
adjust accordingly after
checking the position of
the groove, then re-tighten
the lever. )
Drill a hole on the marked location. Insert an anchor for each of the two holes. Fully
insert the anchors by gently tapping the anchor head with a hammer or rubber mallet.
Attach the camera bracket to the bracket cover.
※Before installing the camera, determine the best location and angle for the camera,
and then install it.
ab

6
Caution
1. Recommended micro SD card
- It is recommended to use a MLC for higher data density and reliability of recording.
2. We recommend that you use the provided batteries, or well-known brand batteries such
as Panasonic, Energizer, or Duracell.
Use of counterfeit or low-quality batteries increases the risk of camera malfunction and
the possibility of re.
3. We do not recommend using rechargeable batteries for the Outdoor, Battery-Powered
Camera. It increases the risk of camera malfunction and the possibility of re.
4. Station Camera is not weatherproof.
For indoor use only.

MEMO MEMO