Samsung PN51F4500AFXZA E- Guide

• Memorizing channels
Using Channel menu
Blocking Programs
Other Features
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Options
Changing the Preset Sound Modes
Adjusting Sound Settings
1 • Executing initial setup
6 • Setting the Time
18 • Using the Sleep Timer
29 • Setting the On/Off Timer
Economical Solutions
Other Features
38
39
49
60
61
Advanced Features
69
70
72
73
78
8O
®
®
®
®
®
®
®
®
®
Viewing the e-Manual
Using Self Diagnosis
Uodating the Software
Changing the Use Mode
Viewing Contact Samsung
Using the Sports Mode
Using the Wireless Network
Managing the Network Connected Devices
Using the DLNA Functions (AIIShareTM
118
119
122
125
126
127
128
145
148
Using the Source List
Connecting a USB Device
89
90
Using Media Play
Controlling Photo /Video
Using the 3D function
x
97
Music Playback 101
110

Cl Memorizing channels
Your TV memorizes channels and adds the memorized channels to the Channe_
L..istwith the Auto Program function. Before your TV can memorize channels,
you must specify the signal source, either Air or Cab_e. If you select cable, when
you start Auto , you must also specify the cable system type, ,
HRO, or IIIIRO.If you don't know your cable system type, contact your local cable
company for the information. Most cable companies use STD.
@If you have connected your TV to a cable or satellite set top box, you do not
need to run the Auto Program function,
English

II Auto },,,=,_g _
_} MENU_ _ Broadcasting _ Auto IR_ogram _ ENTERC3_
Scans for channels automatically and stores them in the TV's memory.
To start Auto Program, follow these steps:
[]
2.
3.
Select Auto Program, and then press ENTERE34a.
Press the ENTERC}4abutton to select Sta£.
Select IBoth, Air, or CaMe by highlighting, and then pressing ENTERE34a.
English

1
1
6.
7.
@
If you selected Cable, you must specify your cable systems. First, select
IDigi Cable System, and then press ENTERE34a.
Select S ), HIRO,or IIIIAO,and then press ENTERE34a.
Repeat for Analog Cable System.
Select Scan, and then press ENTERE34a.Auto Program starts.
After all the available channels are stored, Auto Program removes scrambled
channels. When done, the Auto IR_ogram menu then reappears. This
process can take up to 30 minutes.
English

How to Stop Auto Programming
[]
2.
Press the ENTEREZ}4abutton to select Stop.
A message will ask Stop Auto Program? Select Yes by pressing the 4 or I_
button.
1Press the ENTERE34abutton.
1_ If you select Change Settings, the antenna setting screen appears. You
can re-set the antenna settings and start channel search again.
i_ Select Scan Again, and then press the ENTEREZ}4abutton to restart
channel search.
English