Samsung sr8894 User manual

Robotic Vacuum Cleaner
User Manual
✻ Before operating this unit, please read the instructions carefully.
✻ For indoor use only.
English
imagine the possibilities
Thank you for purchasing a Samsung product.

2_ Safety information
Safety information
CAUTION/WARNING SYMBOLS USED
WARNING
Indicates that a danger of death or serious injury exists.
CAUTION Indicates that a risk of personal injury or material damage exists.
OTHER SYMBOLS USED
NOTE
Explains terms to help users understand how use the product properly.
SAFETY INFORMATION
• Before operating the appliance, please read this manual thoroughly and retain
it for your reference.
• Because these following operating instructions cover various models, the
characteristics of your vacuum cleaner may differ slightly from those described
in this manual.
WARNING
WARNING

Safety information _3
Safety information
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be
observed, including the following:
READ ALL INSTRUCTIONS BEFORE USING YOUR ROBOTIC
VACUUM CLEANER.
Unplug from outlet when not in use and before conducting maintenance.
WARNING: to reduce the risk of fire, electric shock, or injury:
GENERAL
• Use only as described in this manual.
•
Do not operate the robotic vacuum cleaner or charger if it has been
damaged in any way.
• If the cleaner is not working as it should, has been dropped,
damaged, left outdoors, or dropped in water, return it to a
customer care center.
• Do not handle the charger or robotic vacuum cleaner with wet
hands.
• Use only on dry, indoor surfaces.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
BATTERY CHARGER
• Do not modify the polarized plug to fit a non-polarized outlet or
extension cord.
• Do not use outdoors or on wet surfaces.
• Unplug the charger from the outlet when not in use and before
servicing.
• Use only the charger supplied by the manufacturer to recharge.
• Do not use with a damaged cord or plug.
• Do not pull or carry by the cord, use the cord as a handle, close
the door on the cord, or pull the cord around sharp edges or
corners. Keep the cord away from heated surfaces.

4_ Safety information
Safety information
• Do not use extension cords or outlets with inadequate current
carrying capacity.
• Do not unplug by pulling on the cord. To unplug, grasp the plug,
not the cord.
• Do not mutilate or incinerate batteries as they will explode at
high temperatures.
• Do not attempt to open the charger. Repairs should only be
carried out by a qualified customer care centre.
• Do not expose the charger to high temperatures or allow
moisture or humidity of any kind to come into contact with the
charger.
ROBOTIC VACUUM CLEANER
• Do not pick up hard or sharp objects such as glass, nails,
screws, coins, and etc.
• Do not use without a filter in place. When servicing the unit,
never put fingers or other objects into the fan chamber in case
the unit accidentally turns on.
• Do not put any objects into openings. Do not use with any
openings blocked; keep openings free of dust, lint, hair, and
anything that may reduce air flow.
• Do not pick up toxic materials (chlorine bleach, ammonia, drain
cleaner, etc.).
• Do not pick up anything that is burning or causing a smoke,
such as cigarettes, matches, or hot ashes.
• Do not use to pick up flammable or combustible liquids such as
gasoline, nor use on areas where they may be present.
• Do not use robotic vacuum cleaner in an enclosed space filled
with vapours given off by oil based paint, paint thinner, moth
proofing substances, flammable dust, or other explosive or toxic
vapours.
• Leaks from battery cells can occur under extreme usage or
temperature conditions. If the liquid gets on skin, wash quickly
with water. If the liquid gets into the eyes, flush them immediately
with clean water for a minimum of 10 minutes. Seek medical
attention.

Contents _5
Contents
SAFETY INFORMATION
2
6 Power related
7 Before use
10 In use
11 Cleaning and maintenance
PRODUCT FEATURES
13
TROUBLESHOOTING
43
43 Checklist before svc calls
45 Troubleshooting for error codes
46 Warnings about battery
46 How to remove the battery
ASSEMBLING THE CLEANER
15
15 Components
16 Name of each part
OPERATING THE CLEANER
20
20 Installing the robotic vacuum cleaner
20 Instalation order
20 Turning the power switch on or off
21 Installing the charger
22 Charging
23 About the battery
24 Setting the time
25 Installing the virtual guard (option)
27 Using the robotic vacuum cleaner
27 Attaching a mop (option)
28 Starting/stopping cleaning
29 Recharging
30 Auto cleaning
31 Spot cleaning
32 Max cleaning
33 Manual cleaning
34 Scheduled cleaning
35 Setting daily cleaning
MAINTAIN TOOLS AND FILTER
36
36 Using additional functions
36 Cleaning the robotic vacuum cleaner
36 Please keep the cleaning and maintenance
methods in mind
37 Cleaning the sensor window and the camera
37 Emptying dust quickly
38 Cleaning the dust bin and the filter
39 Cleaning the power brush
41 Cleaning the edge-cleaning side rotating brush
42 Cleaning the driving wheel
42 Caring for the mop (option)
PRODUCT SPECIFICATION
49

