Sanyo FW50C36F User manual

Owner's manual
LCD TV
(LED BACKLIGHT)
Manual del propietario
ES
FR Manuel du propriétaire
Need help? Please call toll free 1 866 212 0436 or visit our web site above:
To obtain a more detailed electronic copy of this
manual or much further contents, go to
Para obtener una copia electronica detallada de este manual o
mucho mayor contenido, visite
ES
¿Necesita ayuda? Llame por favor sin costo al 1 866 212 0436 ó visite nuestro
sitio web en:
ES
Besoin d’aide? Appelez notre numéro gratuit à 1 866 212 0436 ou visitez notre
site web à l’adresse:
FR
FR Pour obtenir une copie electronique plus detaillee de ce manuel ou
pour aller encore plus loin, visitez
www.sanyo-av.com
FW50C36F

Contents
1 Notice ............................................................................. 5
2 Getting started ........................................................... 8
Features 8
Supplied accessories 8
Symbols used in this Owner’s manual 8
Attaching the base 9
Installing the remote control batteries 9
Remote control 10
Control panel 11
Terminals 11
Connecting Antenna or Cable / Satellite / IPTV set-top box 12
Plugging in the AC power cord 12
Selecting your connection quality 13
Connecting your devices 13
Initial setup 17
3 Use your TV .............................................................. 19
Switching on your TV and putting it in standby mode 19
Adjusting volume 19
Switching channels 19
Watching channels from an external device 20
Access the Home menu 20
Create a list of favorite channels 21
Changing Pix shape 21
TV screen information 22
Using options menu 23
USB 24
4 Getting more from your TV ............................... 27
Picture setup 28
TV settings 28
Picture 28
Sound 30
Features 31
Installation 31
Accessibility 33
Search for channels 35
Install channels 35
Channel settings 35
Channel installation 36
Child lock 36
Change PIN 38
Digital audio language 38
Mono/Stereo 38
Connect to network 38
Wireless setting 39
Wired setting 39
Network settings 39
Manual network settings 39
Connection test 42
Setting status 42
Home network 42
Wake-on-LAN(DIAL) 42
Apps 42
Samba interactive TV settings 43
Reset network settings 43
Update software 43
Preparing for the software upgrade 43
Downloading the software 43
USB upgrade 44
Network updates 44
Software settings 45
Software 45
View photos, play music and watch videos using home
network 45
Apps 48
PandoraN operations 49
5Useful tips .................................................................. 50
FAQ 50
Troubleshooting tips 51
6 Information ................................................................ 53
Glossary 53
Maintenance 53
7 Specifications ........................................................... 54
8 Warranty ..................................................................... 55
License ................................................................. end of book
●Displays and illustrations may differ depending on the product you purchase.
2.English

Know these safety symbols The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
apparatus’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the apparatus.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The caution marking is located on the rear or bottom of the cabinet.
CAUTION
Register online today at sanyo-av.com/support/ today
to get the most benefits from your purchase.
Registering your model with SANYO makes you eligible for all of the valuable benefits such as software
upgrades and important product notifications.
Register Online at sanyo-av.com/support/
Visit our World Wide Web Site at sanyo-av.com/support/
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’au fond.
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer
electronics industry are committed to making home
entertainment safe and enjoyable.
• As you enjoy your television, please note that all
televisions – new and old- must be supported on proper
stands or installed according to the manufacturer’s
recommendations. Televisions that are inappropriately
situated on dressers, bookcases, shelves, desks,
speakers, chests, carts, etc., may fall over, resulting in
injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations
for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use
of your television.
• NEVER allow children to climb on or play on the
television or the furniture on which the television is
placed.
• NEVER place the television on furniture that can easily
be used as steps, such as a chest of drawers.
• ALWAYS install the television where it cannot be
pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the
television so that they cannot be tripped over, pulled or
grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
• ALWAYS contact your retailer about professional
installation if you have any doubts about your ability to
safely mount your television.
• ALWAYS use a mount that has been recommended by
the television manufacturer and has a safety
certification by an independent laboratory (such as UL,
CSA, ETL).
• ALWAYS follow all instructions supplied by the
television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you
are mounting the television is appropriate. Some
mounts are not designed to be mounted to walls and
ceilings with steel studs or cinder block construction. If
you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is
required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE
IN YOUR HOME
• Many new television buyers move their older CRT
televisions into a secondary room after the purchase of
a flat-panel television. Special care should be made in
the placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture
that is sturdy and appropriate for its size and weight.
• NEVER place your older CRT television on a dresser
where children may be tempted to use the drawers to
climb.
• ALWAYS make sure your older CRT television does
not hang over the edge of your furniture.
CTA.tech/safety
3.English

