Samsung Crystal Surround Air Track HW-F550 User manual

at Aros
SoundShare
SoundShareproduces TV sound on your SAT viaa Bluetooth connection and controls the sound
HDMI
HDMI transmits video and audio signals simultaneously, and provides a clearer picture.
The unit is also equipped with the ARC function which lets you listento sound from your TV via an HDMI cable through the Crystal
Surround Air Track. This function is only available if you connect the unit to anARC compliant
3D Sound Plus
The 3D SOUND PLUS feature adds depth and spaciousness to your listening experience.
Wireless Subwoofer
Samsung's wireless module does away with cables running between the main unit andthe subwoofer.
Instead, the subwoofer connects to a compact wireless module that communicates with the main unit.
Special Sound mode
You can select from 7 different sound modes - MUSIC, NEWS, DRAMA, CINEMA, SPORTS, GAME, and OFF (Original Sound) -
depending on the type of content you want to enjoy.
Multi-function Remote Control
The supplied remote control can be used to control the TV connected to this unit. (Works only for Samsung TVs)
The remote control has aTV hotkey that enables you to perform various operations with the simple press of a button.
Active Speaker System
This unit features an Active Speaker System that provides high sound quality in a single slim unit.
This unit does not requireany satelliteloudspeakers or speaker cabling, which are normally associated with conventional surround
sound systems.
USB Host support
You can connect and play music files from external USB storage devices such as MP3 players,
USB flash memory, etc. using the Air Track's USB HOST function.
Bluetooth Function
You can use connect a Bluetooth device to the SAT and enjoy music with high quality stereo sound, allwithout wires!
LICENSE
[']rl DOLBY
......................u_Gii_L]
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
@dt_
20 Cha_el
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents
issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc. Product includes software. @ DTS, Inc. All Rights Reserved.
_,11_11,,_11 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC inthe United States and other countries.
- To send inquiriesand requests regarding open sources, contact Samsung via Email([email protected]).

SAFETY WARNINGS
TO REDUCETHE RISKOF ELECTRICSHOCK,DO NOT REMOVETHECOVER(ORBACK).NO USER-SERVICEABLEPARTSARE INSIDE. REFER
SERVICINGTO QUALIFIEDSERVICEPERSONNEL.
I The lighting flash and Arrowhead within the
triangle are warning signs alerting you to
dangerous voltage Inside the product
RISKOFELECTRICSHOOK
DONOTOPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVETHE
COVER (OR BACK). NO USER SERVICEABLE
PARTS iNSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within the triangle is a
warning sign alerting you to impertant
instructions accompanyir_g the product.
WARNING
Toreduce the risk of fire or electric shock, do not expose this appliance to rainor moisture.
Toprevent iniu% this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
CAUTION
Do not expose this apparatus to dripping or splashing. Do not put obiects filled with liquids, such as vases on the apparatus.
Toturn this apparatus offcompletely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily
accessible at alltimes.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. Toprevent
electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful intederence to radio communications. However, there is no guarantee that intederence will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
increase the separation between the equipment and receiver.
Connect the equipment to an outlet that is on a different circuit than the radio or T_
Consult the dealer or an experienced radio/TV technician for help.
Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may void the user's authority to operate it.
Important Safety Instructions
Read these operating instructions carefullybefore usingthe unit. Follow allthe safety instructions listed below, Keep these operating instructions handy for
future reterence.
1) Read these instructions. 10)
2) Keep these Instructions.
3) Heed allwarnings.
4) Follow all instructions. 11)
5) Do not use this apparatus near water.
6) Clean only with dry cloth. 12)
7) Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8) Do not install Iqearany heatsources such as 13)
radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safeS/purpose of the polarized or grounding-type 14)
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. Ifthe
provided plug does not tit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachment/accessories specified by
the manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as when the power-supply cord or plug is damaged, liquid has
been spilled or obiects have fallen intothe apparatus, the
apparatus has been exposed to rainor moisture, does not operate
normally, or has been dropped.

