sanus accents SAN18B User manual
Milestone AV Technologies
6436 City West Parkway
Eden Prairie, MN 55344 USA
Customer Service
Asia Pacific: 86 755 8996 9226 • sanus.ap@milestone.com
accents.sanus.com
©2012 Milestone AV Technologies, a Duchossois Group Company.
All rights reserved. Accents is a Milestone brand.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
SAN18B Instruction Manual
(6904-002028 <01>)
Scan here to view
product demo and install
videos or visit san.us/111
6904-002028 <01>
2
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Specications
ÙWeight capacity-DO NOT EXCEED: 22.6 kg (50 lb) includes TV and any accessories
ÙTilt: ±12°
CAUTION: Avoid potential personal injuries and property damage!
ÙDo not use thisproduct for any purpose not explicitly specied by manufacturer.
ÙThewall must becapableof supporting vetimes theweight of themonitor and mount combined.
ÙThisproduct isdesigned for use in wood framewallsonly!
ÙIf you do not understand these instructions, or havedoubtsabout thesafety of theinstallation, assembly or use of this
product, contact Customer Serviceor call a qualied contractor.
ÙManufacturer isnot responsiblefor damageor injury caused by incorrect assembly or use.
Technical Specications
7.87
200.0
8.87
225.4
2.11
53.6
7.87
200.0
3.94
100.0
7.00
177.8
3.94
100.0
8.69
220.7
4.75
120.7
2.95
75.0
2.95
75.0
1.38
35.0
12°
12°
2.13
54.1
in.
mm
Required Tools
3mm
(1/8 in.)
12mm
(7/16 in.)
6904-002028 <01> 3
WARNING: This product
contains small items that could be a
choking hazard if swallowed.
Beforestarting assembly, verify all
partsareincluded and undamaged.If
any partsaremissing or damaged, do
not return thedamaged item to your
dealer; contact Customer Service.
Never use damaged parts!
NOTE: M4, M6, or M8 describes the
diameter, mm describes thelength of
screwsthat arelabeled M# X ##mm.
Not all hardwareincluded will beused.
[01] x 1
[02] x 1
[03] x 2
[04] x 2
[05] x 4[06] x 4
[07] x 4[08] x 4
[09] x 4[10] x 4[11] x 4
[12] x 4[13] x 4
[14] x 4[15] x 4[17] x 4[16] x 8
1/4 x 2.5 in.
M6 x 14mmM6
M4 M6/M8M4 M6/M8
M8 x 16mm M8 x 35mm
M6 x 12mm M6 x 20mm M6 x 35mm
M4 x 12mm M4 x 30mm
Supplied Parts and Hardware
12
¼x 2½in.
6904-002028 <01>
4
Before You Begin - Determine TV Hole Pattern
200 x 200 mm TV hole pattern
[01]
[05]
[06]
[03]
200mm
200mm
100mm
75mm
100mm
200mm
75mm
Install bracket extensions[03] ONLY if your TV hasa
200 x 200 mm (7⁄ x 7⁄ in.) holepattern.
6904-002028 <01> 5
M4/M6/M8
1-2 Attach bracket to a TV with a at back
[07, 09, 10, 12]
[07]
[16, 17]
Ensurethebracket islevel on theback of theTV.
NOTE: If theholepattern on your TV is75mm x 75mm the
washers[16, 17] will not beused.
If you requireadditional spacefor cables, recesses, or
protrusions, choose conguration B.
[01]
[01]
[01]
Your TV type will helpyou determinewhich hardware
conguration to use.
A. Installation option without spacers(TVswith at backs)
B. Installation option using spacers(TVswith irregular
backs)
Hand thread screwsinto thethreaded insertson theback of
your TV to determinethecorrect screw diameter (M4, M6, or
M8).
CAUTION: Avoid potential personal injuries and property
damage! Verify that thereareadequatethreadsto securethe
bracketsto themonitor.If you encounter resistance, stop
immediately and contact customer service. Use theshortest
screw and spacer combination to accommodateyour needs.
Using hardwarethat istoo long may damageyour TV.
B
1-1 Select the hardware diameter and length
A
1 Select TV Hardware and Mount TV Bracket
75mm x 75mm
A
6904-002028 <01>
6
M4 M6/M8
1-2 Attach bracket to a TV with an irregular back
[08]
[11, 13]
[14]
[14]
[15]
[17]
[01]
[01]
[01]
[01]
[16]
[08]
[16]
Ensurethebracket islevel on theback of theTV.
Standard congurationsareshown.
NOTE: If theholepattern on your TV is75mm x 75mm
thewashers[16,17] will not beused.
For special applications, or if you areuncertain about
your hardwareselection, contact Customer Service.
75mm x 75mm
B
6904-002028 <01> 7
[02]
[02]
< 16 mm
(5/8 in.)
2 Mount the Wall Plate
2-1 Locate stud
2-2 Mark the wall Level thewall plate[02] and mark theholelocations.
2-3 Drill pilot holes
2-4 Tighten lag bolts [04]
CAUTION:
Avoid potential injuries or property damage!
Improperuse could reducetheholding powerof thelag bolt.To avoid
potential injuries or property damage
ÙDO NOT over-tighten thelag bolts[04].
ÙTighten thelag bolts[04] only until they arepulled rmly against
thewall plate[02].
[04]
3 mm
(1/8 in.)
12 mm
(7/16 in.)
Verify thecenter of thestud using an awl, a thin nail, or an edgeto
edgestud nder.
CAUTION: Avoid potential personal injuries and property
damage!
ÙAny material covering thewall must not exceed 16 mm (5/8 in.).
ÙMinimum wood stud size: common 51 x 102 mm (2x 4 in.)
(nominal 38 x 89 mm (1½ x 3½ in.)).
CAUTION:
Avoid potential injuries or property damage! Pilot
holes MUST bedrilled to a depth of 63½ mm (2½in.), using a 3 mm
(⁄ in.) diameter drill bit.
63½ mm
(2½ in.)
6904-002028 <01>
8
[02]
[01]
3 Hang the TV onto the Wall Plate
ÙFor tilting see option A
ÙFor low prolesee option B
HEAVY! You will need assistance with this step.
A
34.92 mm
(1⁄ in.)
[01]
[02]
B
6904-002028 <01> 9
4 Secure the TV to the Wall Plate
SecuretheTV to thewall plateusing thelocking tab (T).
NOTE: If you need to removetheTV from thewall plate,
unsecurethelocking tab (T).
(T)
6904-002028 <01>
10
5 Adjust Up / Down Tilt Tension
± 12°
MilestoneAV Technologies and itsaliated corporationsand subsidiaries (collectively, “Milestone”), intend to makethismanual accurateand complete. However, Milestonemakes no claim that theinformation
contained herein coversall details, conditions, or variations. Nor does it providefor every possiblecontingency in connection with theinstallation or use of thisproduct.Theinformation contained in this
document issubject to changewithout noticeor obligation of any kind.Milestonemakes no representation of warranty, expressed or implied, regarding theinformation contained herein.Milestoneassumes no
responsibility for accuracy, completeness or suciency of theinformation contained in thisdocument.
Loosen thetilt tension nut to adjust thetilt of your TV.Tighten
thetilt tension nut when your TV isset to thedesired tilt.
Table of contents
Other sanus accents TV Mount manuals
