Scallywag Kids POD Shelf Unit User manual

- 1 -
Assembly Instructions
POD Shelf Unit
COMPONENTS;
2 x Sides (Left & right)
1 x Bottom Shelf
1 x middle shelf
1 x grooved top rail
2 x back panel
1 x box fittings
(Contents as below)
Tools required
8 x cam bolt
A
8 x cam (pre-
inserted)
B
3 x castor
C
12 x 8mm Dowel
(pre-inserted)
D
3 x castor
bush(pre-
inserted)
E
1 x“H” profile rear
panel connector
F
A
A
B
B
C
1. Lay side down on a clean
even surface. Insert cam bolt A
into 5mm holes.
2. Insert cam B to 15mm holes
on bottom & middle shelf
3. Fix in position and lock by
turning Cam B in clockwise
direction

- 2 -
4.Firmly locate Grooved cross rail
into position
5. Join the 2 rear panel pieces
together with “H” section rear panel
connector F
Slide the rear panel into position
within the grooves
6.Attach other side and secure
turning cams B clockwise as in 2.
7.Firmly press the castors into the
castor bush located on the underside
of the bottom shelf
Please read & check through these instructions carefully before proceeding
with assembly.
This product is designed to conform to the latest safety regulations and we hope you will be happy
with your purchase. Whist every effort is made to ensure this product reaches you in good condition,
in the unlikely event you find a problem with any component, please do not attempt to assemble –
and contact your retailer. As you will appreciate, we cannot accept liability for damage once an
attempt to assemble has been made.
CLEANING: - A damp cloth should be sufficient to keep this product in good order. Please do not
attempt to use abrasive cleaning materials, as this will incur damage.
Thank you for choosing our product. We hope you will be happy with your purchase.