Sangean PR-D4W User manual

PR-D4W
Revision 1
中文
GB

1
GB
Important safety instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Please read all instructions carefully.
Please keep these instructions for future reference.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not t into your outlet.
Consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

2
11.
12.
13.
14.
15.
16.
17.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or table specied
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally or has been dropped.
To Reduce the Risk of Fire or Electric Shock, Do not Expose
This Appliance To Rain or Moisture.
The Shock Hazard Marking and Associated Graphical Symbol
is provided on the rear of unit.
Apparatus shall not be exposed to dripping or splashing and no
objects lled with liquids, shall be placed on the apparatus.

3
GB
18.
19.
Long term exposure to loud music may cause hearing damage
or hearing loss. It is best to avoid long term extreme volume
listening while using headphones with this device.
The power plug should be close to the radio, and easy to
unplug in case of an emergency. To disconnect the power from
the radio, just unplug the power plug from the AC power outlet.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements,
no change to the antenna or the device is permitted. Any
change to the antenna or the device could result in the device
exceeding the RF exposure requirements and void user’s
authority to operate the device, and all warranties.
CAUTION:
To reduce the risk of the electric shock, do not perform any
servicing other than that contained in the operating instructions
unless you are qualied to so.

4

5
GB
Speaker
Band button/Tuning step button
LCD display
Buzzer alarm button
Radio alarm button
Display button/Bandwidth button
Weather Alert button
Standby/Power button/Sleep button
Weather Alert indicator
Scan button/Time setting button
Tuning up button
Tuning down button
Preset button
Volume button
Headphone socket
Auxiliary input socket
DC IN socket
Battery compartment
Telescopic Antenna
Controls
2
3
1
5
7
16
15
14
13
12
11
10
9
4
6
8
17
18
19

6
Battery power indicator
FM stereo indicator
Sleep/Snooze indicator
Buzzer alarm indicator
Signal strength meter
Radio alarm indicator
Weather alert mode (Alert light only)
Weather alert mode (Alert light+ Siren)
Weather alert mode (Alert light+ weather broadcasting)
Time set indicator
Bandwidth indicator
Clock second
Frequency and clock display
AM/PM indicator
Indicates Band in use
Aux in indicator
Display icons
P
O
N
M
L
K
J
I
H
A
F
D
G
E
C
B

7
GB
Battery operation
1. Open the battery cover on the rear of the unit by pressing the latch.
2. Insert four UM-1 (D size) batteries into the spaces in the compartment.
3. Make sure all batteries are inserted with correct polarity as shown
on the rear cabinet. Replace the battery cover.
4. Reduced power, distortion and a “stuttering sound” or low battery
sign ashing with an “E“ shown on the display are all signs that
the batteries need replacing.
5. If the radio is not to be used for an extended period of time, it is
recommended that the batteries are removed from the radio.
Using the AC power adaptor
The AC power adaptor included with this unit is 6 volts DC at 400
mA center pin positive.
Insert the adaptor plug into the DC socket on the left side of the
radio. Plug the adaptor into a standard AC outlet.
Whenever the adaptor is used, the batteries are automatically
disconnected. The AC adaptor should be disconnected from the
main supply when not in use.
IMPORTANT:
The AC power adaptor is used to connect the radio to your power
supply. The AC adapter used for the radio must remain accessible
during normal use. In order to disconnect the radio from the power
outlet completely.

8
Setting the clock
1. Clock can be set when the radio is powered on or off.
2. Display will show “ -: - - “ when the batteries are installed or when
the radio is connected to the main power supply.
3. Press and hold the Scan/Time setting button until it beeps, the
display will ash time set symbol as well as the hour digits.
4. Press Tuning Up/Down buttons to set the required hours.
5. Press the Scan/Time setting button, the minute digits will ash.
6. Press Tuning Up/Down buttons to set required minute.
7. Press the Scan/Time setting button to complete time setting.
Operating the radio
This radio is equipped with three tuning methods – Scan tuning,
Manual tuning and Memory presets recall.
Note:
The PR-D4W is equipped with AM Auto Tracking that will
automatically optimize the sensitivity of the station you're tuned to
and helps pull in distant stations.

9
GB
Scan tuning
1. Press the Standby/Power button to turn on the radio.
2. Select the required frequency band by pressing the Band button.
For the FM band fully extend and rotate telescopic antenna to get
best reception. For the (AM) band, rotate the radio to get the best
signal. (Please note this radio has a built-in AM antenna)
3. Press and release Scan button (press and hold the Scan button
for more than 2 seconds will activate time setting), the radio will
up search and stop automatically when it nds a radio station.
Press the Scan button again to listen to the found station.
Note:
The radio will continue to search for the next available stations
if you do not press the Scan button again when it finds a radio
station.
4. Rotate the Volume control to get your required sound level.
5. To turn off the radio, press the Standby/Power button. Display
will show OFF.
If you want to know the current time, simply press the Display
button.