Samsung CW-21Z453NL EC Series User manual

FRORU#WHOHYLVLRQ#
Fkdvvlv = V49F+S,bQduqld
Prgho = FZ54]786QO[[HF#
FRORU#WHOHYLVLRQ# IHDWXUHV
■■Ultra Slim Fit CRT
■Multi Wide System
■
■LNA Plus(Low Noise Amplifier)
■Turbo Plus
■
■Low Stand-By Power Wattage
■
■SOUND Equalizer
VHUYLFH Pdqxdo
CW-21Z453N

This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
©Samsung Electronics Co., Ltd. Oct. 2006
Printed in Korea
AA82-04216A

Table of Contents
Chapter 1 Precaution
■1-1 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
■1-2 Servicing Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
■1-3 Static Electricity Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
■1-4 Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Chapter 2 Product Specification
■2-1 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
■2-2 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
■2-3 Specifications Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
■2-4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Chapter 3 Alignment & Adjustment
■3-1 Service Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
■3-2 How to Access Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
■3-3 Factory Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
■3-4 Service Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
■3-5 Software Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
■3-6 Replacements & Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
Chapter 4 Exploded View & Part List
■4-1 CW21Z453NLXXEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Chapter 5 Electrical Part List
■5-1 CW21Z453NLXXEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Chapter 6 Troubleshooting
■6-1 Checkpoints by Error Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
■6-2 Trouble-shooting with New Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
■6-3 Troubleshooting Procedures by Error Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
Chapter 7 Block Diagram
■7-1 Overall Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
■7-2 Partial Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

Chapter 8 Wiring Diagram
■8-1 Overall Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
■8-2 Pin Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
Chapter 9 PCB Diagram
■9-1 Main Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
■9-2 CRT Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
Chapter 10 Schematic Diagram
■10-1 POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
■10-2 MAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
■10-3 CRT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
■10-4 SOUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4
Chapter 11 Operation Instruction & Installation
■11-1 Product Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
Chapter 12 Disassembly & Reassembly
■12-1 Overhaul Disassembly & Reassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
Chapter 13 Circuit Description
■13-1 Circuit Key Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
Chapter 14 Reference Information
■14-1 Other issues related to other products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1
■14-2 Technical Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-3

Product Specification
Samsung Electronics 2-1
2. Product Specification
2-1 Product Features
Block Specfication Core Parts Remark
CRT 21" Ultra Slim Fit CRT Ultra Slim Fit CRT
RF Part LNA F/S TUNER TDQ-6L/125S, LNA
Power WORLD WIDE INPUT VOLTAGE RANGE STR-W6750F
Video - MULTI SYSTEM(NT/PAL/SECAM)
- 4H Comb Filter TDA12025PQ/N1F80
Audio
- Output : 10W X2
- Function : NICAM/A2 STEREO,
PSEUDO STEREO,
TURBO PLUS
TDA12025PQ/N1F80
TDA7297SA
Cabinet 21" CABINET
Other
- BASIC MODEL : CS-21Z45ZQ
- UOC3 with a built-in MSP
- TURBO→TURBO PLUS
■Core Parts Functions
- TDA12025PQ : Video/Sound Processing1x MICOM
- STR-W6750F : SMPS Power STR
- TDA7297SA : 5W ~ 15W Sound Output BTL AMP
- 24C16 : 16K EEPROM
- LA7845 : Vertical Deflection AMP
- C5936 : H-OUT S/W TR
- TDQ-6L : F/S PAL Tuner(LNA Option)
- TDA6107JF : R/G/B Drive AMP IC
- Flyback Trans : BSC29-0156G(11P,27KV)

Product Specification
2-2 Samsung Electronics
2-2 Key Features
Country EU CIS ASIA
COLOR
demodulation
PAL-BG / DK/ I
NT4.43, SECAM-L / L'
PAL-BG / DK / I
NTSC-M (CS SYSTEM)
PAL-BG / DK / I
NTSC-M (CS SYSTEM)
Sound receving way QSS (Quasi Split) QSS (Quasi Split) QSS (Quasi Split)
Sound demodulation INTER CARRIER (Virtual Dolby / Nicam / A2 Stereo)
Antemma 75ohm Din-Jack
Channel search F/S
Channel numbers AIR (100Ch)
Input voltage AC 220V ~ 240V AC 160V - 300V AC 220V ~ 240V
Power system STR-W6750F
Power insulation SMPS / COLD
receving(P/G) CH
VHF LOW : 2 ~ 4
VHF HIGH : 5 ~ 12
UHF : 21 ~ 69
CATV : S1 ~ 41,X,Y,Z,Z+1,Z+2
Character
TTX
Melody on/off
Turbo Sound
Auto Volume
Pre-Ch'
LNA+ (Option)
Led : Green
TTX, LNA+
Melody on/off
Turbo Sound
Auto Volume
Pre-Ch'
LNA+ (Option)
Led : Green
TTX
Melody on/off
Turbo Sound
Auto Volume
Pre-Ch'
LNA+ (Option)
Led : Green
■Feature
- AKB(Auto Kinetic Bais)
- Comb Filter : 4H Comb Filter
- Picture Size : 4:3
- NICAM / STEREO / Line-STEREO
- Auto STEREO, Sound Equalizer, Auto Mute, Auto Volume Limit, PSEUDO STEREO, TURBO PLUS
- Composite (RCA A/V,DVD)
- Rear : 42P Scart Input/Output (Scart1 R/G/B Input)
- Front or Side A/V Input (Side A/V Preferability), Headphone

