Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Turn ten CAM SCREWS (1) into the LEFT/RIGHT PANELS (L).
å Then, insert four WOOD DOWELS (3) into the corner holes in
the LEFT/RIGHT PANELS (L)
å Insert ten HIDDEN CAMS (2) into the BOTTOM (J) and
FRONT/BACK PANELS (K).
å NOTE: The arrow in the HIDDEN CAM must point toward the
hole in the edge of the board.
Page 4 www.sauder.com 416819
1
L
L
3
(4 used)
(10 used)
2(10 used)
J
K
K
Arrow
