Saxon STOPLOCK User manual

Installation & Usage Instructions
VAN LOCK
Important notice to customers:
Any anti-theft device can only be a deterrent against a
determined theif. Notwithstanding the fitting of this anti-theft
device, the vehicle and contents should always be fully insured
against theft. Saxon disclaims any liability for the theft of any
vehicles and/ or its contents while fitted with this device. This
notice does not affect the guarantee given by Saxon to the
customer, or the customer’s statutory rights.
Insert the key into cylinder
1
Rotate key 270 degrees clockwise
2
Slide the cylinder out
3
Remove the puck lock
4
Use Instructions
Everland Road, Hungerford,
Berkshire, RG17 0DX, UK
01488 689 400
[e-mail]
www.saxon-brands.com
Wunder-Baum Limited
6th Floor, South Bank House
Barrow Street, Dublin 4, Ireland
STOPLOCK® is a registered trademark
of Saxon © 2021 by Saxon

left door right door
Turn the nut clockwise until locked tightly
Installation Instructions Use Instructions
Drill the mounting holes as below:
Fix the right base into the door as below:
FRONT VIEW
FRONT VIEW
REAR VIEW
1
2
3
Take the same as per to fix the left base
23 4
Position puck lock into the hasp
Rotate key 270 degrees anticlockwise and
remove the key
1
2
Press the cylinder to lock
3
Locked successfully
4
Press