Sanipex BAGNODESIGN BDD-ZEP-560 Series User manual

BDD-ZEP-560-XX
ZEPHYR BODY JET 48X48MM
www.sanipexgroup.com

IMPORTANT PLEASE READ
 B 
 

 






 L  C 



 x 
           
          
 








 









2Clean carefully the pipes and
check the water flow before
connecting the bodyjet to the
system to ensure a good
operation.
1Make sure that the connections
are ready for bodyjet.
Installation Steps For Walls Fixing
Remove the backside bolt used by
a suitable Allen key.
3Fix the bolt into the wall outlet
connection.
4
Nut
Rubber Washer
Cover Plate
Body Jet

Cleaning All surface should be cleaned using a clean damp cloth. No abrasive
cleaning agents or materials should be used.
Clean the connection and fix the
5 body-jet followed by the back
plate.
Installation complete.
6

Installation Steps for PVC, Cement Board Walls etc.
NOTE:First steps from method # 1 will remain the same.
Fix the back nut followed by
rubber washer to the bolt on
the back side of the board
or pvc.
3
45 Installation complete.
Clean the connection from both
sides of the wall and push body-jet
into the outlet connection
carefully.
2
Front side of the fixing board Back side of the fixing board

Note:

IND-ZEP-560-XX-02-22
www.sanipexgroup.com