Important safety instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments / accessories specified by the
manufacturer.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart /
apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
13.
14.
Note to the CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
Example of antenna grounding as per NEC -
National Electric Code
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC ART 250,
PART H)
GROUND CLAMPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Wall mount bracket kit
Brand Model # Screw dimension
FW50C36F SANUS
VuePoint F80b M6 x 0.472” (12mm)
●Your TV meets the VESA standard for wall mounting. Consult with
your local dealer for a wall mount bracket which is compatible with
your TV model.
●The recommended wall mount bracket kit (sold separately) allows the
mounting of the TV on the wall.
●For detailed information on installing the wall mount, refer to the wall
mount Instruction book.
●Funai Corporation is not responsible for any damage to the product
or injury to yourself or others if you elect to install the TV wall mount
bracket or mount the TV onto the bracket on your own.
●The wall mount bracket must be installed by experts.
Funai Corporation is not liable for these types of accidents or
injuries noted below.
●Install the wall mount bracket on a sturdy vertical wall.
●If installed onto a ceiling or slanted wall, the TV and wall mount
bracket may fall which could result in a severe injury.
●Do not use screws that are longer or shorter than their specified
length. If screws too long are used this may cause mechanical or
electrical damage inside the TV set. If screws too short are used this
may cause the TV set to fall.
●Do not fasten the screws by excessive force. This may damage the
product or cause the product to fall, leading to an injury.
●For safety reasons use 2 people to mount the TV onto a wall mounting
bracket.
●Do not mount the TV onto the wall mounting bracket while your TV
is plugged in or turned on. It may result in an electrical shock injury.
When installing the unit on the wall, allow this much space.
Top :11.8 inches (30cm)
Left and right side :5.9 inches (15cm)
Bottom :3.9 inches (10cm)
4.English

1 Notice
SANYO is a registered trademark of SANYO Electric Co., Ltd. and is used
by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license from
SANYO Electric Co., Ltd.
Any liability related to SANYO products, including design and quality, is
the soleresponsibility of Funai Electric Co., Ltd. and Funai Corporation,
Inc.
Please contact Funai Corporation, Inc. for any questions or claims related
to SANYO products: www.sanyo-av.com
Funai Corporation reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly.
The material in this Owner’s manual is believed adequate for the
intended use of the system. If the product or its individual modulesor
procedures are used for purposes other than those specified herein,
confirmation of their validity and suitabilitymust be obtained. Funai
Corporation warrants that the material itself does not infringe any United
States patents. No furtherwarranty is expressed or implied.
Funai Corporation cannot be held responsible neither for any errors in the
content of this document nor for any problems as a result of the content
in this document. Errors reported to Funai Corporationwill be adapted
and published on the Funai Corporation supportwebsite as soon as
possible.
Pixelcharacteristics
ThisLCD product has a high number of color pixels. Although it has
effective pixels of 99.999%or more, black dots or brightpoints oflight
(red, green or blue) may appear constantlyon the screen. Thisis a
structural property of the display (within common industry standards) and
is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove covers to
the inside of the product. Repairs may only be doneby service centers
and official repair shops. Failure to do so shall void any warranty, stated
or implied.
Anyoperation expressly prohibited in this Owner’smanual, any
adjustments or assembly procedures not recommended or authorized
in this Owner’s manual shall void the warranty.
Federalcommunicationscommissionnotice
This equipmenthasbeentestedandfoundtocomply withthelimits
foraClassBdigitaldevice,pursuanttopart15oftheFCCRules.
Theselimitsaredesignedtoprovidereasonableprotectionagainst
harmfulinterferenceinaresidentialinstallation.Thisequipment
generates,usesandcanradiateradiofrequencyenergyand,ifnot
installedandusedinaccordancewiththeinstructions,maycause
harmful interference toradiocommunications. However, thereisno
guarantee thatinterference willnotoccurinaparticular installation.
Ifthisequipmentdoescauseharmfulinterferencetoradioor
televisionreception,whichcanbedeterminedbyturningthe
equipmentoffandon,theuserisencouragedtotrytocorrectthe
interferencebyoneormoreofthefollowingmeasures:
●Reorient orrelocate the receiving antenna.
●Increase the separation between the equipment and the receiver.
●Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
●Consultthedealer or an experienced radio ortelevision technician for
help.
Declarationofconformity
Tradename: SANYO
Responsibleparty : FunaiCorporation,Inc.
Model: FW50C36F
Address : 12489LakelandRoad,SantaFeSprings,
CA90670,USA*
Telephonenumber : 18662120436
*This is not the mailing address for Open Source Software or Customer
service.
Modifications
This apparatus may generate or use radio frequency energy. Changes or
modificationsto this apparatus may cause harmful interference.
Anymodifications to the apparatus must be approved by Funai
Corporation.
The user could lose the authority to operate this apparatus if an
unauthorized change or modification ismade.
Cables
Connections tothis device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and regulations.
Canadiannotice
CANICES-3(B)/NMB-3(B)
Analoganddigitaltelevisionreceivingapparatus,CanadaBETS-7/
NTMR-7.
ThefollowingFCC/ICRSSappliestothewirelessLAN
adapterincludedinthisproduct.
FCCcaution:Anychangesormodificationsnotexpressly
approvedbythepartyresponsibleforcompliancecouldvoid
theuserʼsauthoritytooperatethisequipment.
Thistransmitter must not be co-located or operating in conjunction
with any other antennaor transmitter.
Countrycodestatement
For product available in the USAmarket, only channel 1~11 can be
operated. Selection of other channels isnotpossible.
To maintain compliance with FCCRF exposure requirements, use
only belt-clips, holsters or similar accessoriesthat do not contain
metallic components in its assembly. The use of accessories that do
not satisfy these requirements may not complywith FCC RF
exposure requirements and should be avoided.
This device complies with Part 15 of FCC Rules and Industry
Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this
device.
5.English

