Savant OWM-P21W User manual

On-Wall Media Dock with PoE
(OWM-P21B/OWM-P21W)
Quick Reference Guide
009-0498-00
OWM-P21B
OWM-P21W
Copyright © 2012 Savant Systems LLC, SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC.
Apple®, iTunes®, iPod touch®, iPod® Classic and iPod nano® are registered trademarks or trade names of Apple Inc.
All brand names, product names and trademarks are the property of their respective owners.
Savant Systems, LLC reserves the right to change product specifications without notice.
Savant Confidential and Proprietary
031512
45 Perseverance Way, Hyannis, MA 02601 Phone [phone] Fax [phone] SavantSystems.com
The Savant®On-Wall Media Dock with Power over Ethernet (PoE) is available in two colors:
Black OWM-P21B or White OWM-P21W. This Quick Reference Guide provides the
information necessary to install On-Wall Media Dock for Apple iOS devices.
Media Dock Receiver -Front and Rear View
Box Contents
(1) On-Wall Media Dock Assembly (OWM-P21X)
(1) Cut out template (009-0247-xx)
(1) On-Wall Media Dock Bezel (074-0191-xxB/W)
(1) Installation Kit (075-0121-xx for Black/075-0120-xx for White)
•(1) 5V DC 2.5 Amps Power Supply (025-0098-xx)
•(8) #6 x 1/4 Screw (039-0143-xx)
•(4) #6 x 1.5 Screw (039-0068-xx)
•(4) #6-32 x 1.75 Screw (039-00209-xx)
•(1) Media Dock Filler Plate (074-0225-xxB/W)
•(2) Side Mounting Brackets for Extender Boxes (071-0494-xx)
(1) Media Dock Receiver (068-0305-xx)
(1) Quick Reference Guide (this document)
Specifications
Environmental
Operating Temperature
32º to 104º F (0º to 40º C)
Operating Humidity
10% to 90% Non-condensing
On-Wall Media Dock – Dimensions, Weight and Power
Dimensions (H x W x D)*
6.5 in x 5.0 in x 2.7 in (16.5 cm x 12.7 cm x 6.85 cm)
Weight
0.5 lb/0.23 kg
On-Wall Media Dock - Power
Supply
Powered over Ethernet using the PoE IEEE 802.3af standard.
Maximum Power Draw
8 Watts
Media Dock Receiver – Dimensions, Weight and Power
Dimensions (H x W x D)
1.27in x 4.23in x 6.20 in (3.23 cm x 10.73 cm x 15.74 cm)
Weight
1.5 lb/0.68 kg
Media Dock Receiver - Power
Supply
5V DC, 120-230V AC, 50/60 Hz
Maximum Power Draw
2 Watts
Compliance
Safety and Emissions
FCC Part 15/CE Mark/C-Tick
RoHS
Compliant
*Overall dimensions for dock, not cut out dimensions.
Connections
On-Wall Media Dock
PoE/Data
(Input from Network)
Port Type: RJ-45
Cable: Cat 5, use for system control (data) and 5V DC power.
24VDC port
(input power)
Not used with OWM-P21X
Audio
(Output to Media Dock
Receiver)
Port Type: RJ-45
Cable: Cat 5, use with MDR-2000 for audio transmission up
to 100 meters..
Video
(Output to Media Dock
Receiver)
Port Type: RJ-45
Cable: Cat 5, use with MDR-2000 for video transmission up to
100 meters.
Media Dock Receiver -Front
Video
(Input from On-Wall
Media Dock)
Port Type: RJ-45
Cable: Cat 5, use for video transmission up to 100 meters.
Audio
(Input from On-Wall
Media Dock)
Port Type: RJ-45
Cable: Cat 5, use for audio transmission up to 100 meters.
