Samsung UN60ES8000 Guide

E MANUAL
SUPPORT
Thank you for purchasin9 this Samsuno oroquc_.
To recewe more complete service, please register
your product at
www.samsung.com/register
Vlodel Serial No.

• BD Wse
Provides the optimal picture quality for
Samsung DVD, Blu-ray and Home Theater
products which support BD Wse. When
the BD Wse is set to On, the picture mode
is automatically changed to the optimal
resolution.
@Available when you connect Samsung
products that support BD Wse through
an HDMI cable to the TV.
®Menu T/ysnsparency
Adjust transparency of menu box.

• Sound Feedback
Your TV gives sound feedback when you use
TV. Sound Feedback is enabled by default.
Turn off Sound Feedback or adjust its
volume.
• Pane Lock
Lock or unlock all the keys on the front panel
at once. When Pane Lock is on, none of the
keys on the front panel operate.
®Boo_::Logo
Displays the Samsung logo when the TV
turned on.
is

®Lght Effect
You can turn the LED on the TV's front panel
on or off. Turn it off to save power or if the
LED is too bright for you.
@SettheLght EffecttoO_ to reducethe
power consumption.
@The color of light may vary depending on
the model.
Anynet÷ (HDM/_-CEC
Menu -+ System -+ Anynet÷ (HDM -CEC}
Allows you to control all connected Samsung
devices that support anynet+ with your

Samsung TV's remote. For details on set up
options, refer to the "Anynet+ (HDMI-CEC)"
instructions.
DvX@ Vdeo On Demand
Menu -_ Syst:em -_ DivX@ Video On Dem_nd
Shows the registration code authorized for
the TV. If you connect to the DivX web site
and register with 10-digit registration code,
you can download the VOD activation file.
Once you play it using AilShare Play, the
registration iscompleted.
@For more information on DivX(R) VOD,
visit http://vod.divx.com.

Support Menu
The e-Manual is built into your TV. Open
the e-Manual to learn how to use your TV's
many features.
@For the detailed information about the
e-Manual Screen, refer to "How to view
the e-Manual" in the User's Manual.

Sef D agnosis
Menu -+ Support -+ Seif Diagnosis
®
Use to check for picture problems. P cture
Test displays a high definition picture that
you can examine for flaws or faults.
_s: Select _s if the test picture does not
appear or there is noise or distortion in the
test picture. There may be a problem with
the TV. Contact Samsung's Call Center for
assistance.
No: Select No if the test picture displays
properly. There may be a problem with

your external equipment. Please check your
connections, if the problem persists, refer to
the external device's user manual.
• 3ound _s_
Use the built-in melody to check for sound
problems.
@if you hear no sound from the TV's
speakers, before performing the sound
test, make sure 5peake_y3e ect: is set to TV
3peake__-in the 3ound menu, and then try
the speakers again.
@You will hear the melody during the test
even if you have set Speake__Seect to
Externa Speake__or have muted the

sound.
_i_: Select _: if you can hear sound from
only one speaker or from neither speaker
during the sound test. There may be a
problem with the TV. Contact Samsung's Call
Center for assistance.
No: Select No if you can hear sound from
the speakers. There may be a problem with
your external equipment. Please check your
connections, if the problem persists, refer to
the external device's user manual.

®C
(digital channels only)
The reception quality of over-the-air HD
channels is either perfect or the channels
are unavailable. Signal information displays
HD channel signal strength so you can adjust
your antenna to increase signal strength and
receive HD channels.
®
Reset all setting to factory defaults except
for your network settings.

To reset your
these steps
TV to defau t sett ng foow
1, Go to the Reset menu,
D agnos s -. Reset)
-_ Sef
2. The PIN input screen appears. Enter the
PIN using your remote.
11 When done, the PIN screen disappear
automatically. The message A the
sett ngs return to factory defau t:s_
appears.
11 Select _s. All settings have been
reset. The TV will turn off and on again
automatically. The Setup screen appears.
For more information about Setup, see

user manual.
®T/youb eshoo_: ng
if your TV seems to be having a problem,
access the troubleshooting guide for a
solution.
So_wa_e Updte
The So_wa_e Updas:emenu lets you upgrade
your TV's software to the latest version.
Current Version: This is the software version
already installed in the TV.

Upgrading to the Latest Version
You can upgrade infour ways:
- By USB
_ Aterr_atve So,ware
- Standby Mode Upgrade
The four methods are expla
following pages.
ined in the
%Be careful not to turn off the power until
the upgrade is complete. The TV will turn
off and on automatically after completing
the software upgrade. When you upgrade
software, all video and audio settings you

have made will return to their default
settings. We advise you to write down
your settings so that you can easily reset
them after the upgrade.
• ByUSB
To upgrade the By USB foow these steps
1. Visit www.samsung.com.
2. Download the latest USB software
upgrade exe archive to your computer.
3. Extracts the exe archive to your
computer. You should have a single folder
with the same name as the exe file.

4. Copy the folder to a USBflash drive.
5. Turn on the TV, and then insert the USB
flash drive into the USB port of the TV.
6. in the TV's menu, go to Suppo:t --.
So_ a_*eUpdate.
7. Select By USB.
@Please be careful not to remove the USB
drive until the upgrade is complete.
• Onne
The Onne function lets you download the
upgrade software directly from the lnternet
into your TV and then upgrade the software

in one operation. To use Onne, you must
have configured your TV to connect to your
network and the TV must be connected to
the lnternet. See the "Setting up the Wired
or Wireless Network" instructions.
To upg:°ade usng _::heOnne foow s_:hese
1. Select the Onne. The Connecting to
Server message appears.
2. if there is a download available, the
Download pop-up appears with a
progress bar and the download starts.
3. When the download is complete, the

Upgrade Query screen appears with three
choices: Upgrade Now, Upgrade La_::er,or
Don s:_Upgl_sde.
if you select the Upgrade Now, the TV
upgrades the software, turns off, and
then turns on automatically.
if you do not make a selection in one
minute or select the Upgrade La_t:er,the
TV stores the new upgrade software.
You can upgrade the software later
using the Alternative Software
function.
if you select the Dons::Upgrade, the TV
cancels the upgrade.

• Aternatve So_ are
The A ternat ve SoQware option lets you
upgrade using a file the TV downloaded
earlier, but you decided not to install
immediately, or a file downloaded by the
TV in Standby Mode (See Standby Mode
Upgrade on the next section).
To upgrade usng A ternat ve So.ware
foow these steps:
1. if upgrade software has been
downloaded, you will see the software
version number to the right of A ternat ve
3o_ _re.
2. Select Aternatve So_ are.

3. The TV displays a message asking if you
want to upgrade. Select Yes. The TV
begins the upgrade.
4. When the upgrade is complete, the TV
turns off automatically, and then turns
on.
®
You can set the _:;:::tas _._v,._cJ_,_,3 sd
function so that the TV downloads new
upgrade software when it is in Standby
mode.
in Standby mode, the TV is off, but its
lnternet connection is active. This allows
the TV to download upgrade software

automatically, when you are not using it.
Because the TV is turned on internally, the
screen may glow slightly. This phenomenon
may continue for more than 1 hour until the
software download is complete.
To set Standby Mode Upgrade foow these
1, Select the Standby Mode Upg_sde.
:2. Select On or Off.
Off: if you select Off, the TV will notify
you with a pop up message when new
upgrade software is available.
On: if you select On, the TV will