PRECAUTIONS
3.9_nch 3.9hlch
Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the
back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4
inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot.
This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend
to leave it unused for a long period of time.
During thunderstorms, disconnect the AC plug from the
wall outlet. Voltage peaks due to lightning could damage the unit. Do not expose the unit to direct sunlight or other heat sources. Ttqiscould lead to overtqeatingand cause the unit to malfunction.
Protect the product from moisture (i.e.vases),and excess heat (e.g.
a fireplace) or equipment creating strong magnetic or electric fields
Disconnect the power cable from the AC supply ifthe unit malfunctions.
Your product is not intended for industrial use. This product is for pep
sonal use only.
Condensation may occur if your product has been stored in cold tem-
peratures. Iftransporting the unit during the winter, wait approximately2
hoursuntil the unit has reached room temperature beforeusing.
Ttqebatteries used with this product contain chemicals that are harmful to
the environment.
Do not dispose of batteries in the general housetqoldtrastq.

FEATURES
SAFETY INFORMATION
GETTING STARTED
ii
DESCRIPTIONS
¸¸¸¸2
REMOTE CONTROL
2 Features
2 License
3 Safety warnings
4 Precautions
6 Before reading the User's Manual
6 What's included
7 Front Panel
8 Rear Panel
9 Tour of the Remote Control
CONNECTIONS
FUNCTIONS
TROUBLESHOOTING
10 Installing the Wall Mount
11 Connecting the Wireless Subwoofer
12 Attaching the Toroidal Ferrite Core to the
Power Cord of the Subwoofer
12 Looping the power cable around the
Toroidal Core
13 Connecting an external device using HDMI
cable
14 Connecting an external device using Audio
(Analog) cable or Optical (Digital) cable
15 Input Mode
15 Bluetooth
17 SoundShare
18 USB
19 Using the Remote Control
22 Software Upgrade
23 Troubleshooting
APPENDIX 24 Specifications
5

aett na
BEFORE READING THE USER'S MANUAL
Note the following terms before readingthe user manual,
Icons used in this manual
Indicates a situation where afunction does not operate or settings may be
canceled.
Indicates tips or instructions on the page that help you operate a function.
Safety Instructions and Troubleshooting
1) Be sure to familiarizeyourself with the Safety Instructions before using this product. (See page 3)
2) Ifa problem occurs, check Troubleshooting. (Seepage 23)
Copyright
o2013 Samsung Electronics Co.,Ltd.
All rights reserved;no part or whole of this user's manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.,Ltd.
WHAT'S INCLUDED
Check for the supplied accessories shown below,
: @ (Holdei:sCiewi2EA)
(Screw:2EA)
The appearance of the accessories may differ slightly from the illustrations above.
Use the dedicated USB cable to connect external USB devices to the unit.

de3Grpton3
FRONT PANEL
POWER BUTTON Turns the Crystal Surround Air Track on and off.
FUNCTION
BUTTON
Selects the D.IN, AUX, HDMI, BT, TV,USB input.
- While the unit is powered, pressing the (Fo)button for more than
3 seconds sets the button to act as MUTE button.
Tocancel MUTE button setup, press (Fo)button for more than 3
seconds again.
Controls the volume level.
3_ VOLUME +!- The numericvalue of the volume levelappears in the front panel display.
REMOTE CONTROL The remote control can operate Air Tracks made by SAMSUNG
SENSOR only.
_5 DISPLAY
Displays the current mode.
- If there is no input from the product or remote control for 15
seconds, the display will turn off automatically.
- The display will not turn off automatically in BT READY,TV
READY and USB Playing modes.
When you turn on of this unit, there will be a 4 to 5 second delay before it produces sound.
Ifyou want to enjoy the sound only from the Crystal Surround Air Track, you must turn off
the TV's speakers in the Audio Setup menu of your TV.Refer to the owner's manual
supplied with your TV.

REAR PANEL
®
®
_ J
8
1 POWER SUPPLY Connect the AC power adaptor jack to the power supply jack
properly, and then connect the AC power adaptor plug to the wall
IN outlet.
Connect USB devices such as MP3 players here to the play files
on the devices.
USB PORT - Use the supplied USB converter if you have installed the product
on a wall.
3- AUX IN Connect to the Analog output of an external device.
Receives digitalvideo and audio signals simultaneouslyfrom an
HDMI IN JACK
.._"T externalsource using an HDMIcable.
_5 OPTICAL IN Connect to the digital (optical) output of an external device.
HDMI OUT JACK Outputs digital video and audio signals simultaneously using an
HDMI cable.
W When disconnecting the power cable of the AC power adaptor from the wall outlet, pull
the plug. Do not pull the cable.
Do not connect this unit or other components to an AC outlet until all connections
between components are complete.