Product Specification
Samsung Electronics 2-3
2-3 Specifications Analysis
Model CW21A113N CW-21Z453N
Chassis KS7A S16C
Design
Basic
Product Type FLAT CRT Ultra Slim Fit CRT
Digital Display - -
Screen Size 21 21
Aspect Ratio 4:3 4:3
System
Broadcasting System PAL/SECAM/NT PAL/SECAM/NT
Tuner Programmable F/S Programmable F/S
CH Memory 100CH 100CH
Power
Supply 230V 160~300V
Stand-by 3W 5W
Picture ON Master S/W Master S/W
Picture
4H Comb-Filter OO
SCAN 50HZ 50HZ
Sharpness O O
CTI O X
VM X X
AKB O O
P.STD O O
PIP X X
Digital NR O O
Color Tone(W/B) O O
Black Level Expantion O O
Screen Mode 5 Mode 5 Mode
Sound
SPK System A11 Semi Dome/Direct Semi Dome/Direct
Sound Output Power(Max) 5W + 5W 10W + 10W
MDB X X
Virtual Dolby X X
MSE X X
Melody O O
Turbo Sound OO
A2 Stereo A2 or Nicam A2 or Nicam
Auto Stereo O O
AVL O O
Equalizer O O
Jack
Front/Side AV Jack O O
PC Input(VGA) X X
Scart Jack 2Scart 2Scart
Back A/V Monitor Out O O
S-VHS Jack(Front only) O X
Head/Earphone Jack O O
Common Interface O O
Service Port X X
Accessory
I/B O O
Normal Remocon(TM76) O O
Battery O O
Matching Trans O X
Rod ANT O O

Product Specification
2-4 Samsung Electronics
2-4 Accessories
Accessories Item Item code Remark
Supplied Accessories
Remote Control
Batteries
AA59-00399A
4301-000121
Samsung Service centerOwner's Instructions AA68-03801A
Warranty Card
Safety Guide Manual
Registration Card
BN68-00514D
AA68-03242E
AA68-03575A
Accessories that can be purchased
additionally
RF Cable -
Internet shopping mall
HDMI/DVI Cable -
HDMI Cable -
Video Cable
Audio Cable -
S-VIDEO Cable -
Component Cable(RCA) -
Optical Cable -

Alignment & Adjustment
Samsung Electronics 3-1
3. Alignment & Adjustment
3-1 Service Instruction
1. General Adjustment :
In general, a color TV can provide ideal visual quality by adjusting the basic settings such as the vertical size, horizontal size,
focus, etc.
Display a black and white picture on the screen to check if the picture is clearly displayed.
If there are some 'spotted' points on the screen when displaying a black and white picture, degauss the screen using the
degauss coil. If the spotted points remain, re-adjust the purity and the convergence.
This completes the basic performance examination.
Notice.
■These adjustments and the check list are only applied to S16C chassis-applied models.
■Only use 230V for the measurement set. It is recommended using an insulation transformer when supplying power to
the set so as to prevent shock to the set or to yourself.
■These adjustment specifications have been created on the basis of the domestic S16C chassis-applied remote control
model. Some of the contents may be changed subject to the sales location and the product specifications.
※When replacing the Module Service Instruction
1. When replacing the MAIN Board : Tilt adjustment, Focus adjustment, Screen voltage, W/B adjustment are all required. Since
the settings including the Channel information,Deflection, etc. are saved to the EEPROM,
recogfigure these settings when replacing the MAIN Board.
The notation of the software information : T-NARPEU-1000 refer to "NARNIA BASIC MODEL EUROPE.VER.1000"
Since the settings including the Channel information, Deflection, etc. are
saved to the EEPROM, recogfigure these settings when replacing the MAIN Board.
2. When replacing the CRT Ass'y : No adjustments required
3. When replacing the front panel Master Power switch : No adjustments required
4. When replacing the Side AV Ass'y : No adjustments required
5. When replacing the PIP Module : No adjustments required
6. When replacing the Control Ass'y : No adjustments required
7. When replacing the PFC Ass'y : No adjustments required

