Sapore OGGI User manual

Model - oggibr80
OWNER’S MANUAL
SAPORE OGGI 80cm
Page 1 of 8

Page 2 of 8

Prior to assembly, read the instructions carefully. Check all parts against the parts list. Carry out
assembly on a soft surface to avoid scratching. Please retain this information for future reference.
For ease of assembly only loosely tighten bolts and then tighten fully when assembly is complete.
STEP 1 - Attach 2 x short bracket (7) to 2x long bracket (6).
STEP 2 - Attach 2 x legs (9) , 2 x legs (8) , 1 x handle (5) to STEP 1 and fix by 14 x M8
bolts (A) , 16 x Φ8 flat washers (B) , 16 x Φ8 spring washers (C) and 16 x M8
nuts (D) .
Page 3 of 8

STEP 3 - Attach1 x bottom shelf (12) to STEP 2 and fix by 8 x M8 long bolts (E) ,
8 x Φ8 flat washers (B) , 8 x Φ8 spring washers (C) and 8 x M8 nuts (D).
STEP 4 - Feed wheel axle (11) through holes in wheel trolley section(8)
,feed 2 x M12 washers (G) and attach wheels (10) securing with
1 x M12 nut (F) per wheel. Enlarged view below for your reference.
STEP 5 - Li the oven and aach to well-assembled trolley
and fix by 4 x M6 bolts (H), 4 x Φ6 flat washers (I)
and 4 x Φ6 spring washers (J).
Note - take care when handling, cauon heavy load,
you should seek assistance to li this oven.
STEP 6 - Aach chimney cap (1) to chimney (2)
and feed chimney(2) to oven body (3).
STEP 7 - Aach door (4) to oven body (3).
Page 4 of 8

1
2
3
4
5
6
7
8
10
9
11
12
B(24x)
Φ8 Flat Washer
E(8x)
M8*35 Bolt
F(2x)
M12 Nut
G(4x)
Φ12 Flat Washer
Screw list
H(4x)
M6*20 Bolt
J(4x)
Φ6 spring washer
I(4x)
Φ6 flat washer
A(14x)
M8*20 Bolt
C(24x)
Φ8 Spring Washer
D(24x)
M8 Nut
Chimney 1
Oven body 1
1
1
Door
Handle
1
2
3
4
5
Chimney cap 1
Long bracket
62
Legs with axle hole 2
Legs 2
2
1
Wheel
Axle
7
8
9
10
11
12
Short bracket 2
Boom shelf 1
Page 5 of 8

Page 6 of 8

Page 7 of 8

Page 8 of 8