Positioning the TV
●Large screen TVs are heavy. 2 people are required to carry and handle
a large screen TV.
●Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
●Install the unit in a horizontal and stable
position.
●Do not install the unit in direct sunlight or in a
place subject to dust or strong vibration.
●Depending on the environment, the
temperature of this unit may increase slightly.
This is not a malfunction.
●Avoid a place with drastic temperature changes.
●Do not place anything directly on top or bottom of the Unit.
●Depending on your external devices, noise or disturbance of the picture
and / or sound may be generated if the unit is placed too close to them.
In this case, please ensure enough space between the external devices
and the unit.
●Do not insert the AC power cord into the power socket outlet before
all the connections are made.
●Ensure that you always have easy access to the AC power cord and
outlet to disconnect the TV from the AC outlet.
●Before you move the TV, disconnect attached cables to prevent
damage to connectors, especially the TV tuner.
●Be sure to unplug the AC power plug from the AC outlet before moving
or carrying the unit.
●When moving the TV and then setting it down, please be careful not
to pinch the AC power cord under the unit.
●Do not place this unit in an area where it may be exposed to water, oil
or grease such as:
near a bathtub, basin, kitchen sink, washing tub, swimming pool,
kitchen exhaust fan, etc., or in a damp basement.
Regulatory notices
Do not place the unit on the furniture that is capable of being tilted by a
child and an adult leaning, pulling, standing or climbing on it. A falling unit
can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided. Make sure to
leave a space of 4 inches (10 cm) or more around this apparatus.
Press B to turn the unit on and go into standby mode. To completely turn
off the unit, you must unplug the AC power plug from the AC power
outlet.
Disconnect the AC power plug to shut the unit off when trouble is found
or not in use. The AC plug shall remain readily available.
AC power plug
Never use a gas duster on this TV.
The gas trapped inside of this unit may cause ignition and explosion.
CAUTION :Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING :Batteries (battery pack or battery installed) should not be
exposed to excessive heat such as sunshine, fire or the
like.
WARNING :To prevent injury, this apparatus must be securely
attached to the furniture / wall in accordance with the
instructions. Tipping, shaking or rocking the unit may
cause injury / death.
Environmental care
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle the
packaging.
For product recycling information, please visit - sanyo-av.com
Click on
End of life directives
SANYO pays a lot of attention to produce environmental-friendly
products in green focal areas. Your new TV contains materials which can
be recycled and reused. At the end of its life, specialized companies can
dismantle the discarded TV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
#Batteries usage
●Do not mix old and new batteries.
●Do not mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, Li-ion, etc.) batteries.
Disposal of used batteries
The batteries supplied do not contain the heavy metals mercury and
cadmium, however in certain localities, disposing batteries with
household waste is not permitted. Please ensure you dispose of
batteries according to local regulations.
Preparing to move / ship the unit
Please pack the unit properly by following the diagram on the carton (as
noted below).
●To avoid damage to the screen, do not pack the stand on the same
side as the TV screen, refer to the illustration above.
6.English

Copyright
All other registered and unregistered trademarks are the property of their
respective owners.
The terms HDMI and HDMI High-
Definition Multimedia Interface, and
the HDMI Logo are trademarks or
registered trademarks of HDMI
Licensing Administrator, Inc. in the
United States and other countries.
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
ENERGY STAR® is a joint program of
the U.S. Environmental Protection
Agency and the U.S. Department of
Energy helping us all save money and
protect the environment through
energy efficient products and
practices.
Consumer notice:
This TV has been set to maximize energy efficiency while delivering the
best possible picture using the factory installed home mode settings.
Changing or enabling other features in this TV (e.g. brightened
backlighting) will possibly increase energy consumption beyond the
original ENERGY STAR® qualified limits.
Netflix is available in certain countries.
Streaming membership required.
More information at www.netflix.com.
VUDU™ is a trademark of VUDU, Inc.
YouTube and the YouTube logo are
trademarks of Google Inc.
PANDORA, the PANDORA logo, and
the Pandora trade dress are
trademarks or registered trademarks
of Pandora Media, Inc. Used with
permission.
Hotlist, Samba, Samba TV and
associated logos are trademarks of
Free Stream Media Corp.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television
viewing for children younger than two years of age.
Funai Corporation Inc. does not warrant access to the portal or to
any of the services, content, software and advertising. Funai
Corporation Inc. may, in its sole discretion, add or remove access to
any specific services, content, software and advertising at any time.
Although Funai Corporation Inc. will strive to provide a good
selection of services, content or software, Funai Corporation Inc.
does not warrant continued access to any specific services, and
content or software.
© 2016 Funai Electric Co., Ltd. All rights reserved.
No part of this Owner’s manual may be reproduced, transmitted,
disseminated or transcribed, in any form or for any purpose without the
express prior written consent of Funai Corporation. Furthermore, any
unauthorized commercial distribution of this Owner’s manual or any
revision hereto is strictly prohibited.
7.English