1. To enter Service Mode, press the keys on the remote control according to the following sequence. (in Stand-by status)
Info →Menu →Mute →Power On
※When failing to enter Service Mode, repeat the procedure above.
2. The initial screen of Service Mode.
3. Functions of the Keys within Service Mode.
4. W/B Setting
Alignment & Adjustment
3-2 Samsung Electronics
3-2 How to Access Service Mode
MENU Show all menus
▲/ ▼Move the cursor to select an item.
◀/ ▶Adjust the selected configuration value
Option1 XX XX XX XX XX
Option2
Deflection
WSS Deflection
Video Adjust1
Video Adjust2
Video Adjust3
Video Adjust4
Video Adjust5
YC Delay
Others
Bus Stop Off
CHECKSUM 0000
G2 Adjust
RESET
T-NARPEU-1000 2006/XX/XX
No Item Data Required Adjustment
1White
Balance
x:286±3 y:290±3 Y:40±3
x:286±3 y:290±3 Y:2.0±.3 White Balance (Standard Data)
2Screen Voltage Toshiba Pattern
G2 Adjust Same as S16A Basic Model

Alignment & Adjustment
Samsung Electronics 3-3
3-3 Factory Data
CIS
21"/Ultra SLIM-CRT
Non-PIP/LNA
South East Asia
21"/Ultra SLIM-CRT
Non-PIP/Non-LNA
Middle East Asia
21"/SLIM-CRT
Non-PIP/Non-LNA
Remark
Option1
1.Video Mute 900msec 900msec 900msec
2.System CS CS CS
3.AV Jack 2SCART 2RCA+DVD 2RCA+DVD By MODEL /Africa:Some
Area is 2SCART
4.CRT 4:3 Zoom 4:3 Zoom 4:3 Zoom
5.Sound NICAM NICAM NICAM
6.Volume Curve Large Large Large
7.Initial Lang. Russia By Country By Country TSE,SDMA,SAVINA,SEIN
8.TTX Osd Language Osd Language Osd Language MQ:osd, MN/MA:OFF
9.TTX Flof/List Flof Flof Flof
10.Tilt Off Off Off
11.LNA On Off Off
12.DNIe JR Off On Off
13.Hotel Mode Off Off Off
14.PIP Off Off Off By MODEL
1. Option1
2. Option2
CIS
21"/Ultra SLIM-CRT
Non-PIP/LNA
South East Asia
21"/Ultra SLIM-CRT
Non-PIP/Non-LNA
Remark
Option2
1.X-Ray Protect Off Off
2.High Deviation Off Off
3.V-Guard On On
4.Sound Carrier Mute Off Off
5.Speaker Direct Direct By MODEL
6.PIP Device SDA9488 SDA9488
7.ZOOM Off Off
8.DNR OSD DNR DNR
9.AFT STEP Off Off
CheckSum: 5827 CS21Z45 CS21Z45
Middle East Asia
21"/SLIM-CRT
Non-PIP/Non-LNA
Remark
1.X-Ray Protect Off
2.High Deviation Off
3.V-Guard On
4.Sound Carrier Mute Off
5.Speaker 10W By MODEL
6.PIP Device SDA9488
7.Lang. Opion Iran
<Option1 Initial Lang>
*Iran:(Eng,Frn,Turkey,Persia)
*Arab:(Eng,Frn,Arab,Urdu)
8.Picture Size Off
CheckSum: CFB1 CS21Z45
★The underlined are items applied during the service adjustment. None of the others should be adjusted.