6_ Safety information
Safety information
POWER RELATED
Do not bend the power cord forcefully or place a
heavy object on it that could break it.
- This may result in fire or electric shock.
Do not use a damaged power cord, plug, or a loose
power outlet.
- This may result in fire or electric shock.
Do not use multiple plugs in a single socket.
(Do not leave the cord lying exposed on the floor.)
- This may result in fire or electric shock.
Do not pull the power plug by the cord or touch the
plug with wet hands.
- This may result in fire or electric shock.
Make sure to remove any dust or water from the
power plug.
- Failing to do so may result in a malfunction or electric
shock.
WARNING
WARNING
WARNING
WARNING
WARNING

Safety information _7
Safety information
01 Safety information
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
BEFORE USE
Before activating the robotic vacuum cleaner, make sure
that the dust bin is assembled.
- If the dust bin is not inserted, robotic vacuum cleaner will not
operate.
Never use robotic vacuum cleaner in locations with
combustible material such as:
- Locations with candles or desk lamps on the floor.
- Locations with unattended fires (fire or embers).
- Locations with gasoline, distilled alcohol, thinner, ashtrays
with burning cigarettes, etc.
Robotic vacuum cleaner is for domestic use only. Do not use it in the following
locations.
- Attics, basements, warehouses, industrial buildings, separate rooms distant from the
main building, locations exposed to wet or damp conditions such as bathrooms or
wash rooms, and narrow and highly situated locations such as tables or shelves. Critical
damage (abnormal operation and breakage) may occur when used in these locations.
Open all doors to clean all rooms.
- When a door is closed, the robotic vacuum cleaner will not be able to enter that room.
-
However, make sure to close the doors to the main entrance, the veranda and the
bathroom, and any other rooms where the robotic vacuum cleaner may fall to a lower floor.
For carpets with long tassels, fold the tassels under the
carpet.
- Unfolded tassels may result in critical damage to the carpet
and the machine itself, as they get caught in the driving wheel
or the power brush.
< OPTION >
When the cliff sensor is polluted, the robotic
vacuum cleaner may be in danger of falling
down the stairs.
This may cause personal injury and critical
damage to the product.
To prevent risk, install the VIRTUAL GUARDs
(Fence Mode setting) in front of dagerous
areas. Clean the sensor window and camera.

8_ Safety information
Safety information
BEFORE USE
Remove objects scattered on the floor before cleaning.
-
Robotic vacuum cleaner is designed to detect obstacles 5cm away
from it.
- Bath towels, pads in front of bathrooms and sinks, entrances, utility
rooms, power cords, table cloths or belts can become entangled in
the driving wheel or power brush. This can cause objects to fall from
the table.
Remove small objects or brittle items from the area to be
cleaned in advance.
- Make sure to clear any objects before cleaning.
- Make sure to remove fragile items such as china, glass objects,
flowerpots, etc.
- Robotic vacuum cleaner does not recognize coins, rings or other
valuable items such as jewelry.
Inform all family members (or relevant parties) to be cautious
before cleaning or when using the Scheduled Cleaning Mode.
- Robotic vacuum cleaner may run into children, causing them to fall.
Ensure that children do not step or sit on the robotic vacuum.
- Children may fall and injure themselves or critical damage may occur
to the product.
When a child or pet is left alone, make sure to turn off the
Power Switch of the robotic vacuum cleaner.
- Robotic vacuum cleaner may attract their attention.
- When the rotating wheel or brush catches fingers, feet, clothing or hair,
this may result in injury.
- If a child or pet is in the way of the robotic vacuum cleaner, it may be
identified as an obstacle and the area may not cleaned.
- When the Power Switch is turned off, it will cut off the power supply and
deactivate all functions.
When installing the charger station, do not leave the power
cord exposed on the floor.
- When the robotic vacuum cleaner automatically recharges or passes
by the charger station, it may drag the power cord around with it.
Always keep the power cord of the charger plugged into the
outlet.
- Although the robotic vacuum cleaner has a self-charging function, if
the power cord of the charger station is unplugged, it cannot charge
its battery automatically.
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION

