Sanyo PLV-HD2000 - 7000 Lumens User manual

7000 ANSI LUMENS zREAL 2K FULL HD MULTIMEDIA PROJECTOR
Issued 09/08 © 2008 SANYO
PLV-HD2000
Projects high-resolution images in the 2K x 1K
digital format in full resolution – the
professional projector
NATIVE 2,048 x 1,080 PANELS
The PLV-HD2000 employs three high-precision LCD panels of native 2,048 x 1,080
resolution. They project the high-resolution images in the 2K x1Kdigital cinema format
in full resolution. This precise resolution is teamed with a High Contrast System. This
is an advanced optical system that achieves a high contrast level to project top-quality
images with rich black reproduction, maximizing theexcellence ofthe video signals.
HIGH PERFORMANCE BRIGHTN3ESS
The PLV-HD2000 uses four high-intensity 300-watt UHP lamps to achieve 7,000
lumens of brightness. If a lamp should burn out, a fail-safe design automatically
switches the lamp mode without interruptingthe projection.
HIGH COLOR PURITY OPTICAL SYSTEM
This advanced system improves the color purity of the three primary colors (red, blue,
and green) to deliver an overall color performance that’s ideal for digital cinema. To
this color purity system, SANYO includes a 36-bit color display capability that
reproduces 68,719 million colors to achieve color expression with superb depth and
subtleness.
NEWLY DEVELOPED 12-BIT SIGNAL PROCESSING CIRCUIT
SANYO has developed a 12-bit signal processing circuit, providing full 2-3 pulldown
compatibility, motion adaptive line interpolation and progressive scanning of 1080i
HDTV signals. It helps assure impressive image quality from virtually any source,
including HDTV content. In addition to faithfully reproducing HDTV 1080i, the PLV-
HD2000 accommodates 1080-24p and 1080-25p signals as well.
MOTOR-DRIVEN LENS SHIFT
Double the brightness. This function allows the user to position the image easily
(up/down and left/right) even after the projector is installed. It is especially useful when
aligning images from two stacked units.
MULTI-VERSATILE INTERFACE PLATFORM (MVIP) SYSTEM
The PLV-HD2000 has four slots for accommodating interface boards, which allow the
user to interchange any of the supplied boards with any desired optional board. RS-
232C input and cross-through output terminals are also provided for easy and flexible
system configuration.
Specifications
Resolution Real 2K (2048 x 1080)
Brightness 7000 ANSI Lumens (4-lamp mode)
3500 ANSI Lumens (2-lamp mode)
Uniformity 90% (corner to corner)
LCD Panel System 1.64” TFT polysilicon type w/micro lensx 3
Number of Pixels 6,635,520 (2,211,840 x 3)
Contrast Ratio 1,000:1 (full/on of
f
)
Projection Lens Lens Sold Separately
Image Size Dependent on Lens
A
spect Ratio 17:9
Throw Distance Dependent on Lens
Zoom/Focus Dependent on Lens
Throw Ratio Dependent on Lens
Zoom Ratio Dependent on Lens
Power Lens Shift Up/Down Ratio 8:-1
–
-1:8 or 10:0
–
0:10
Left/Right Ratio 3:2 – 2:3
Digital Keystone Correction No
Projection Lamp 300W UHP x 4
Scanning Frequency H Sync: 15-120kHz, V Sync: 24-120Hz
Dot Clock 230MHz
Color System PAL/PAL-M/PAL-N/SECAM/NTSC/NTSC4.43
Computer Compatibility Real 2K, True HD, UXGA, SXGA, XGA, SVGA, VGA,
MAC
V
oltage 120VAC or 200-240V AC (auto voltage)
BTU Rating 5801
dB Rating 51 dB
A
Power Consumption 1700W
Dimensions (WxHxD) 22.9”x9.9”x30.8”
Net Weight 82 lbs.
User Maintenance Clean air filters, replace lamp assembl
y
Detachable Input Panels
Input 1 (Detachable) Dual SDI Input (HD/SD SDI) / SDI Output
Input 2 (Detachable)
RGBHV & Component (BNC x 5)
•
Left and Right Audio
(RCA x 2)
Input 3 (Detachable) Digital Visual Interface (DVI-I w/HDCP)
•Left & Right Audio (RCA x 2)
Input 4 (Detachable) Open
Fixed Input/Output Panel
Serial in & Serial out (D-Sub 9 x 2)
•
USB (type B)
•
Wired RC jack (Stereo mini)
Included Accessories
Wireless Remote Control
•
AC power cord
•
Real Color
Manager CD-ROM •Lens Mount Adapters (POA-LNA02
& POA-LNA01) •2 “AA” batteries •Light Block Sheets
Owner’s manual
Optional Accessories PO
A
-MD16VDI - 5BNC Board
POA-MD13NET2 - Network Board
POA-MD18DVI - DVI Board(HDCP)
POA-MD03VD2A -Video Y/C & S-Video Input Board
POA-LNA02 - Lens Mount Adapter (LNS-W02/M01/S01)
POA-LNA01 - Lens Mount Adapter (for all other lenses)
610 327 4928– Replacement Lamp
945 086 6402– Replacement Remote
PLC-CSE14 - Hard Shipping Case
Warranty
Three years parts and labor; 90 days initial lamp;
Quick repair program under warranty
Because its products are subject to continuous improvement, SANYO reserves the right to
modify product design and specifications without notice and without incurring any obligations.
Lens Specifications
Type Short
Fixed Short Zoom On-Axis Short Fixed Wide Zoom Wide Zoom Standard Zoom 1 Standard Zoom 2 Semi-Long Zoom Long Fixed Long Zoom Long Zoom
Part No. LNS-W01Z LNS-W02Z LNS-W03 LNS-W04 LNS-W06 LNS-S02Z LNS-S03 LNS-M01Z LNS-T01Z LNS-T02 LNS-T03
Zoom No Yes (power) No Yes (power) Yes (power) Yes (power) Yes (power) Yes (power) NO Yes (power) Yes (power)
Throw Ratio 1.2:1 1.4 – 1.8:1 0.8:1 1.5 – 2.0:1 1.2 – 1.5:1 2.0 – 2.6:1 2.6 – 3.5:1 3.5 – 4.5:1 6.9:1 4.4 – 6.2:1 6.3 – 9.0:1
F Stop 2.5 2.5 – 2.9 2.6 1.7 – 2.3 2.3 – 2.8 2.0 – 2.3 1.7 – 2.6 2.0 – 2.6 2.0 2.0 – 2.9 2.2 – 2.5
Lens Shift 8:1 – 1:8 8:1 – 1:8 1:1 8:1 – 1:8 8:1 – 1:8 10:0 – 0:10 8:1 – 1:8 8:1 – 1:8 8:1 – 1:8 8:1 – 1:8 8:1 – 1:8
Weight 12.6 lbs. 4.9 lbs. 6.8 lbs 6.2 lbs. 6.6 lbs. 4.2 lbs. 8.2 lbs. 4.2 lbs. 8.4 lbs. 6.8 lbs. 16.1 lbs.
21605 Plummer Street
Chatsworth, CA 91311
Ph: 888-337-1215 (toll-free)
Fax [phone]
www.san
y
opro
j
ectors.com
PRESENTATION TECHNOLOGIES