Alignment & Adjustment
3-4 Samsung Electronics
3. Deflection
No Item Adjust CIS South East Asia Middle East Asia Remark
1 V Amp Adjust 32 32 32
2V Shift Adjust 32 32 32
3H EW Adjust 32 32 32
4H Shift Adjust 32 32 32
5V Linearity FIX 40 43 43
6V S-Correction FIX 34 36 36
7V Slope FIX 30 30 30
8V Scroll FIX 34 34 34
9V Zoom FIX 48 48 48
10 H Parabola Adjust 32 32 32
11 Upper Corner Adjust 32 32 32
12 Lower Corner Adjust 32 32 32
13 H Trapezium Adjust 32 32 32
14 Bow Adjust 32 32 32
15 Angle Adjust 32 32 32
4. WSS Deflection
No Item Adjust CIS South East Asia Middle East Asia Remark
116:9 V Amp Adjust 10 10 10
216:9 V Shift Adjust 12 12 12
316:9 H Parabola Adjust 2 2 2
416:9 H Trapezium Adjust -12 -12 -12
514:9 V Amp Adjust -1 -1 -1
614:9 V Shift Adjust -4 -4 -4
714:9 H Parabola Adjust -2 -2 -2
814:9 H Trapezium Adjust 2 2 2
9VM Mode FIX 1 1 1
10 VM Gain FIX 1 1 1
11 VM Delay FIX 5 5 5
12 Preset Gain R FIX 20 20 20
13 Preset Gain G FIX 20 20 20
14 Preset Gain B FIX 20 20 20
15 Blue Screen HS Offset FIX 6 6 6

Alignment & Adjustment
Samsung Electronics 3-5

Alignment & Adjustment
3-6 Samsung Electronics
5. Video Adjust 1~5
＊Video Adjust 1
＊Video Adjust 2
No Item Adjust CIS South East Asia Middle East Asia Remark
1R Cutoff Adjust 32 32 32
2B Cutoff Adjust 32 32 32
3R Drive Adjust 32 32 32
4G Drive FIX 32 32 32
5B Drive Adjust 32 32 32
6Sub Bright Adjust 10 10 10
7Sub Contrast Adjust 10 10 10
8G2 Adjust Bright FIX 42 42 42 IC501:TDA6108AJF
9AKB Option FIX 0 0 0
10 Cathode Drive Level FIX 6 6 6 IC501:TDA6108AJF
11 TTX Bright FIX 10 10 10
12 TTX RGB Bright FIX 15 15 15
13 TTX Position FIX 11 11 11
14 Turbo Center Frequency FIX 2 2 2
15 Threshold Sound1 Carrier FIX 25 25 25
No Item Adjust CIS South East Asia Middle East Asia Remark
1Melody Volume FIX 35 35 35
2PAL/SECAM Sub Color Fix 12 12 12 LNA/N-LNA
3NTSC Sub Color FIX 10 10 10
4NTSC Sub Tint FIX 12 12 12
5YUV Sub Tint RF FIX 32 32 32
6YUV Sub Tint AV FIX 32 32 32
7YUV Sub Tint RGB FIX 32 32 32
8Blue Stretch FIX 1 1 1
9Soft Clipping Level FIX 0 0 0
10 Peak White Limit FIX 15 15 15
11 SECAM B-Y Offset FIX 1 1 1
12 Peaking CF0 & Delay Mode FIX 2 2 2
13 Sub Sharpness FIX 23 23 23
14 Video Dependent Coring RF FIX 1 1 1
15 Video Dependent Coring AV FIX 0 0 0

Alignment & Adjustment
Samsung Electronics 3-7
＊Video Adjust 3
＊Video Adjust 4
No Item Adjust CIS South East Asia Middle East Asia Remark
1 PIP Contrast Opt/Fix 3 3 3 PIP Only
2 PIP Bright Opt/Fix 3 3 3 PIP Only
3 PIP Tint Opt/Fix 64 64 64 PIP Only
4 PIP Color Opt/Fix 12 12 12 PIP Only
5PIP YC Delay Opt/Fix 6 6 6 PIP Only
6PIP PAL V. Pos Opt/Fix 0 0 0 PIP Only
7PIP NTSC V. pos Opt/Fix 7 7 7 PIP Only
8PIP H. Pos Opt/Fix 2 2 2 PIP Only
9PIP R Cutoff Opt/Fix 8 7 7 PIP Only
10 PIP G Cutoff Opt/Fix 8 7 7 PIP Only
11 PIP B Cutoff Opt/Fix 8 7 7 PIP Only
12 PIP R Drive Opt/Fix 60 50 50 PIP Only
13 PIP G Drive Opt/Fix 60 50 50 PIP Only
14 PIP B Drive Opt/Fix 60 50 50 PIP Only
No Item Adjust CIS South East Asia Middle East Asia Remark
1IF Preset Value 1 FIX 32 32 32
2IF Preset Value 2 FIX 32 32 32
3IF PLL Osc Preset Value FIX 0 0 0
4DCXO Caps/NICAM Center FIX 59 59 59
5DCXO Scaling Control Gain FIX 3 3 3
6RF AGC Adj/FIX 28 28 28 EU Adjust
7IF AGC Speed FIX 1 1 1
8IF Demodulator FIX 38 38 38
9Fast Filter IF PLL FIX 0 0 0
10 Wide Blanking Front FIX 15 15 15 Wide Only
11 Wide Blanking Rear FIX 15 15 15 Wide Only
12 PIP AGC Mode FIX 1 1 1 PIP Only
13 RF FOA/FOB FIX 1 1 1 ALL MODEL
14 RF PA/NT Ident Sensitivit FIX 1 1 1 ALL MODEL
15 AV PA/NT Ident Sensitivit FIX 2 2 2 ALL MODEL

