19
English
¦Menu Items
To Enter this menu: Press the MUTE →1→1→9→ENTER
E
buttons in order.
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Menu Item initial Value Description
Hospitality
Mode Hospitality Mode Standalone
Select the Hospitality mode.
yStandalone mode: TV works alone, without an SI STB or SBB
yInteractive mode: TV works with an SI STB or SBB
SI Vendor SI Vendor OFF
yInteractive mode : Samsung / OCC / MTI / Nstreams / NXTV / Enseo /
Cardinal / Guestek / Seachange / EBL
yStand-alone mode : OFF / Smoovie
Power On
Power On Channel Last Saved
Set the default values that will be applied when the TV is turned on.
yUser Defined : Lets you set Power On Channel and Channel Type
manually. See Power On Channel and Channel Type below.
yLast Saved : If you select this item, when the TV is turned on, it displays
the channel it was displaying when it was turned off.
Power On Channel
Num … When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type …ySelect channel band : AIR (analog air band), DTV (digital air band), CATV
(analog cable band), CDTV (digital cable band)
Power On Volume Last Saved
yUser Defined : Lets you set the Power On Volume manually. See Power
On Volume below.
yLast Saved : When the TV is turned on, it returns to the volume that had
been set when the power had been turned off.
Power On Volume
Num … The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume 0 The minimum Volume Level the user can set in Stand Alone Hospitality
mode.
Max Volume 100 The maximum Volume Level the user in Stand Alone Hospitality mode.
Power On Source TV Select the input source the TV displays when turns on.
Power On Option Last Option
Determines the TV's state when power returns after a power failure or after
you have unplugged the TV and then plugged it in again.
yLAST OPT : Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
yPower On : When the power returns, the TV turns on.
yStandby : When the power returns, the TV enters the Standby mode.
Channel
Channel Setup Gives you direct, immediate access to some of the Channel menu functions
on the user Channel menu such as Auto Program, Antenna selection, etc.
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory.
Using Channel Editor you can:
•Changethechannelnumbersandnames,andsortthechannelsinyour
desired channel number order.
•Applythevideomutetochannelsyouselect.Thevideomuteblanksout
the video from a channel and outputs only the sound while displaying a
speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily,
without your having to display each channel directly.
Dynamic SI ON
yOn : Check the DTV Program channel number. (If Dynamic SI is On, it is
not availale to edit DTV channels in Channel Editor.)
yOff : Does not check the DTV Program channel number. (If Dynamic
SI is Off, it is available to edit DTV channels in Channel Editor, but
additional DTV channel program number update is not supported.)
[HC670_677_678-ZA]Install Guide-X0ENG.indd 19 2014-03-17 10:02:27