2 Getting started
Features
●DTV / Analog TV / CATV
You can use your remote control to select channels which are broadcast in digital format and
conventional analog format. Also, cable and satellite subscribers can access their TV
channels.
●Information display
You can display on the TV screen the title, contents (DTV only) and other information on the
current program.
●Autoprogram
This unit automatically scans and memorizes channels available in your area, eliminating
difficult setup procedures.
●Apps
This unit lets you enjoy internet services. Use the remote control to browse the Apps pages.
You can play movies and much more, all from your TV screen.
●Child lock
This feature allows you to block children’s access to inappropriate programs.
●Closed caption decoder
Built-in closed caption decoder displays text for closed caption supported programs.
●MTS / SAP tuner
Audio can be selected from the remote control.
●Auto standby
If there is no input signal and no operation for 15 minutes, the unit will go into standby mode
automatically.
●Sleep timer
You can set the unit to go into standby mode after a specific amount of time.
●Choices for on-screen language
Select your on-screen language: English, Spanish or French.
●Stereo sound function
●PLL frequency synthesized tuning
Provides free and easy channel selection and lets you tune directly to any channel using the
number and decimal point “•” keys on the remote control.
●Various adjustments for picture and sound
Customizes picture quality suitable for your room and sets your sound preference.
●HDMI-CEC via HDMI link
HDMI-CEC allows your other HDMI link devices to be controlled by the HDMI cable connected
to your TV.
●HDMI input
●HDMI-DVI input
If your video device has a DVI output jack, use an HDMI-DVI conversion cable to connect the
unit.
●Component video input
●AV input
Audio and video input from an external device.
●USB terminal
The picture, music and video files stored on a USB memory stick can be played back on this
unit.
●Digital audio output
●Headphone audio output
Headphone 3.5mm stereo jack for personal listening.
Supplied accessories
FW50C36F
AAA
AAA
4
SizeQuantityModel
Screws packed with this unit.
TV base and Screws
Quick start guide
(AAA, 1.5V x 2)
Remote control
and Batteries
Owner’s manual
M4 x 0.787”(20mm)
Note(s)
●If you lose the screws, please purchase the above-mentioned Phillips head screws at your
local store.
●If you need to replace these accessories, please refer to the part name or No. with the
illustrations and call our toll free customer support line found on the cover of this Owner’s
manual.
When using a universal remote control to operate this unit.
●Make sure the component code on your universal remote control is set to our brand. Refer
to the instruction book accompanying your remote control for more details.
●We do not guarantee 100% interoperability with all universal remote controls.
Symbols used in this Owner’s manual
The following is the description for the symbols used in this Owner’s
manual. Description refers to:
Digital TV operation
Cable / NTSC (Analog) TV operation
●If neither symbol appears, the operation is applicable to both.
8.English
Continued on next page.

Attaching the base
You must attach the base to the unit to have it as a table top unit.
Be sure the front and rear of the base match the proper direction. For
large screen TVs, at least 2 people are required for these steps.
1
× 4
2
1
3
2
Note(s)
●Make sure to use a table which can support the weight of this unit and is larger than this
unit.
●Make sure the table is in a stable location.
●A Phillips-head screwdriver is required to fasten the stands to the TV set.
●When attaching the base, ensure that all screws are tightly fastened. If the base is not
properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the
unit.
●To remove the base from this unit, unscrew the Phillips-head screws by reversing the
procedure. Be careful not to drop the base when you remove it.
Installing the remote control batteries
1Slide the battery cover off the back of the remote control.
2Insert the two supplied batteries (AAA, 1.5V). Be sure the + and –
ends of the batteries line up with the markings inside the case.
3Slide the cover back into position.
Note(s)
●Remove the batteries if not using the remote control for an extended period of time.
9.English
Continued on next page.

Remote control
c
a
b
d
f
g
e
j
h
l
k
m
o
q
n
i
p
aB(POWER)
Turns the TV on from standby or off to standby mode.
bSAP
Selects audio mode (MONO / STEREO / SAP) / audio language.
c0 - 9 (NUMBER keys)
Used to enter a channel / program number.
• (DOT) :Use with 0-9 to select digital channels.
For example, to enter 2.1, press
PREV.CH :Returns to the previously viewed channel.
CH + / – :Selects a channel in the memorized channel ring
(low to high or high to low).
dVOL + / –
Adjusts the volume.
eD(MUTE)
Turns the sound on and off.
fBACK
Returns to the previous menu operation.
gH I J K(NAVIGATION keys) / OK
Moves the cursor, selects the on-screen menu items.
hSOURCE
Selects connected devices.
iCC
Selects closed caption settings (Off, On, CC w/ mute).
jPIX SHAPE A
Adjusts the picture size on the TV screen.
kINFO
Displays information about the current program.
lfun-Link keys
H/ G:Skips backward or forward chapters, titles or tracks
on a disc.
E/ D:Searches backward or forward through the disc.
OPTIONS :Displays a list of menu items applicable to the
highlighted object or screen.
C(Stop) :Stops the disc playback.
t(Pause) :Pauses the disc playback.
K(Play) :Begins or restarts the disc playback.
Note(s)
●You must set on in the device ( Lp. 32) and HDMI-CEC Control ( Lp. 23) menu's to
operate the above functions.
●Pause may not work properly on some devices even if they are complied with HDMI-CEC.
mCOLOR keys
Use these keys according to the directions on-screen.
nZ (Home)
Opens the main on-screen menu.
oYouTube
Access directly to YouTube.
pNETFLIX
Access directly to Netflix.
qVUDU
Access directly to VUDU.
10 .English
Continued on next page.

