sauter TVM-N User manual

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [e-mail]
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
TVM-N – Assembly Instruction
TVM_N-ZB-e-1311 1
1. Unpack the test stand
2. Plug in the power supply
3. Attach a force gauge with an internal sensor

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [e-mail]
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
TVM-N – Assembly Instruction
TVM_N-ZB-e-1311 2
4. Attach a force gauge with an internal sensor
a. Dismount the red marked object

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [e-mail]
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
TVM-N – Assembly Instruction
TVM_N-ZB-e-1311 3
b. Connect the FH force gauge with the test stand (only FH U 5.1 series)
5. Alternative, if an external sensor is to be mounted:
a. Take the black angle piece

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [e-mail]
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
TVM-N – Assembly Instruction
TVM_N-ZB-e-1311 4
b. Attach the black angle piece to the upper part of the test stand
c. Attach the external sensor

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [e-mail]
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
TVM-N – Assembly Instruction
TVM_N-ZB-e-1311 5
d. Connect the sensor with the display unit (please see the operation manual)
Ready for measuring!