Safety information _9
Safety information
01 Safety information
CAUTION
BEFORE USE
Install the charger in a location that can be easily accessed
by the robotic vacuum cleaner.
- If the charger is installed in a corner, this may cause extra
movements and may disturb the automatic recharging process.
Do not use the charger for other purposes.
- This may result in critical damage to the charger or cause a fire.
WARNING
Make sure the robotic vacuum cleaner does not vacuum or
move over liquids such as water, oil or pet litter.
-
This may result in critical damage to the product.
- Liquids may spread through the wheels resulting in contamination.
WARNING
Objects in front of the charger will prevent the robotic
vacuum cleaner from auto-charging itself.
- Clear the area.
CAUTION
There should be no obstacles 0.5 m to the left and
right and within 1 m of the front.
WARNING
Make sure that there is no trace of liquids on the charger
station.
- Failing to do so may result in fire or electric shock.
WARNING
Do not short-circuit the charge pins with metal objects such
as chopsticks, screwdrivers, and etc.
- This will result in critical damage to the charger.
WARNING
about 0.5m
about 0.5m
about 1m
about 1m
about 0.5m
about 0.5m
CAUTION
Do not use the cleaner on a black floor.
- The vacuum cleaning robot may not run normally in this case.

10_ Safety information
Safety information
NOTE
IN USE
You cannot use the robotic vacuum cleaner on thick carpets.
- This may result in problems with the robotic vacuum cleaner.
- This may result in damage to carpets.
Robotic vacuum cleaner may not be able to continue its
operation if it is stuck at the entrance or veranda doorsill.
- Robotic vacuum cleaner stops operating for safety reasons if it
cannot move for more than 5 minutes.
- To resume operating, turn the Power Switch off and then on again
after moving it to a location where it can continue cleaning.
If an unusual sound, smell or smoke is emitted from the robotic
vacuum cleaner, immediately turn off the Power Switch and call
the customer care center.
WARNING
Do not use the robotic vacuum cleaner on a table or other high
locations.
- This may result in damage when the unit accidentally drops.
CAUTION
Robotic vacuum cleaner may bump into furniture such as chair
legs, table legs, thin and long furniture, etc. while operating.
- For a quicker and cleaner performance, place the chairs on top of
the table.
Immediately remove any large pieces of
paper or plastic bags from the machine while cleaning.
- Using the machine for an extended period of time with its inlet port
obstructed may result in critical damage to the product.
Do not place any objects on top of the robotic vacuum cleaner.
- This may result in malfunction.
CAUTION
CAUTION
CAUTION
CAUTION

Safety information _11
Safety information
01 Safety information
NOTE
IN USE
Robotic vacuum cleaner cannot completely clean locations that
it cannot reach, such as corners, and spaces between sofas
and walls.
- Please clean these locations occasionally.
NOTE
Dust clusters may remain after cleaning, when the robotic vacuum cleaner fails to
pick up dust clusters that were formed while cleaning.
- In this case, sweep up the dust with another cleaning tool.
This product is not suitable for wet mops. (option)
CAUTION
The cleaning robot cannot move over carpets after the mop
is attached. (option)
- To clean a carpet, remove the mop and mop plate first.
CAUTION
CLEANING AND MAINTENANCE
When cleaning the product, do not spray water directly onto the
exterior or wipe it with a volatile material such as benzene,
thinner or alcohol.
- This may result in critical damage to the product.
CAUTION
The unit must not be disassembled or reconstructed by anyone
other than a qualified service engineer.
- This may result in damage to the product.
CAUTION
Do not forcefully press the bumper on the robotic vacuum
cleaner.
- If the bumper sensor gets damaged, the robotic vacuum cleaner may
bump into walls or furniture.
CAUTION

12_ Safety information
Safety information
CLEANING AND MAINTENANCE
If the power cord is damaged, have it replaced by a qualified
service engineer from the customer care center.
- Failing to do so may result in fire or electric shock.
WARNING
Before cleaning the charger, make sure to disconnect the
power cord for safety.
After cleaning, wash the mop and dry it completely before
using it again. (option)
- Failing to do so may result in bad odors.
WARNING
WARNING
When removing foreign substances, always use the cleaning
brush after turning the Power Switch off.
- Failing to do so may result in sudden operation of the unit and
cause an injury or critical damage to the product.
WARNING
Edge-cleaning
side brush
Contact the Samsung Electronics customer care center to
replace the battery.
- Failing to use original batteries will result in product failure.
WARNING
Power brush
Remove any foreign substances accumulated on the Obstacle
and Cliff sensors on a regular basis.
- Dirt accumulated on the sensors will result in inaccurate functioning
of the sensors.
WARNING
Obstacle sensor
Cliff sensor