Control panel
abcde
g
hf
aVOL J / K
Adjusts the volume. In the menu screen, moves the cursor
left (J) / right (K).
VOL J:Volume down
VOL K:Volume up
bCH H / I
Selects a channel. In the menu screen, moves the cursor
up (H) / down (I).
cMENU
Opens the main on-screen menu.
dSOURCE
Selects connected devices.
eB (POWER)
Turns the TV on or switches the TV into standby mode.
fRemote control sensor
Receives IR signal from remote control.
gPower on / Standby indicator
(On : no light, Standby : lights in red)
hAmbient light sensor
Alters the brightness of the TV screen automatically by detecting
your room lighting level. Do not block this light sensor window which
allows proper operation.
Terminals
m
n
o
p
i
j
k
l
i75 ohm cable / Antenna connection
Signal input from an antenna or cable / satellite set-top boxes.
jAnalog audio (L/R) input jacks
Connect analog audio signals from;
–HDMI-DVI / Analog audio (L/R) jacks signal
–Component video / Analog audio (L/R) jacks signal
–Composite video / Analog audio (L/R) jacks signal
–PC connection / Analog audio (L/R) jacks signal with stereo mini
3.5mm plug audio cable on PC
kDigital audio output jack
Digital audio (S/PDIF) output to home theaters and other digital audio
systems.
lComponent (Y/Pb/Pr) /Composite video (VIDEO) input jack(s) for
VIDEO
Composite video input (VIDEO) jack is a shared jack with component
video input (Y) jack. Green / Yellow color orientation depends on
model.
mHeadphone audio output jack
Headphone 3.5mm stereo jack for personal listening.
nHDMI input jack(s)
Digital audio and video input from high definition digital devices such
as DVD / Blu-ray disc players, cable / satellite set-top boxes, PC’s,
etc.
*For HDMI 1 only
In addition to normal HDMI and HDMI-DVI functionality, it outputs
TV audio to an HDMI-ARC-compliant device, such as a home
theater system.
oEthernet port
For internet connection using an Ethernet cable with an RJ-45
connector.
pUSB terminal
Data input from USB memory stick only.
Do not connect any device to this terminal such as digital camera,
keyboard, mouse, etc.
11 .English
Continued on next page.

Connecting Antenna or Cable / Satellite /
IPTV set-top box
Be sure your antenna or another device is connected properly before
plugging in the AC power cord.
If connecting to an antenna through an RF cable
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
RF cable
RF cable
RF cable
OUT
OUT
OUT
IN
IN
IN
Cable
Cable
Cable
Antenna
Antenna
Antenna
If connecting Cable / Satellite / IPTV set-top box using an RF
cable
If the TV is connected to a cable or set-top box via a coaxial connection,
set the TV to channel 3/4 or the channel specified by the service
provider.
Antenna
IN
IN
IN
Set-top box
RF cable
OUT IN
RF cable
RF cable
RF cable
If connecting Cable / Satellite / IPTV set-top box using an
HDMI cable
If the TV is connected to a cable / satellite set-top box via an HDMI cable,
make sure you select the correct source by using SOURCE.
IN
ININ
HDMI cable
HDMI cable
HDMI cable
RF cable
RF cableRF cable
IN
ININ
OUT
OUTOUT
Set-top box
Set-top box
Set-top box
If connecting Cable / Satellite / IPTV set-top box using
component video input
If the TV is connected to a cable / satellite set-top box via component
video input, make sure you select the correct component video source
by using SOURCE.
Set-top box
Set-top box
Set-top box
IN
IN
IN
RF cable
RF cable
RF cable
OUT
OUT
OUT
Component (Y/Pb/Pr)
video cables
Component (Y/Pb/Pr)
video cables
Component (Y/Pb/Pr)
video cables
IN
IN
IN
OUT
OUT
OUT
Audio (L/R) cables
Audio (L/R) cables
Audio (L/R) cables
IN
IN
IN
Connecting a Cable / Satellite / IPTV set-top box, Blu-
ray disc / DVD recorder via composite connectors and
analog audio
Do not place your recorder too close to the screen because some
recorders can be susceptible to harmful interference from the TV.
RF cable
RF cable
RF cable
OUT
OUT
OUT
IN
IN
IN
Cable
Cable
Cable
IN
IN
IN
RF cable
RF cable
RF cable
OUT
OUT
OUT
Video +
Audio(L/R)
cables
Video +
Audio(L/R)
cables
Video +
Audio(L/R)
cables
Video +
Audio(L/R)
cables
Video +
Audio(L/R)
cables
Video +
Audio(L/R)
cables IN
IN
IN
OUT
OUT
OUT
OUT
OUT
OUT
IN
IN
IN
Satellite
Satellite
Satellite
Cable
Cable
Cable
IN
IN
IN
Blu-ray disc / DVD recorder
Set-top box
Set-top box
Set-top box
Note(s)
●If you have any question about the DTV’s antenna, visit www.antennaweb.org for further
information.
●
Depending on your antenna system, you may need different types of combiners
(mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on these
devices is 2,000MHz or 2GHz.
●For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from
the antenna input jack before moving the unit.
●If you did use an antenna to receive analog TV, it should also work for DTV reception. Outdoor
or attic antennas will be more effective than a set-top box or inside antenna.
●To turn on your reception source easily between antenna and cable, install an antenna
selector.
●If you are not receiving a signal from your cable service, contact the cable provider.
Plugging in the AC power cord
Make sure that the AC power cord must be plugged to an AC outlet after
all the necessary connections are made.
Caution(s)
●Connect the analog audio signal cables from the external device to the analog audio L/R input
jacks.
●If you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier.
Note(s)
●Each time you plug in the AC power cord, no operations will be performed for several
seconds. This is not a malfunction.
12 .English
Continued on next page.

