-MODE: 1) Weighing units exchange key. Press the key to select catty, lb and kg sequentially while it is
unlocked. 2) Hold ’MODE’for 8 seconds to lock (‘off’) and unlock (‘on’) MODE key.
5. Operation
-Adjust 4 bottom screws to achieve a good level according to a small spheral gradienter on top of the scale.
-Plug the power core or install the batteries, press ’ON/TARE’ key to start the scale, wait until ‘8.8.8.8.8’. appear
on LCD for scale self-test. Then LCD displays zero and is ready for weighing operation.
-Put the weight on the weighing pan, the LCD digits will indicate the weighing value of the weight.
6. Warnings
-If you use the batteries for power supply, you must replace batteries when LCD flickers 'Lo'.
-The scale will cut off the power if on standby for 8 minutes.
-Keep the scale clean to ensure the normal working.
-Take the batteries out if not operate for a long time.
-The scales are either battery or Mains operated. Please ensure you do not use both battery and Mains power
at the same time.
-Always keep the scale dry and cover after use. The scale can be cleaned with a soft cloth and mild detergent.
-Keep the scale away from direct sunlight, heat, flame and high humidity.