TOUR OF THE REMOTE CONTROL
POWER BUTTON
furns the Crystal Surround Air T?ack
on and off.
SOURCE
Press to select a connected SAT
source, (SAT:Surround Air fYack)
AUTO POWER
Synchronizes the Air Track to a
connected Opfical source via the
Opfical jack so it turns on automatically
when you turn on your T_
REPEAT
Select Repeat File, All, Random,
TV VOLUME
Adjusts the TV volume level,
TV MUTE
Mutes the sound from the TM Press
again to restore the sound to the
previous volume level.
TV INFO, TV PRE-CH
Display current TV status,
Moves to the previous TV channel.
CONTROL BUTTON
Play, pause, or stop playing
a music file, or search forwards or
backwards for a music file.
SOUND EFFECT
Selects the Sound Effect:
(MUSIC, NEWS, DRAMA, CINEMA,
SPORTS, GAME, OFF (Original Sound))
3D SOUND PLUS
This feature adds depth and
spaciousness to the sound,
:$oundShare :
TV POWER BUTTON
Turns your Samsung TV on and off.
SPEAKER
This button allows you to choose to
listen to audio from the Air track or your
TV,
TV SOURCE
Press to select a connected TV's video
soume.
Anynet+, SoundShare
Anynet+ is a function that enables you
to control other Samsung Devices
with your Samsung TV's remote
control,
This produces TV sound on your SAT
via a Bluetooth corlnecfion and
controls the sound,
TV CHANNEL, AUDIO SYNC
Switches between the available T_/
channels,
Used to help sync video to audio
when connected to a digital TM
TV EXIT
Exits l_/(functions same as the
EXIT button of the TV remote,
SMART VOLUME
Regulates and stabilizes the volume
level against a drastic volume change,
VOLUME, S/W LEVEL
Adjusts the volume level of the unit.
Adjusts the Subwoofer level,
DRC
You carl use this function to enjoy
Dolby Digital sound when watching
movies at low volume at night
(Standard, MAX, MIN),
MUTE
Mutes the sound from the unit, Press
again to restore the sound to the
previous volume level,
SAT stands for Surround Air Ti'ack, which is a Samsung's proprietary name,
The remote control carl operate TVs made by SAMSUNG only,
Depending on the TVyou are using, you may not be able to operate your TV with this remote control, If you can't,
operate the TMusing the TV's remote control,
installing batteries in the Remote Control
1. Lift the cover at lhe back 0f 2. insta!l two AAA Size batteries, 3, Replace the Cover.
the remote control upward as Make sure to match the %1! and ,-, ends Assuming typical _ usage,
shown, of the batteries with the diagram inside the the batteries last for about
CompartmenL one year.
Operational Range of the Remote Control
Youcanusethe remotecontrolup to 23 feet(7 meters)ina straightlinefromthe unit.Youcanalsooperatethe
remoteata horizontalangleofup to 30° fromtheremotecontrolsensor. 9

oonnooton
INSTALLING THE WALL MOUNT
You can use the wall mount bracket to mount this unit on awall.
Installation Precautions
• Install on a vertical wall only.
For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the
weight of the set.
Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or
install the unit on different wall that can support the unit's weight.
Purchase and use the fixing screws or mollys appropriate for the kind of wall you have (plaster board, iron
board, wood, etc.). Ifpossible, fix the support screws into wall studs.
Connect cables from the unit to external devices before you install it on the wall.
• Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electdc shock.
1= Place the wall mount bracket on a wall surface and then
secure it with two screws.
Ifyou are hanging the unit below aT_,be sure to install the
wall mount bracket so that the arrow (t) is placed in the
center of the TV.
Also make sure the unit is at least two inches (5 cm)
below the TV.
2=
3=
Align the two HOLDER-SCREWs with the screw holes
on the left and right sides of the MAIN UNIT, and then fix
them to the main unit with the supplied screws.
Insert the USB converter into the unit before installing it
on the wall.
4= Fit the unit into the corresponding slots of the wall mount
bracket. For secure installation, make sure the mounting
studs slide firmly down into the bottom of the slots.
5. The installation is complete.
2 inches (5 cm) or more :_
10
Do not hang onto the installed unit and avoid any impact to the unit.
Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an
injury or damage the product.
When the unit is installed on a wall, please make sure that children do not pull any of the
connecting cables, as it may cause it to fall.
For the optimal performance of a wall mount installation, install the speaker system at least 2
inches (5 cm) below the TV.