No supplied cables are used with these connections:
●Please purchase the necessary cables at your local store.
Before you connect the AC power cord:
Be sure other devices are connected properly before plugging in the AC
power cord.
Selecting your connection quality
HDMI - Highest quality
Supports high-definition digital signals and gives highest picture and
sound quality. Video and audio signals are combined in one cable. You
must use HDMI for full high-definition video and to enable HDMI-CEC.
Note(s)
●SANYO HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a form
of digital rights management that protects high-definition content in Blu-ray discs or DVDs.
●The HDMI-ARC connector on the TV features HDMI-ARC functionality. This allows output
of TV audio to an HDMI-ARC-compliant device.
Component (Y Pb Pr) - High quality
Supports high-definition analog signals but gives lower picture quality
than HDMI. Component (Y/Pb/Pr) video cables combine red / green / blue
video cables with red / white audio (L/R) cables. Match the cable colors
when you connect to the TV.
Composite - Basic quality
For analog connections. Composite video / Audio analog cable usually
combine a yellow video cable with red / white audio (L/R) cables. With
this unit, yellow cable must be connected to Y (green) jack on the
component video input jacks.
Connecting your devices
HDMI digital connection
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high-definition
digital video and multi-channel digital audio through a single cable.
HD game console
or
Blu-ray disc / DVD player
or
Set-top box
OUT
IN
IN
IN
HDMI cable
HDMI cable
HDMI cable
Note(s)
●Some HDMI cables and devices may not be compatible with the TV due to different HDMI
specifications.
●Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable
is recommended for the better compatibility.
●The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of video signals, 32kHz /
44.1kHz and 48kHz of audio signals.
●This unit accepts LPCM, AC-3, DD+ audio signal.
●This unit accepts only signals in compliance with EIA861.
HDMI-DVI connection
This unit can be connected to a device that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires
audio cable for analog audio signal as well.
OUT
HDMI-DVI
conversion cable
HDMI-DVI
conversion cable
HDMI-DVI
conversion cable
IN
IN
IN
OUT
IN
IN
IN
Audio (L/R) cables
Audio (L/R) cables
Audio (L/R) cables Cable receiver or
set-top box with
the DVI output jack
Note(s)
●Some HDMI cables and devices may not be compatible with the TV due to different HDMI
specifications.
●Some newer HDMI devices may output signals that this TV cannot receive (such as 4K or
HDR). For such devices you will need to change the output of that device to a compatible
signal. Please consult with the manufacturer or the user manual of that device.
●Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable
is recommended for the better compatibility.
●The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
●HDMI-DVI connection requires separate audio connections as well and the audio signals are
output as analog (L/R) audio.
●DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
13 .English
Continued on next page.

HDMI-ARC connection
HDMI-ARC allows you to use HDMI-CEC to output TV audio directly to
a connected audio device, without the need for an additional digital audio
cable.
OUT
HDMI cable
HDMI cable
HDMI cable
HDMI 1 IN only
HDMI 1 IN only
HDMI 1 IN only
Digital home theater
amplifier that supports
HDMI-ARC
Note(s)
●The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output
digital audio to an HDMI home theater system.
●Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to
the device using an HDMI cable attached to HDMI-ARC connectors.
Component analog video connection
Component analog video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit’s component video (Y/Pb/Pr) input jacks,
connect analog audio cables to the analog audio (L/R) input jacks.
Blu-ray disc /
DVD recorder
Blu-ray disc /
DVD recorder
Blu-ray disc /
DVD recorder
or
or
or
Set-top box
Set-top box
Set-top box
OUT
OUT
OUT
Component (Y/Pb/Pr)
video cables
Component (Y/Pb/Pr)
video cables
Component (Y/Pb/Pr)
video cables
IN
IN
IN
OUT
OUT
OUT
Audio (L/R) cables
Audio (L/R) cables
Audio (L/R) cables
IN
IN
IN
Note(s)
●The unit accepts 480i, 480p, 720p, 1080i and 1080p of video signals for this connection.
Composite analog video connection
Composite analog video connection offers standard picture quality for
video devices connected to the unit.
If you connect to the unit’s component / composite video (Y/VIDEO) input
jack (green), connect audio cables to the audio (L/R) input jacks. When
the audio is monaural, then only connect to the audio L input jack.
DVD player
DVD player
DVD player
OUT
OUT
OUT
IN
IN
IN
Video + Audio(L/R)
cables
Video + Audio(L/R)
cables
Video + Audio(L/R)
cables
Note(s)
●With this unit, yellow cable must be connected to Y (green) jack on the component video
input jacks.
●Whenever you connect to the composite video input jack (Y/VIDEO), you must disconnect
the component video input jacks (Pb and Pr). If you leave those jacks connected, it may
cause an unstable picture.
Connecting the TV to the internet using an Ethernet
cable
LAN
Internet
Internet
Internet
Network provisioning
equipment
Network provisioning
equipment
Network provisioning
equipment
Ethernet cable
Ethernet cable
Ethernet cable
Note(s)
●Please purchase shielded Ethernet cables at your local store and use them when you
connect to network equipment.
●After connecting an Ethernet cable, set up necessary network settings. Connect to
network Lp. 38
●Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid damaging
the unit.
●If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
●If your telecommunications equipment (modem, etc.) has broadband router functions but
there is no vacant port, then add a hub.
●For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
●Do not connect your PC directly to the Ethernet port of this unit.
14 .English
Continued on next page.

