SAVEO SAVEO-PKT2-E800 User manual

V 1.3
Quick Setup Bluetooth HID
TIP: <W^&KEKd/^Z
SAVEO-PKT2-E800
Quick SetƵƉ'ƵŝĚĞ
kage 
  PKT2E800 cnne    2.4GHz USB Wireless Dongle (Plug & Play)
  U e Charging ce 1 x Attachable Lanyard
 3M™ VHB™ Device Mount Plate 1 x Retractable Badge Reel Lanyard
Important Safety Information
Don’t put scanner, cable or accessories in places of excessively high temperature, such as
exposure to direct sunlight. Don’t use scanner in extremely humid conditions or in
conditions of extreme temperature change. Never damage the internal rechargeable
battery. Damaging the casing of the rechargeable battery might cause explosion or fire!
Scan this barcode to
activate Bluetooth mode
and to put the scanner into
"Pairing mode", ready to
pair to your mobile device.
Bluetooth Mode
2.) Enable Bluetooth on
your mobile device
Go to your phone’s homescreen
and find “Settings”, then
“Bluetooth” and turn Bluetooth
on. Your device will search for
available devices within range.
After approx 20 seconds, Saveo
Scan will appear as an external
keyboard with a unique
identifier serial number (PKT2-
XXXXXXXX).
Select the scanner from
“Available Devices” and wait for
pairing process to complete.
Once “Connected” is displayed,
your device is paired to the
scanner. Your scanner is now
ready to use.
1.) Enter Pairing Mode
Please Note: Devices only
need to be paired once.
When they are within
Bluetooth range they will
automatically attempt to
connect to each other. If
you wish to connect to
another device it is
recommended you first
unpair this device.
Scanning with Simplicity
Saveo® and Saveo Scan™ are trademarks of Stimare Limited. All other trademarks are property of their respective owners
Quick Setup 2.4GHz Wireless (Default)
Plug & Play USB 2.4GHz
Wireless Dongle (included)
Connect the included USB
2.4GHz Wireless Dongle to a
free USB-A port on your
computer. The dongle is a
USB Class Compliant device
and does not require a driver
to operate in HID mode.
2.) Perform a Test Scan
To test that your scanner is
connected, open Notepad or a Text
Editor application on your
connected computer, focus the
cursor, and scan the Test Barcode.
1.) Connect Via 2.4Ghz
Please Note: When the
scanner is within range of USB
2.4Ghz receiver, the devices
will automatically attempt to
connect to each other until a
connection is established.
Test Barcode
You will see
"Connection
Successful" text
populate in your
text editor upon
scanning the above
test barcode,
confirming your
device is connected.
Wireless 2.4GHz mode
-1- -2-

-3- -4- -5-
Bluetooth Connection Modes
2.4Ghz Wireless Connection Modes
USB VCOMM Emu
Plug & Play Keyboard
Emulation Mode (no App
required)
Virtual Com Port over USB
Dongle mode (requires a
compatible Application or
Driver)
Bluetooth HID (Default)
Bluetooth SPP Mode
Bluetooth BLE Mode
Bluetooth HID Keyboard
Emulation Mode (no App
required)
Bluetooth SPP Serial Port
Profile Mode (requires
compatible App or Driver)
Bluetooth BLE GATT
Profile, (requires
compatible App or Driver)
USB Wired Connection Modes
USB Keyboard HID (Default)
USB VCOMM
Bluetooth Transmission Speed
Low Speed
High Speed
Data Transmission Modes
Direct Mode (Default)
Memory Mode
Memory Data Upload
Total Storage Count
Clear Memory
Charging your device
1.) Connect the USB Type-C Cable (included)
On / Off
Bu�on
Medium Speed (Default)
Please note: The following 2.4GHz wireless
modes require use of the Plug & Play USB
2.4GHz Wireless Dongle (included).
Simply connect the USB Type-C cable
to the port on the bottom of the
scanner and connect the USB Type-A
end to a USB Type-A port (Minimum
output Rating: 900mA+).
USB Keyboard Emu (Default)
Please note: USB VCOMM
requires a compatible App
or Driver

-6--7- -8-
Enter Sleep Mode / Set Standby time
Standby / Sleep Immediately
1 Min (Default)
5 Mins
10 Mins
Data Transmission Modes
Direct Mode (Default)
Memory Mode
Memory Data Upload
Total Storage Count
Clear Memory
Charging your device
1.) Connect the USB Type-C Cable (included)
Simply connect the USB Type-C cable
to the port on the bottom of the
scanner and connect the USB Type-A
end to a USB Type-A port (Minimum
output Rating: 900mA+).
On / Off
Bu�on
Vibration / Haptic Feedback
Disable
Enable (Default)
Mute
High Volume
Low Volume
30 Mins
Never
Audible Beeper

Keyboard Languages
U.S. English Keyboard (Default)
French Keyboard
Germany Keyboard
Italy Keyboard
US: [phone]
UK: [phone]
IRE: [phone]
For Support, please
Contact us at:
Email:[e-mail]
Web: www.saveoscan.com
Limited Warranty
Saveo provides a one year limited warranty. This warranty does not
cover any product which has been subject to improper use, neglect
or unauthorized repair or installation. This warranty does not cover
consumable parts (Cables & batteries are consumables).
System Parameters
Get Firmware Version
Transmits Firmware
version information to
the connected device.
Portugal Keyboard
-9--10--11-
Spain Keyboard
UK Keyboard
Hungary Keyboard
Turkey Q Keyboard
Turkey F Keyboard
Keyboard Languages (continued)
LED Status Indicator Chart
Battery Level Status
Scan the following
barcode to send the
current battery level
information to your
device. Check Battery Level
Factory Reset
Returns the scanner to
factory default settings
Please note: A full hard reset Advanced
Sengs document is available to
download at: saveoscan.com/downloads
Please refer to the table below for information
regarding LED status indicator for the scanner.