CONNECTING THE WIRELESS SUBWOOFER
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect
wirelessly) automatically when the main unit is turned on. Ifthe LINK indicator does not light when the main
unit and subwoofer are turned on, please set the ID by following the procedure below.
1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.
2. Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds.
The STANDBY indicator is turned off and the LINK indicator (Blue LED)blinks quickly.
ID SET
3.
4.
5.
While the main unit is powered off (STANDBYmode),
press MUTE on the remote control for 5 seconds.
The ID SET message appears on the main unit's OLED display.
To finalize the link, turn the main unit's power on while the
subwoofer's LINK LED blinks.
,, The main unit and the subwoefer are now linked (connected).
The LINK indicator (blue LED)on the subweofer is turned on.
,, You can enjoy better sound from the wirelesssubwoofer by selecting the sound effect. (Seepage 20)
,_ Before moving or installing the product, be sure to turn off the power and disconnect the power
cord.
,_ Ifthe main unit is powered off, the wireless subwoofer will be in the standby mode and the
STANDBY LEDon the upper side will come on after the LINKindicator (BlueLED)blinks for 30
seconds.
,_ Ifyou use adevice that uses the same frequency (2.4GHz)near the system, interference may
cause some sound interruptbn.
,_ The transmission distance of the wireless signal between the main unit and sub isabout 33 ft.,
but may vary depending on your operating environment. If asteel-concrete or metallic wall is
between the main unit and the wireless subwoefer, the system may not operate at all, because
the wireless signal cannot penetrate metal.
,_ Ifthe main unit doesn't make a wireless connection, follow steps 1-5 above to retrythe
connection between the main unit and wireless subwoefer.
The wireless receiving antenna is built into the wireless subwoefer. Keep the unit away from
water and moisture.
For optimal listening performance, make sure that the area around the wireless subwoofer
location is clear of any obstructions.
11

oonnootons
ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER CORD
OF THE SUBWOOFER
Attaching the Toroidal fernte core to the power cord of the subwoofer
helps prevent RFinterference from radio signals.
1, Pull the fixing tab of the Toroidalfernte core to open it.
2, Make two loops around the core with the power cable of the
subwoofer.
3, AttachtheToroidalferritecoreto theSubwooferpowercordasthefigure
showsand pressit untilit clicks.
LOOPING THE POWER CABLE AROUND THE TOROIDAL CORE
Lift up to release the lock and open the core,
Close the lock, Make two loops around the core with the power cable,
(Startwinding 5-100m (12,75 - 25,5 in,)
away from the core),
12

CONNECTING AN EXTERNAL DEVICE USING HDMi CABLE
HDMI is the standard digital interface for connecting to such devices as a TVs, projectors, DVD players,
Blu-ray players, set top boxes, and more.
HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality
as it was originally created in the digital source.
I
HDMI IN
HDMI Cable !
Digital Devices
I
HDMI OUT
I HDMI Cable
HDMI IN
HDMI IN
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT
jack on your digital devices.
and,
HDMI OUT (HDMI}
• Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMIINjack on your TV.
HDMI is an interface that enables the digital transmission of video and audio data with just
a single connector.
HDMI OUT (ARC)
• The ARC function allows digital audio to output via the HDMI OUT (ARC)port.
Itcan be enabled only when the Air Track isconnected to a TV that supports the ARC function.
• Anynet+ must be turned on.
This function is not available if the HDMI cable does not support ARC.
13