Connecting theTV to the internet using awireless LAN
WLAN
LAN
Network provisioning
equipment
Ethernet cable
Broadband router
Broadband router
Broadband router
Internet
Internet
Internet
Note(s)
●After you make the wireless connection, set up the necessary network settings. Connect
to network Lp. 38
●Use a wireless LAN Access Point (AP) (e.g. broadband wireless router) which supports
IEEE 802.11 b/g/n. (n is recommended for stable operation of the wireless network.)
●This unit does not support Ad-hoc mode.
●Other radio devices or obstacles may cause interference to the wireless network
connection.
Digital audio output connection
If you connect this unit to an external digital audio device, you can enjoy
multi-channel audio like 5.1ch digital broadcasting sound.
Use a digital audio optical cable to connect the unit to external digital
audio devices.
Digital home theater
amplifier
OUT
OUT
OUT
IN
IN
IN
Digital audio
optical cable
Digital audio
optical cable
Digital audio
optical cable
PC connection
HDMI connection
This unit can be connected to your PC that has an HDMI terminal. Use
an HDMI cable for this digital connection.
PC
PC
PC
OUT
OUT
OUT
HDMI cable
HDMI cable
HDMI cable
IN
IN
IN
HDMI-DVI connection
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this video digital connection and
it requires stereo mini 3.5mm plug audio cable for analog audio signal as
well.
PC
PC
PC
OUT
OUT
OUT
HDMI-DVI
conversion cable
HDMI-DVI
conversion cable
HDMI-DVI
conversion cable
IN
IN
IN
OUT
OUT
OUT
Stereo mini 3.5 mm
plug audio cable
Stereo mini 3.5 mm
plug audio cable
Stereo mini 3.5 mm
plug audio cable
IN
IN
IN
The following PC-input video signals can be displayed:
Format Resolution Refresh rate
VGA 640 x 480
60Hz
SVGA 800 x 600
XGA 1,024 x 768
WXGA 1,280 x 768
1,360 x 768
FHD 1,920 x 1,080 24/30/60Hz
Other formats or non-standard signals will not be displayed correctly.
Note(s)
●Please purchase a HDMI-DVI conversion cable that has a ferrite core.
●The following operations may reduce noise.
–Attach a ferrite core to the AC power cord of your PC.
–Unplug the AC power cord and use the built-in battery of your portable / laptop PC.
●Some HDMI cables and devices may not be compatible with the TV due to different HDMI
specifications.
●Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable
is recommended for the better compatibility.
●The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals only when using the HDMI
connection and HDMI-DVI connection.
●The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
●HDMI-DVI connection requires separate audio connections as well and the audio signals are
output as analog (L/R) audio.
●DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
15 .English
Continued on next page.

USB memory stick
This unit offers easy playback of picture, music and video files.
Insert the USB memory stick into the USB terminal shown below.
For a complete list of file formats and specifications supported, refer to
USB Section Lp. 24
Note(s)
●The unit recognizes only a USB memory stick.
●Do not use a USB hub or an extension cable to connect an external hard disk drive to the
unit. (Not supported.)
●Always insert a USB memory stick directly to this unit.
●A USB memory stick is not supplied with this unit.
●We do not guarantee that all USB memory sticks can be supported by this unit.
●Be sure to keep a backup copy of the original files on your USB device before you play them
back on this unit. We have no responsibilities for damage or loss of your USB stored data.
●To protect your USB memory stick files from being erased place the write protect sliding
tab in the protect position (if available).
●When you are ready to remove a USB memory stick, set the unit to go into standby mode
to avoid any damage to your data and the unit.
●A USB memory stick that requires its own driver or the device with a special system such
as fingerprint recognition are not supported.
●This unit is not allowed to use the USB memory stick which requires an external power
supply (500mA or more).
16 .English
Continued on next page.

These operations are accessible by remote control.
Some may also be accessible by the main unit's control panel.
Initial setup
This section will guide you through the unit’s Initial setting which includes
selecting a language for your on-screen menu, country, location and
Autoprogram, which automatically scans and memorizes viewable
channels. You can also set the network connection in this setting.
Before you begin:
Make sure the unit is connected to an antenna or cable.
1After making all the necessary connections, press B to turn on the
unit.
●It may take a few moments to turn on the unit for the first time.
●Initial setup menu appears automatically after the unit is turned
on.
2Use H I to select the on-screen language, Voice guide, country, TV
placement and location in the middle of the TV screen, then press
OK.
●You must set Home in location setting. Otherwise, Picture and
Sound settings you adjusted will not be memorized after the unit
goes into standby mode.
3Use J K to select Skip or Next on network setup screen.
4Use H I to select Wireless or Wired, then press OK.
12 34 756
Skip
Wired
Wireless
Installation
Select your connection type.
This TV can be connected to your
home network.
Wireless If you have a wireless router, select Wireless to
connect to the internet.
Wired If you connect with an Ethernet cable, select Wired
to connect to the internet.
●If you have a router with easy connect function, select Wireless
and use J K to select Simple Connect, then press OK.
5Follow the on-screen instructions to complete the installation.
●When you select On in the selection screen for Software update
notification, A message will appear later if there is the latest
software on the network server.
6Use H I to select the signal type.
●If the TV is connected to a cable or satellite set-top box, select the
2nd one and skip to step 8.
12 34 756
Installation
Set-top box
Select "Set-top box" to set up a TV
signal from a cable TV box or
satellite TV receiver.
Antenna
Select "Antenna" to set up a TV
signal from a cable TV wall jack or
a standard TV antenna.
7Use H I to select Antenna for TV channels or Cable for CATV
channels, then press OK.
12 34 756
Installation
Skip
Cable
Antenna
Now select either Antenna or
Cable, using up/down key of the
remote control. Once you have
made your selection, press the OK
button to proceed.
Make sure that you have attached
your antenna or cable signal into
the jack on the back of your TV
labeled "ANTENNA IN".
–When Antenna is selected, the TV detects antenna signals. It
searches for DTV and analog TV channels available in your area.
–When Cable is selected, the TV detects signals supplied by
cable. It searches for DTV, analog TV and cable channels
available in your area.
●Auto programming will begin.
0
0
12 34 756
Installation
Stop
Total progress:
Analog channels found:
Digital channels found:
Please wait until you see the Auto
Programming complete message.
Digital channels will take longer
than Analog to find and program.
Auto programming may take more
than 20 minutes to complete.
System searching. Please wait…
17 .English
Continued on next page.

