Saregama CARVAAN CBWY12 User manual

INSTALLATION GUIDE
MUSICBAR
1

2N WALLMOUNT BRACKETS
(50*100)
2 PLASTIC FASTENER (4*32)
2 SELF THREAD SCREW (4*30)
4 SELF THREAD SCREW (2*6)
1 WALL MOUNT PAPER TEMPLATE
2 PLASTIC FOOT &
1
2
3
4
5
6
SELF-ADHESIVE RUBBER FOOT
INSTALLATION KIT
2

WALLMOUNT CARVAAN MUSICBAR
Step 1: Fix the screws
Hole drill =4mm
0.30"/
7.8mm
1.18"/30mm
0.167"/
4.25mm
Step 2: Connect the brackets to the Carvaan Musicbar
The installation kit comes with 2 brackets - one for each end of the Carvaan
Musicbar. There are four holes (2 for each bracket) on the bottom of the
device. Align the holes on the device and brackets. Once aligned, fix the two
using the screws (2*6) provided in the wall mount kit. Your Carvaan Musicbar
is now ready to be wall mounted.
Stick the paper template in the installation kit using a tape on the wall.
Mark the wall mount bracket hole location given on this template using a
pen on the wall. Drill only centre hole at marked location and fix the screws
(4*30) along with plastic fasteners provided in the kit.
Note: ensure that the paper template is aligned correctly in order to avoid misalignment of the screws
3

PLACE YOUR CARVAAN MUSICBAR
ON A TABLE TOP
Step 1: Fix the plastic foot pegs
The installation kit comes with 2 plastic foot pegs. There are four holes (2
for each foot peg) on the bottom of the Carvaan Musicbar. Align the holes
on the device and foot pegs. Once aligned, fix the two using the screws
(2*6) provided in the installation kit.
The installation kit comes with 2 rubber foot. Peel the plastic on the same
and paste one on each foot peg.
Step 3: Hook the Caravan Musicbar on the wall
Step 2: Place the rubber foot
Hook the brackets on the screws drilled on your wall. Connect HDMI cable
before hanging.
4