OONNOOtON
CONNECTING AN EXTERNAL DEVICE USING AUDIO (ANALOG)
CABLE OR OPTICAL (DiGiTAL) CABLE
This unit comes equipped with one optical in digital jack and one audio analog in jack, giving you two ways to
connect it to a TV.
AUXIN
Audio Cable
_AUDIO --
OUT
0
or
= OPTICAL iN
Optical Cable
(not supplied)
BD/DVD player/
Set-top box/
Game console
-OPTICAL =
OUT
0
AUX IN
Connect AUX IN (Audio) on the main unit to the AUDIO OUT of the TV or Source Device.
Be sure to match connector colors.
or,
OPTICAL IN
Connect the Digital Input on the main unit to the OPTICAL OUT of the TV or Source Device.
Do not connect the power cord of this product or your TV to the wall outlet until all
connections between components are complete.
,_ Beforemoving or installingthis product, be sure to turn off the power and disconnect the power
cord.
14

f AnGton3
INPUT MODE
You can select D.IN, AUX, HDMI, BT,TV input or USB input.
Pressan appropriate button on the remote control to select a desired mode, or press (F.) to select one from:
D.IN,AUX, HDMI, BT,TV or USB mode.
Input mode I Display
Optical Digital input D.IN
AUXinput AUX
HDMI input HDMI
BLUETOOTHmode BT
TV mode TV
USBmode USB
The unit turns off automatically in the following situations:
*BT/TV/USB/HDMI/ARC/D.IN MODE
- If there is no audio signal for 20 minutes.
*AUX Mode
- If no KEY input is entered for 8 hours when the cable is connected.
- If the AUX cable is disconnected for 20 minutes.
The ARC function is activated in D.IN mode if the unit is connected to an ARC supporting TV.
Toturn off the ARC function, turn Anynet off.
Use the provided cable if a USB flash memory device cannot be connected directly to the unit.
BLUETOOTH
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
What is B[uetooth?
Bluetooth isa technology that enables Bluetooth-compliant devices to interconnect easilywith each other using
a short wireless connection.
A Bluetooth device may cause noise or malfunction, depending on usage, when:
A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Air
Track.
Itis subject to electrical variationfrom obstructions caused by a wall, corner, or office partition.
Itis exposed to electricalinterference from same frequency-band devices including medical equipment,
microwave ovens, and wireless LANs.
Pair the Air Track with the Bluetooth device while they areclose together.
Thefurther the distance isbetween Air Track and Bluetooth device, the worse the quality is.
Ifthe distance exceeds the Bluetooth operational range, the connection is lost.
In poor reception-sensitivity areas, the Bluetooth connection may not work properly.
The Bluetooth connection only works when it is close to the set. The connection will be automatically cut off if
the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles
such as walls or doors.
This wireless device may cause electric interferenceduring its operation. 15

To connect the Air Track to a Bluetooth device
Check ifthe Bluetooth device supports the Bluetooth compliant stereo headsetfunction.
@
®
@ Connect
@
Bluetooth device
1. Press the SOURCE button on the remote control of the AirTrack to display the BT message.
• You will see WAIT for 4 seconds and then BT READY on the front display of the Air Track.
2.Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth
device's user manual.)
3.Select the Stereo headset menu on the Bluetooth device.
,, You will see a listof scanned devices.
4. Select "[Samsung] AirTrack" from the list.
• When the Air Track is connected to the Bluetooth device, it will display BT CONNECTED ,_ BT on the front
display.
• If the Bluetooth device has failed to pair with the AirTrack, delete the previous "[Samsung] AirTrack"found
by the Bluetooth device and haveit search for theAir Trackagain.
5. Playmusic on the connected device.
• You can listen to the music playing on the connected Bluetooth device over the CrystalSurround Air Track
system.
• In BT mode, Play/Repeat/Stop/Next/Prev functions arenot available.
You may be required to enter a PIN code (password) when connecting the Bluetooth device to
the Air Track. Ifthe PIN code input window appears, enter <0000>.
The Air Track supports SBC data (44.1kHz, 48kHz).
The AVRCP feature is not supported.
Connect only to a Bluetooth device that supports the A2DP (AV)function.
You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function.
Only one Bluetooth device can be paired at a time.
Once you have turned off Air Track and the pairing is disconnected, the pairing will not be
restored automatically. To reconnect, you must pair the device again.
Search or connection may not be performed properly by Air Track in the following cases:
Ifthere isa strong electrical field around Air Track.
Ifseveral Bluetooth devices are simultaneously paired with AirTrack
Ifthe Bluetooth device is turned off, not in place, or malfunctions
Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas
stoves use the same frequency range as the Bluetooth device, which can cause electric
interference.
16

