Sanyo VA-LANC100 User manual

INSTRUCTION MANUAL VA-LANC100
Digital Recording Camera LAN Kit English GB
L9EAA/WA (VA-LANC100) GB 2001, 9, 27
All manuals and user guides at all-guides.com
all-guides.com

CONTENTS
INTRODUCTION..........................................1
INCLUDED ITEMS .......................................1
LAN KIT SETUP ...........................................2
Setup Instructions....................................... 2
MENU SETUP AFTER FIRMWARE
UPDATE.......................................................
Flow of Setup Windows.............................
HARD DISK CAPACITY SETTINGS
(HDD SET) ................................................... 6
About FAT 32 .............................................. 6
Initializing the Hard Disk ........................... 6
Changing Alarm Capacity .......................... 7
PC CONTROL SETUP
(PC CONTROL SET) ..................................... 8
Set the recording speed............................. 8
Choose the network settings .................... 9
ASet the IP Address, Subnet Mask and
Gateway ..................................................... 9
BSet the User ID (up to characters) ...... 10
CSet the Password
(up to 8 characters) ................................. 11
Changing Set Entries................................ 13
INTRODUCTION
This product is a local area network (LAN)
connection kit for linking a Sanyo digital recording
camera to a computer network. It includes a
hardware adapter and a C -ROM with both
updating software for the camera and an
application program for the computer.
By updating the camera firmware and establishing
the network, your existing computer will have extra
capabilities for backup recording, displaying a live
action window on your monitor and for remotely
controlling the camera’s recording functions.
Because the system uses the FAT 32 file system
data storage structure, data from the camera’s hard
disk can be read like a removable disk when linked
to the computer with a USB connection. Hard disk
capacity can be up to 137GB.
For instruction on controlling the camera from a
remote computer, see the manual titled igital
Recording Camera Utility Software 1.6.
INCLUDED ITEMS
1CompactFlash Ethernet Card
2Application Software CD-ROM
L9EAA/WA (VA-LANC100) GB 2001, 9, 27
1 English
All manuals and user guides at all-guides.com

LAN KIT SETUP
Setup Instructions
Please follow the steps below to use the digital recording camera on a network.
1 USB Driver and Software Installation
Use the included C -ROM for installing the USB driver and software onto the computer to be connected. For
installation steps, see the manual titled igital Recording Camera Utility Software 1.6.
2 Firmware Upload
Use the included C -ROM to replace the firmware (permanent software) in the camera.
1Insert the CD-ROM into the computer’s CD-ROM drive.
2Turn on the camera, then connect the USB cable between the computer and the camera.
3From the Windows Start menu, choose Run.
4Type in “D:Uploader.exe”.
(“D” indicates the computer’s C -ROM drive. If the drive is different, please enter the correct drive
letter.)
Click the OK button.
The “SANYO Firmware Uploader” window will appear.
6Click the Upload button.
The “Open” window will appear.
7Make sure the overwriting software file
SX19X76r.bin is selected, then press the
Open button.
The “Upload” window will appear.
L9EAA/WA (VA-LANC100) GB 2001, 9, 27
English 2
All manuals and user guides at all-guides.com

LAN KIT SETUP
8Click the Yes button.
Overwriting of the firmware will start.
9After the firmware overwriting action has
been completed, turn off the camera’s
power.
3 PC Control Setup
The four setting adjustments listed below must be made directly on the camera with the camera’s menu
before the camera can be used on a network. These setting adjustments must be made before installing the
LAN adapter. For details, see “PC CONTROL SETUP (PC CONTROL SET)”. (☞ P. 8)
SET THE RECORDING SPEED (RECORDING SPEED SET)
CHOOSE THE NETWORK SETTINGS (NETWORK SET)
4 LAN Kit Installation
The following explains how to install the LAN kit and connect the network.
Use an Ethernet cable for the network cable.
Note: Make sure the camera power is Off before installing the LAN kit.
1Use a screwdriver to remove the set screw
A, then slide the operation panel cover to
the left and remove it.
The removed cover is not used when the LAN
kit is in place.
A
L9EAA/WA (VA-LANC100) GB 2001, 9, 27
3 English
All manuals and user guides at all-guides.com

LAN KIT SETUP
2Insert the LAN card B into the camera’s
expansion slot.
Insert the LAN card so that the direction
arrow is on the top side and pointing in.
3Slip the 2 retaining tabs C on the right
side of the LAN kit into place on the
camera body, then insert the adapter’s
cable D into the opening in the LAN card
while pulling the adapter down into place
against the side of the camera.
4Secure the LAN kit into place with the set
screw E.
Connect the network cable F to the LAN
kit.
6Connect the other end of the network
cable to your Ethernet hub.
B
C
D
1
2
E
F
L9EAA/WA (VA-LANC100) GB 2001, 9, 27
English 4
All manuals and user guides at all-guides.com