Samsung WISENET SNH-V6410PN User manual

Quick Start Guide
WISENET
SMARTCAM

2
What’s in the box
Camera
a
Bracket /
b
Camera Mounting Screw
Template
Power adapter and cable
a
Screws /
b
Plastic anchors
Warranty Card / Quick Start
Guide
a
b
※Please do not lose the camera mounting screw when you open the package contents. The camera
mounting screw is needed when you mount the camera onto the bracket.
a
b

3
System Requirements
. Windows 7/8 or higher
. Mac 10.7 or higher
. iOS 8 or higher
. Android OS 5.0 or higher
. Wi-Fi 802.11 b/g/n
. Recommended : 3.5Mbps
or higher

4
Mobile Application
<iOS>
<Android>

Download the free Wisenet SmartCam app
now available on Google Play and the App
Store.

5
Camera Overview
54
Power
microSD Slot
Microphone
Reset button
5
4
3
IR LEDs
LED Status
Indicator
Speaker
1
2
3
2
1
6
6
Wi-Fi Direct button
7
78
8

6
Camera setup and registration
12
3
User ID : ___________________
User Password : _____________
Camera Name : ______________
Camera Password : ___________
Plug-in the power adapter
to the wall and connect the
camera as shown.
Open the WiseNet
SmartCam app and create
an account. Follow the
on-screen instructions to
register.
Save your Account and
Device information here.

7
Mounting the Camera
1
3
2
4a b
Insert the camera
mounting screw into the
bracket hole at the
bottom of the bracket and
turn it clockwise to
assemble it.
aInsert the anchors
completely into the holes.
bDrill the screws into the
anchor holes. Leave 3mm
of space between the wall
and the screw heads.
Attach the template to the
wall.
Drill the holes about 1.2
inches deep into the wall.
(Recommended Drill Bit
size 0.2 inches)

8
Mounting the Camera
5
7
6
8
a
b
<Upside down
Installation> Hang the
bracket using the screws
and lower it to the
direction in which you
intend to install.
aMount the camera onto
the bracket.
bTighten the camera
mounting screw to secure
the camera.
<Upright Installation>
Hang the bracket using the
screws and lower it to the
direction in which you
intend to install.
Tighten the screws until
the bracket is firmly held in
place.

9
LED Status Guide
Booting up
Booting completed
Enabling Wi-Fi Direct
Searching for available
Wi-Fi network
Connecting to a Wi-Fi
network
Connected to Wi-Fi Network/
Normal Operation
Updating firmware