Product Features _13
Product Features
EASY DUST OUTLET
The dust output at the top enables emptying the dust bin easily using
a normal vacuum cleaner without dust flying around.
VARIOUS CLEANING MODES
Various cleaning modes are provided to meet all your needs.
1. Auto Mode :
Cleans all rooms automatically.
2. Spot Mode :
Cleans a localized area intensely.
It can be used to clean bread or
cookie crumbs.
3. Max Mode : Runs until the battery is nearly depleted.
4. Manual Mode : You can clean the floor manually by moving the cleaning robot.
5. Turbo Mode :
Since the power brush rotates at maximum speed in this mode, the
product will clean more effectively.(You can switch the mode with the remote control.)
6. Edge Mode : When the Obstacle Sensor detects an obstacle during the cleaning,
the Robot Cleaner reduces its speed to minimize the bumping impact and the Bumper
Sensor also helps it lower the bumping impact. And, it cleans the corners by reaching
to them as close as possible.
7. Scheduled Cleaning Mode : At the specified time, the cleaning robot cleans the floor.
8. Daily Cleaning Mode : The cleaning robot cleans the floor everyday at the specified time.
4
Mon
Tue
Wed
Thu
Fri
Sat
Sun
~
876
5
3
1
CONVENIENT VIRTUAL GUARD FUNCTION
You can confine the robotic vacuum cleaner to a particular section by using the Fence (virtual
wall) mode.
• What is ceiling shape recognition
(Visionary mappingTM)?
This function recognizes the shape of the ceiling
using the camera on top to identify the area to
be cleaned and determines the best way to pass
over and clean every section of the floor.
DELICATE CLEANING OF EVERY CORNER
Since the robotic vacuum cleaner cleans the floor in a sequential way ( ) along the map
determined by the ceiling shape recognition function, it cleans every corner of the floor.
2
Approximately 1.5 m
Approximately 1.5 m

14_ Product Features
Product Features
DOORSILL CROSSING
The robotic vacuum cleaner’s innovative driving system
makes it possible for it to cross over doorsills with a height
of about 1.5cm and clean all rooms. The robotic vacuum
cleaner may not be able to pass a 1.5cm doorsill depending
on the shape of the doorsill.
ANTI-CRASH
The robotic vacuum cleaner detects and avoids obstacles
in 2 stages. First, the 8 obstacle sensors detect obstacles in
stage 1 and if the robotic vacuum cleaner does crash into an
obstacle, the 2 bumper sensors absorb the impact.
EDGE-CLEANING SIDE ROTATING BRUSH
The edge-cleaning side rotating brush cleans dust from the
edges.
AUTO CHARGING
When the battery is low, the robotic vacuum cleaner is
automatically guided to the charger to enable it to perform a
quick auto charge.
ANTI-FALLING
SAFETY DEVICE
The 3 Cliff sensors detect downward steps such as stairs or
the front door threshold to prevent robotic vacuum cleaner
from falling down stairs.
When the robotic vacuum cleaner is lifted up while cleaning,
the driving wheels, power brush, suction motor, and side
rotating brush are stopped autonati(all) by sensor.
Stair type Vertical type
About 1.5cm

Assembling the cleaner _15
02 Assembling the cleAner
Assembling the cleaner
COMPONENTS
■Main Body
■
Others Components
■Charger (Station)
■Remote Control
Remote Control
Cradle
Cleaning Brush
Spare Filter
VIRTUALGUARD
User Manual
(CD-ROM) / 2 Battery
(option)
Microfiber Mop
(option)
Mop Plate
(option)
Spare Power Brush
(option)

16_ Assembling the cleaner
Assembling the cleaner
NAME OF EACH PART
[ Main unit ]
Side
Bottom
Front
Operating Button
Dust Outlet
Display Panel
Camera
Obstacle Sensor
Bumper Sensor
VIRTUAL
GUARD Sensor
Remote Control
Sensor
Remote Control
Sensor
Dust Bin
Dust Bin Eject
Button
Dust Outlet
Driving Wheel
Battery Cover
Power Brush
Power Brush
Cover
Power Switch
Driving Wheel
Cliff Sensor
Cliff Sensor
Charge Pin
Side Brush
Cliff Sensor
Charge Pin
Roller
Obstacle Sensor