5VDC
(Input power from power
source)
Port Type: 4 mm x 1.35 mm 5V DC barrel power
jack/connector
120-230V AC, 50/60 Hz
Media Dock Receiver -Rear
Audio L, R
(Output)
Port Type: RCA (Stereo)
Video R, B, G
(Output)
Port Type: RCA (Component)
Typical Configuration
!"#$%
&$#'%
()&*+,
+-.-
/%0
1****2
!"#$#%&'()
*+",-&(+./#
(%01%2#2"&345#%&*+",-&(+./#
&
)26&!)3)78&)93&(%2"$%//#$
:2;<+//&=#54+&>%,?&
(+"@&(+./#&A4"-&'B;C@&
(%22#,"%$D&E1&"%&FGG0&
@3&>(
*%A#$&(%22#,"%$
=#54+&>%,?
'#,#4H#$
)E54%
345#%
IC3&>(
>+"+
*%J
K&&&&;
7#"A%$?
*%J

On-Wall Media Dock with PoE
(OWM-P21B/OWM-P21W)
Quick Reference Guide
009-0498-00
OWM-P21B
OWM-P21W
Copyright © 2012 Savant Systems LLC, SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC.
Apple®, iTunes®, iPod touch®, iPod® Classic and iPod nano® are registered trademarks or trade names of Apple Inc.
All brand names, product names and trademarks are the property of their respective owners.
Savant Systems, LLC reserves the right to change product specifications without notice.
Savant Confidential and Proprietary
031512
45 Perseverance Way, Hyannis, MA 02601 Phone [phone] Fax [phone] SavantSystems.com
SURGE PROTECTION:Use a surge-protected circuit for all components requiring
120V AC, 50/60 Hz source power.
ELECTRICAL DISCONNECT: The 120V AC, 50-60 Hz source power outlet and input
power sockets should be easily accessible in the event of an electrical hazard or malfunction
condition.
ELECTRICAL DISCONNECT: The 5V DC power adapter on the Media Dock Receiver
should be easily accessible in the event of an electrical malfunction.
Interconnecting the Components
When interconnecting components, refer to Interconnecting Information above.
1. Plug the DC power adapter to the Power Strip (surge protected).
2. Route the Cat 5 cables from the Media Dock Receiver to inside the wall opening.
3. Connect the Cat 5 cables from the Media Dock Receiver to the On-Wall Media Dock
ports as follows:
Media Dock Receiver
On-Wall Media Dock
Audio
Audio
Video
Video
4. After making the connections to On-Wall Media Dock, position the unit in the opening
and secure with the two rotating mounting tabs.
5. Turn the tab screws clockwise; the tabs will grab the interior wall. Tighten until snug.
Do not over tighten.
Caution: Do not use a powered screwdriver to tighten the tabs; the tabs can be easily over
tightened.
Note: The On-Wall Media Dock also has screw-mounting holes for optional stud mounting.
6. Position the bezel over the Media Dock Assembly and press, ensuring that the wall
plate seats properly.
7. After the components are installed and interconnected, connect the 5V DC power
adapter to the Media Dock Receiver 5V adapter port.
8. Connect the 5V DC and activate the PoE for the OWM-P210X.
9. Then connect the 120V AC, 50 Hz connector end to the power strip.
10. Configure the installation using RacePoint Blueprint™.
Optional Pre/Post-Construction Box
Note: The On-Wall Dock Assembly is not a weather resistant unit. Do not locate in a damp or
humid area.
The OWM-P21X can be installed with or without an On-Wall construction box. The On-Wall
construction box for the iPod (RIB-OWMD) is optional and can be used pre-or post-
construction to save the space required for the OWM-P21X and to terminate the roughed in
wires.
Installing the On-Wall Dock into the RIB-OWMD
1. Remove Retainer caps (4) from the back of the OWM-P21X with pliers.
2. Remove flags (4) by removing the screws.
3. Place the OWM-P21X into the RIB-OWMD and use the 6/32 screws (4) to attach.
MDR-2000 Bracket Installation
Use the supplied screws to install the Side Mounting Brackets (071-0494-xx) to the MDR-
2000 as shown.
Additional Documentation
For more documentation, go to SavantSystems.com and navigate as follows:
>Dealer Login > Knowledge Base > Products
•Refer to the Construction Box for On-Wall Dock (RIB-OWMD)Quick
Reference Guide
•Refer to the RacePoint Blueprint™Programming Guide