Hardware Connection
System Configuration
QUICK INSTALLATION GUIDE v1.0
• 3.5” Hard Drive Enclosure with Removable Tray
• Dual host interface: USB 2.0 and eSATA.
• Supports High Performance SATA hard drives.
• Ultra quiet operation.
• Vertical placement stand included.
• Durable aluminum housing.
• Supports both Windows and Mac OS X.
• 2-Bay External RAID Enclosure
• Supports JBOD mode.
• USB 2.0 (MS2U+) and eSATA (MS2T+) interface.
• Drive Interface: 3.5” x 2 SATA I/ SATA II hard drives.
• Hot-swappable removable tray.
• Supports the lastest 1TB hard drive.
• Hard disk, fan and temperature failure detectors.
• 2-Bay External RAID Enclosure
• Hardware RAID design, supporting RAID 0, 1, JBOD, BID, SAFE33, and
SAFE55, with eSATA and USB 2.0 interfaces.
• Drive Interface: 3.5” x 2 SATA I/ SATA II hard drives.
• Hot-swappable removable tray.
• Data auto-rebuilding.
• Hard drive, fan and temperature failure detectors.
• 4-Bay External RAID Enclosure
• Support JBOD for independent access up to four hard drives.
• 1394b x 2 (MS4B), eSATA x 4 (MS4T), USB 2.0 & Port Multiplier (MS4UM).
• Drive interface: 4 x 3.5" SATA I/ SATA II hard drives.
• RAID supported in MS4B (RAID 0) and MS4UM (software RAID 0, 1,
0+1, 5, 5 + spare in Windows).
• OS independent with plug and play capability.
Other Sans Digital Products
MS1UT
MS2UT+/MS2UTN+
MS2U+/MS2T+
MS4B/MS4T/MS4UM
AN2L
ACCUNAS
1) Insert the AN2L CD-ROM.
- For MAC users install MacWizard.dmg, and
then run Quick Install Wizard.
- For PC users, install SD Finder to continue.
2) After the installation, SD Finder will run
automatically.
Note: If using Windows XP SP2, please
click “unblock” to continue.
MS1UT
Printer
Computer Rear Panel
PC / MAC
GigaLAN
Network Switch Rear Panel
K
DC12V
RESET
LAN
USB
System Configuration (Continued)
3) SD Finder will auto detect the AN2L on the
network. Click “Yes” to continue. 4) Type in the administration password.
Follow the on-screen instructions to
complete the configuration. Please wait
until all changes are applied.
Note: RAID configuration may take more
than 20 minutes depending on the size of
the hard drives.
5) The AN2L unit will restart after the installation
is complete. 6) Click Finish to finalize the setup.
7) Windows only: AN2L provides several default
folders for sharing and access. Please select
the share folder you would like to map on
your computer.
8) You could now connect to the
administration page to setup the user,
share folders and other network settings.
Quick Installation Guide
Install AN2L Finder
Install NetBak Replicator
Install QGet
User Manual and Application Notes
Browse CD
Product Support and Registration Website
Back Exit
AN2L
AN2L
AN2L
System Default Settings: Network Setting: DHCP Username: admin Password: admin
Package Contents
AN2L ................................................................................................
Power Adapter ...............................................................................
CD / Manual ...................................................................................
Screws .......................................................................................
Ethernet Cable ...............................................................................
(Please contact us in case of missing or damaged items)
Step 1
Installing Hard Drives
Included
1
1
1
1 SET
1
Hardware Diagrams
QUICKINSTALLATIONGUIDE v1.0
AN2L
ACCUNAS
IDE
K
DC12V
RESET
LAN
USB
STATUS
HDD1
HDD2
LAN
POWER
STATUS
HDD1
HDD2
LAN
POWER
USB 2.0 PORT
COOLING FAN
ETHERNET
POWER SUPPLY
USB 2.0 PORT
COPY BUTTON
POWER BUTTON
Unscrew the screws on the back panel, and
open the unit by sliding the larger side panel
forward.
Step 2
Install the first hard drive by placing it in the
hard drive cradle, and sliding it forward to lock
it into the connector.
Step 3
Install the second hard drive by placing it on
top of the first hard drive, and securing the
screws on the sides of both hard drives.
Step 4
Connect the data cable and SATA power
cable as shown in the diagram below, and
slide the case back in place and tighten the
screws on the back panel.
LED INDICATORS:
USB, STATUS, HDD1,
HDD2, NETWORK,
POWER
POWER CABLE
DATA CABLE
Page 1 Page 2Cover
Page 4 Page 5Page 3