8Use H I to select your preferred picture setting, then press OK.
Sports
Vivid
Please select your preferred picture mode.
Cancel
Natural
Energy consumption in “Standard” is Energy Star compliant.
“Natural” is calibrated to produce a pristine image.
9After Picture setup is completed, a message will appear if there is
the latest software on the network server.
Note(s)
●If you are not receiving a signal from your cable service, contact the cable provider.
●If you press B during Autoprogram, this setup of TV channels will be cancelled.
●The initial Autoprogram function can be executed for either Antenna or Cable only once.
When you change the connection (Antenna / Cable), select Search for channels again. L
p. 35
After an initial setup is completed...
●If you want to scan the channels automatically again.
Search for channels Lp. 35
●If you want to change to another language.
Language Lp. 31
●If you want to change the country setting.
Country Lp. 48
●If you want to change the location setting.
Location Lp. 32
●If you want to change the network setting.
Connect to network Lp. 38
●If you want to restore the picture and sound setting.
Picture setup Lp. 28
18 .English

3 Use your TV
Switching on your TV and putting it in
standby mode
Remote control
TV
To turn the TV on from standby or off to standby
●Press B on the TV or the remote control.
Note(s)
●Energy consumption contributes to air and water pollution. When the AC power cord is
plugged in, your TV consumes energy with a very low standby power consumption.
Adjusting volume
Remote control
TV
To decrease or increase volume
●Press VOL J / K on the TV or press VOL + / – on the remote control.
VOL J (–) : Volume down
VOL K (+) : Volume up
To mute or unmute sound
●Press D on the remote control to mute the sound.
●Press D again or VOL + / – to recover the original sound.
Switching channels
TV
Remote control
To select channels by using CH H/ Ior CH + / –
●Press CH H (up) / I （down) on the TV or press CH +/– on the remote
control.
To select channels by using the NUMBER buttons
Digital TV operation
●For digital channels, press a number followed by a dot “•” and the
corresponding sub channel number.
–When selecting digital channel 11.1
Be sure to press • before entering the subchannel number.
Cable / NTSC (Analog) TV operation
–When selecting cable or analog channel 11
Press PREV.CH to return to the previously viewed channel.
Note(s)
●To select the non-memorized channels, use the NUMBER buttons.
●Channel not available or No signal will appear on the TV screen after the subchannel
broadcast is over.
●Audio only message will appear on the TV screen, when you receive only sound signal.
19 .English
Continued on next page.

Watching channels from an external
device
Switching each input mode can easily switch with the remote control
between TV and external devices when they are connected to the unit.
1Turn on the set-top box or the connected device.
① Press SOURCE and use J K to select the set-top box or the
connected device and wait a few seconds till the picture appears.
USB
HDMI2HDMI1
Watch TV
Video
② Use the remote control of the set-top box or the connected device
to select channels.
Access the Home menu
1Press Z.
Guide to Home menu
SetupSource Home Network Setup
Source Home Network Apps
Watch TV
a Watch TV :Switches back to the TV source if another source
is selected.
b Source :To select connected devices.
c Home Network :Accesses Home network menus.
d Apps :Accesses Apps menus.
e Setup :Accesses menus that allow you to change
picture, sound and other TV settings.
Lock or unlock your device from the Home menu
This section describes how to lock or unlock specified device.
1Press SOURCE on the remote control.
2Use J K to select a device to lock or unlock.
3Press OPTIONS on the remote control.
4Use H I to select Lock or Unlock, then press OK.
●If device lock is unlocked, Lock will be displayed. If device lock is
locked, Unlock will be displayed at the top right of the device
icons.
5Enter your PIN. Change PIN Lp. 38
Changing device type
You can change device icons displayed in the source list.
1Press SOURCE on the remote control.
2Use J K to select the desired device.
3Press red button on the remote control.
4Use H I to select the desired type, then press OK.
To reset the type
●Press OPTIONS on the remote control at step 3, then select Original
icon.
Scan connections
You can rescan TV connections and update the source list.
Before you begin:
You must set On in fun-Link control. Lp. 32
1Press SOURCE on the remote control.
2Use J K to move the cursor to any device.
3Press OPTIONS on the remote control.
4Use H I to select Scan connections, then press OK.
20 .English
Continued on next page.