To disconnect the Bluetooth device from the Air Track
You can disconnect the Bluetooth device from the AirTrack.
For instructions, see the Bluetooth device's user manual.
TheAir Track will be disconnected.
When the Air Track is disconnected from the Bluetooth device the Air Trackwill display BT DISCONNECTED
on the front display.
To disconnect the Air Track from the Bluetooth device
Pressthe (F.)button on the front panelof the Air Track to switch from BT to another mode or turn off the Air
Track.
,, The connected Bluetooth device will wait a certain amount of time for a response from the Air Track before
terminating the connection.
(Disconnection time may differ, depending on the Bluetooth device)
The currentlyconnected device will be disconnected.
,_ InBluetooth connection mode, the Bluetooth connection will be lost ifthe distance between the Air
Track and the Bluetooth device exceeds 16.25 ft. (Sm).
,_ Ifthe Bluetooth device comes back into the effective range after disconnecting, you can restartthe Air
Track to restore the pairing with the Bluetooth device.
,_The Air Trackautomatically turns off after 20 minutes in the Ready state.
SOUNDSHARE
This section explains how to connect the Crystal Surround Air Track to a Bluetooth compatible SAMSUNG TV.
To connect the Crystal Surround Air Track to a Bluetooth compatible
Samsung TV
@Connect
@
8)
Pressthe (F.) button to select the "IVmode, and then connect the TV to the CrystalSurround Air Track.
The unit will play the TV's audio when it is connected to the TV.
If you change to another mode, except the TV SoundShare mode, or turn off the Air Track, you will hearaudio
from the TV again.
<To pair to your TV>
To produce TV sound on your Air Track via a Bluetooth connection, you need to pairyour system to the
Bluetooth compliant TV first. Once the pairing isestablished, the pairing information is recorded and kept and no
further Bluetooth connection message will appear. Bring the Air Track and the TV close together before pairing.
17

1. Turn on the Samsung TV and Air Track.
• Set Add New Device in the TV's SoundShare Setting menu to On.
2. When you change the mode of the Air Track to TV, a message asking whether to proceed with
Bluetooth pairing is displayed. "[Samsung] AirTrack" appears on the TV screen.
3oSelect <Yes> on the TV screen. The pairing with the Air Track will be completed.
• Once the pairing is established, when you change the Air Track to the TV mode from other input modes, it will
automatically connect to the TV.
• Changing the Air Track from TV mode to any other mode will cancel the SoundShare connection.
• Ifyou want to cancel the existing pairing of the SAT to a TV and pair your SAT to a different T_.
- Press the PLAY/PAUSE button on the SATfor 5 seconds inthe TV input mode to cancel the existing pairing.
You can now pair it to a different T_.
• Inthe SoundShare mode, you can control the volume and mute using either the TV remote or the SAT remote.
TV SoundShare operation range
recommended pairing range: within 20 inches (within 50cm)
recommended operation range: within 16.25 ft. (Sm)
If the distance between the Air Track and Samsung TV is over 16.25 ft. (Sm), the connection or the
sound can be cut off. Ifthis occurs, connect to the Bluetooth device again within the operational range.
Make sure the Samsung TV's SoundShare mode is on before you use this function.
The PLAY, NEXT, PREV, STOP buttons will not work in the SoundShare mode.
Bluetooth Standby On function
- Air Track will be powered on automatically when you turn the TV on ifyou connected TV and Air Track with
SoundShare function.
- You can toggle this fucntion On/Off by pressing SOURCE button over 5 seconds when AirTrack is
powered off. Ifset to Off, the product turns off automatically when the TV turns off, but it does not turn on
automatically.
The SoundShare function is supported by some Samsung TVs released after 2012.
Check whether your TV supports SoundShare before you begin.
(For more information, refer to the user's guide of your TV)
USB
1.Connect the USB device to the USB port on the side of the unit.
2. Pressthe (F.) button on the front panelof the AirTrack repeatedly until USB appears.
3.USB appears on the display screen and then disappears.
The Crystal Surround Air Trackconnection iscomplete.
The SATautomaticallyturns off (Auto Power Off)if no USBdevice has beenconnected for more than 20 minutes.
Before you connect a USB device
Be aware of the following:
Ifthe file name of a folder on a USB device exceeds 10
characters, it is not displayed on the OLED.
This product may not be compatible with certain types of USB
storage media.
The Air Track supports the FAT16 and FAT32 file systems.
- The NTFSfile system is not supported.
F J _ ]
18