Assembling the cleaner _17
Assembling the cleaner
02 Assembling the cleAner
NAME OF EACH PART
[ Charger (Station) ]
Batteries are not supplied with the product. You have to purchase the batteries
separately. Install the batteries (type D) before use.
■
Installing the batteries
Lift the cover of the
VIRTUAL GUARD while
pressing the locking tab.
Install the batteries into the
VIRTUAL GUARD as shown
by the figure below. (If the
batteries are installed with
the incorrect polarity, the
VIRTUAL GUARD will not work.)
After inserting the tip of
the cover into the slot,
push the other end to
close it until it clicks into
place.
1 2 3
✽Specification: Type D (LR20) batteries
[ VIRTUAL GUARD : OPTION ]
Distance Detection Sensor
Main Body
Detection Sensor
Mode/Power Button
Mode Lamp
Charge Pin
Remote Control
Holder
Vents
Catching Sill
Charging Lamp
Power
Lamp

18_ Assembling the cleaner
Assembling the cleaner
NAME OF EACH PART
[ Remote Control ]
Lift the battery
compartment cover at
the back of the remote
control, while pressing
the locking tab.
Install the batteries into the
remote control as shown
by the figure below. (If the
batteries are installed with
the wrong polarity, the
remote control will not work.)
After inserting the tip of
the cover into the slot,
push the other end to
close it until it clicks into
place.
1 2 3
✽Specification: AAA type batteries
Batteries are not installed in the remote control when purchasing the product.
Install the batteries (type AAA) before use.
■Installing the Remote Control Batteries
(moving backwards
is not supported.)
Power Recharging
Max
Spot
Timer/Daily
Clock
Start/Stop
Edge
Auto
Directional
Buttons
Manual
Turbo

Assembling the cleaner _19
Assembling the cleaner
02 Assembling the cleAner
NAME OF EACH PART
DISPLAY PART
1. Number Display
- Shows the timer display, progress status, and error codes using numbers, letters and graphics.
2. Battery Level Indicator
- Charging : Shows the charging progress in 3 steps.
- In Use : Shows the battery charge level. The battery charge level is reduced by each level from FULL
while operating. (When the battery is fully discharged, one level will flash to display “LO”.)
3. Scheduled Cleaning
- When cleaning is scheduled, the Scheduled Cleaning icon is lit.
4. Daily
- When daily cleaning is scheduled, the Daily icon is lit.
5. Recharging
- This icon turns on when the cleaning robot returns to the charger station to charge its battery.
6. Cleaning Mode Display
- Each time the Cleaning Mode button is pressed, the corresponding cleaning mode is displayed.
(a) Auto Mode : This icon turns on when Auto cleaning mode is selected.
(b) Spot Mode : This icon turns on when Spot cleaning mode is selected.
(c) Max Mode : This icon turns on when Max cleaning mode is selected.
(d) Manual Mode : This icon turns on when Manual cleaning mode is selected.
BUTTON PART
7. Start/Stop
- Press to start/stop cleaning.
8. Cleaning Mode
- Press to select a cleaning mode. After selecting a cleaning mode, press the ( ) button to start cleaning.
9. Timer/Daily
- Press to set a scheduled or daily cleaning.
10. Recharging
- When this button is pressed, the Recharging icon is turned on and the cleaning robot will return to the
charger station to charge its battery.
1
2
5
9108
4
7
3
6
ⓐ ⓑ ⓒ ⓓ
[ Display panel]

20_ Operating the cleaner
Operating the cleaner
INSTALATION ORDER
1. Turning the Power Switch on or off
To use the robotic vacuum cleaner, you must turn on the Power Switch at the
bottom of the main unit.
2. Installing the Charger
To charge the robotic vacuum cleaner, you must first install the
charger.
Since the battery is discharged when the product is purchased,
you must fully charge the battery before use.
3. Charging the Battery
You should charge the battery completely before using the
robotic vacuum cleaner.
4. Setting the Time
You should set the time to use the scheduled and daily cleaning options.
5. Installing the VIRTUAL GUARD
You can confine the vacuum cleaning robot to a particular section by using Fence
(virtual wall) mode.
6. Attaching a mop
Attach the mop to the bottom of the cleaning robot.
INSTALLING THE ROBOTIC VACUUM CLEANER
CAUTION
If the Power Switch is turned off, the robotic vacuum cleaner will not be charged
even if it is docked with the charger station.
To use the robotic vacuum cleaner, you must turn the
Power Switch on.
If you turn the Power Switch off, all settings will be reset.
1.
Turn over the main unit and turn the Power Switch on.
- If the icons are not turned on, it indicates that the
battery charge is depleted. In this case, dock the
robotic vacuum cleaner to the charger station after
turning the Power Switch on.
- The configured time may be different from the current
time. If the configure time is incorrect, set the time to
the current time.
✽When no key is pressed for approximately 5 minutes when the power is on, the
power is automatically turned off to save battery power. In this case, to use this
robotic vacuum cleaner again, please push the “Power” button or “Start/Stop”
button.
TURNING THE POWER SWITCH ON OR OFF