Thank you for choosing Vega Session Border Controller!
}Getting Started
Visit sbc.docs.sangoma.com to view the User Guide for these
steps to installing your appliance:
• Installation
• Getting Started
•
• Operation
• Backup and Restore
• Troubleshooting
• Release Notes
• Update Software
For additional information, visit: wiki.sangoma.com/SBC
Rack rail installation instructions are under the Appendix submenu.
SBC WebGUI or SSH Access:
Front RJ45 port labeled 0
Static IP: 192.168.168.2
WebUI URL: http://192.168.168.2/
Username: root
Password: sangoma
SBC Console Access:
Front RJ45 port labeled Console
SBC Console baud setting: 115200,n,1
Username: root
Password: sangoma
Use any serial console client such as: hyper terminal, putty or minicom.
Please change the default passwords to prevent
unwanted remote access.
To power ON the appliance:
1. Appliance will power on as soon as power supply is plugged in
2. Push and hold the front power button until the power LED
indicator lights up
To power OFF the appliance:
1. Graceful shutdown: Log into the appliance and gracefully
shutdown or reboot from GUI
2. Forced shutdown: Press and hold the rear power button until the
appliance turns off
Note: Nothing will happen if the power button is pressed once.
To RESET the appliance:
1. Press the reset pin once.
The appliance credentials will default to factory settings.
}Warranty
Standard 12-month warranty is included. Additional warranty services
available, contact your Sales representative for more information.
}Training
Sangoma offers online introductory and in-class advanced technical
training. Visit sangoma.com/training for upcoming (or watch past)
Thank you for choosing Vega Session Border Controller!
}Getting Started
Visit sbc.docs.sangoma.com to view the User Guide for these
steps to installing your appliance:
• Installation
• Getting Started
•
• Operation
• Backup and Restore
• Troubleshooting
• Release Notes
• Update Software
For additional information, visit: wiki.sangoma.com/SBC
Rack rail installation instructions are under the Appendix submenu.
SBC WebGUI or SSH Access:
Front RJ45 port labeled 0
Static IP: 192.168.168.2
WebUI URL: http://192.168.168.2/
Username: root
Password: sangoma
SBC Console Access:
Front RJ45 port labeled Console
SBC Console baud setting: 115200,n,1
Username: root
Password: sangoma
Use any serial console client such as: hyper terminal, putty or minicom.
Please change the default passwords to prevent
unwanted remote access.
To power ON the appliance:
1. Appliance will power on as soon as power supply is plugged in
2. Push and hold the front power button until the power LED
indicator lights up
To power OFF the appliance:
1. Graceful shutdown: Log into the appliance and gracefully
shutdown or reboot from GUI
2. Forced shutdown: Press and hold the rear power button until the
appliance turns off
Note: Nothing will happen if the power button is pressed once.
To RESET the appliance:
1. Press the reset pin once.
The appliance credentials will default to factory settings.
}Warranty
Standard 12-month warranty is included. Additional warranty services
available, contact your Sales representative for more information.
}Training
Sangoma offers online introductory and in-class advanced technical
training. Visit sangoma.com/training for upcoming (or watch past)