*Connect USB devices directly to the USB port of the product. Otherwise, you may encounter a USB
compatibility problem.
*Do not connect multiple storage devices to the product via a multi-card reader. It may not operate
properly.
*Digital camera PTP protocols are not supported.
*Do not remove the USB device while it is being read.
*DRM-protected music files (MP3, WMA) from a commercial web site will not be played.
*External HDDs are not supported.
*Mobile phone devices are not supported.
*File Format Type Compatibility list:
Format
".mp3
%wma
*,aac
*,WaV
%Ogg
_.Flac
Codec
MPEG1 Layer2
MPEG1 Layer3
MPEG2 Layer3
Wave Format...MSAudiol
Wave Format MSAudio2
AAC
AAO-LO
HE-AAC
OGG 1,1,0
FLAC 1,1,0, FLAC1,2,1
._ Supporting Sampling Rate above 16KHz
USING THE REMOTE CONTROL
I ....
Play/Pause/Stop
During playback, press the _ll,m button.
Pressthe _ || button again to stop playing the file temporarily.
Pressthe _.II button to playthe selected file.
Tostop playback, pressthe Stop (m)button during playback.
Skip Forward/Back
During playback, press the I_,_-I button.
,, When there is more than one fileand you press the _,_1button, the next file
isselected.
,, When there is more than one file andyou press the I._ button, the
previous file is selected.
Using the REPEAT function
Repeatplayback allows you to repeatedly play a file, repeatall, randomly play
files,or turn Repeatoff.
Pressthe REPEAT button.
,, REPEAT OFF : Cancels Repeat Playback.
*REPEAT FILE : Repeat playing a track.
*REPEAT ALL : Repeat playing all tracks.
*REPEAT RANDOM : Plays tracks in random order. (A track that has
already been played may be played again.)
,_You can set the REPEATfunction during the playback of music from
a USB drive.
19

Muting the sound
This is useful when answering adoorbell or telephone call.
1.Tomute the sound of this unit, pressthe MUTE button on the remote
control.
2.To mute the TV,press the TV MUTE (_) button on the remote
control.
3. PressMUTE /TV MUTE (_ )on the remote control again (orpress
VOLUME +/-) to restore the sound.
Using the 3D SOUND PLUS function
The 3D Sound Plusfeature adds depth and spaciousness to the sound.
Press3D SOUND PLUS on the remote control.
Each time the button is pressed, the selection changes as follows :
3D SOUND PLUS OFF _ 3D SOUND PLUS MUSIC _ 3D SOUND
PLUS MOVIE
ii! _i .......
SOUNDEFFECT _;/,I/_, _ _O _)¢!i
,_When you turn on 3D Sound Plus, the Sound Effectfunction will
automatically change to OFE
Using the SMART VOLUME function
This will regulateand stabilizethe volume level against a drastic volume
change caused bya channel change or scene transition.
PressSMART VOLUME on the remote control.
Each time the button is pressed, the selection changes as follows :
SMART VOLUME ON _ SMART VOLUME OFF
Using the Sound effect function
You can select from 7 different sound modes - MUSIC, NEWS, DRAMA,
CINEMA, SPORTS, GAME, and OFF (OriginalSound) - depending on the
type of sources you want to enjoy.
PressSOUND EFFECT on the remote control.
Select the OFF mode ifyou want to enjoy the originalsound.
,_We recommend thatyou select a Sound Effect based on the
source material and your personal taste.
,_When you choose a Sound Effect mode (except OFF),3D Sound
Pluswill automatically be turned OFE
Using the S/W LEVEL function
You can control the base volume with the S/W Level button on the remote
control.
1. Press the S/W LEVEL button on the remote control.
2."SW O" appears on the display.
3. Press< or > button on the LEVEL key if you want to increase or decrease
the subwoofer volume. You can set it from SW -6 to SW +6.
2O