6. YC Delay
Alignment & Adjustment
3-8 Samsung Electronics
＊Video Adjust 5
No Item Adjust CIS South East Asia Middle East Asia Remark
1Bypass of Chroma Base Band FIX 0 0 0
2Fixed Beam Current FIX 0 0 0
3Fixed Beam Current1 FIX 0 0 0
4Forced Colour On FIX 0 0 0
5Sync Performance Trick Mode FIX 0 0 0
6Beam Current Limiting FIX 0 0 0
7Comb Filter FIX 0 0 0
8RGB Comb Filter FIX 1 1 1
9Chroma Trap Mode FIX 0 0 0
10 EHT Tracking Mode FIX 1 1 1
11 Component R cutoff FIX 15 35 35
12 Component B cutoff FIX 0 32 32
13 BlueScreen Contrast FIX - 15 15
14 AV FOA/FOB FIX - 0 0
No Item Adjust CIS South East Asia Middle East Asia Remark
1 PAL Delay FIX 12 12 12
2SECAM Delay FIX 12 12 12
3NTSC Delay FIX 12 12 12
4PAL AV Delay FIX 12 12 12
5SECAM AV Delay FIX 12 12 12
6NTSC AV Delay FIX 12 12 12

Alignment & Adjustment
Samsung Electronics 3-9
7. Others
WHITE BALANCE
CIS South East Asia Middle East Asia Remark
H286/290 40FL 265/265 45FL 290/300 45FL
L286/290 2.0FL 265/265 2.5FL 290/300 2.5FL
No Item Adjust CIS South East Asia Middle East Asia Remark
1Service Blanking FIX 0 0 0
2High Current Level FIX 1 1 1
3Black Area FIX 2 2 2
4Black Stretch FIX 1 1 1
5OSD Brightness FIX 15 15 15
6 PWL Active FIX 1 1 1
7Bypass Peaking Delay FIX 0 0 0
8Ratio Pre & After Shoot FIX 0 0 0
9Ratio posi & Nega Peaks FIX 0 0 0
10 Dynamic Skin FIX 0 0 0
11 Gamma & White Stretch FIX 0 1 0 DNIE JR
12 Comb Filter Diode Clamp FIX 1 1 1
13 DC Transfer Ratio FIX 1 1 1
14 NTSC Matrix FIX 0 0 0

Alignment & Adjustment
3-10 Samsung Electronics
3-4 Service Adjustment
3-4-1 Adjusting the Picture Size
■Since the S16C chassis has the deflection settings data within the Factory Data, the picture size has to be adjusted when
replacing the Main Board or the VCTi Module, according to the following procedures.
①Display the Lion pattern. ②Press "Power Off →Info →Menu →Mute →Power On"
using the remote control and enter Factory Mode.
90
90
90
90
③Enter Deflection Mode. ④Adjust the V-AMP, V-SHIFT, H-AMP and H-SHIFT items so
that the width becomes 5 and the height becomes 4.

Alignment & Adjustment
Samsung Electronics 3-11
3-4-2 Adjusting the Picture Straight Lines
①Display the Cross Hatch pattern.
②Adjust settings other than V-AMP, V-SHIFT, H-AMP and H-SHIFT so that straight lines are displayed without curves.
⑦When the adjustments are complete, display the Lion pattern and check that the picture size has not been changed.
If there is no change, finish the adjustments.
③Adjust BOW and the Angle settings so that the center line
becomes a straight line.
④Adjust the H-Parabola and H-Trapezium settings so that
the left and right lines become straight.
⑤Adjust the Upper Corner and the Low Corner settings so that
the end of the lines become straight.
⑥Adjust the V-Linearity and V-SC settings so that the
intervals of the horizontal lines become uniform.

Alignment & Adjustment
3-12 Samsung Electronics
3-5 Software Upgrade
3-5-1 Checking the Version of the Software (Analog SW)
1. To enter Service Mode, press the keys on the remote control according to the following sequence. (in Stand-by status)
Info →Menu →Mute →Power On
2. When entering Service mode, the software information is displayed at the top of the service mode menu OSD.
ex) T-HITPEU-1000 2005/0X/XX