Scaltek STK-HDBT-3TX-CAT User manual

UMEN-STKHDBT3TXCAT-071013-V1.0
STK-HDBT-3TX-CAT
HDMI + DATAS 1x3 OVER CAT6 TRANSMITTER
USER MANUAL

STK-HDBT-3TX-CAT user manual
2
www.scaltek.com
SUMMARY
1. INTRODUCTION............................................................................................................................. 3
2. APPLICATIONS .............................................................................................................................. 3
3. PACKAGES CONTENT .................................................................................................................. 3
4. MAIN FEATURES ........................................................................................................................... 3
5. OPERATION CONTROLS AND FUNCTIONS................................................................................ 4
a. Front Panel.................................................................................................................................. 4
b. Rear Panel................................................................................................................................... 5
c. IR Cable Pin Assignment............................................................................................................. 5
6. CONNECTION DIAGRAM............................................................................................................... 6
7. SPECIFICATIONS........................................................................................................................... 7
a. Main Specifications...................................................................................................................... 7
b. CAT5e/6/7 cable specifications................................................................................................... 7
8. WARRANTY AND CONTACTS....................................................................................................... 8

STK-HDBT-3TX-CAT user manual
3
www.scaltek.com
1. INTRODUCTION
STK-HDBT-3TX-CAT is a professional HDMI and datas (IR, RS-232, Ethernet) transmitter over CAT6.
It operates on HD-BaseT standard to transmit HDMI full HD and data over 100 m on a single CAT6
cable. It has 3 CAT6 outputs and 1 HDMI local output. It is compatible with STK-HDBT-RX-CAT
receivers. The PoE capabilities enable STK-HDBT-3TX-CAT to supply power to the receivers. It can
support resolution up to 1080p Full HD, 4kx2K timing, 3D and multi-channel digital audio format. For a
maximum compatibility it is advised to use FTP CAT6 AWG 23 cable.
2. APPLICATIONS
Increasing HDMI and datas transmission range for r
Conference rooms
Meeting rooms
Congress Hall
Crisis room
3. PACKAGES CONTENT
STK-HDBT-3TX-CAT
1x IR Receiver
1x IR blaster
1x 24VDC Power supply
Power cord
User manual
4. MAIN FEATURES
HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant
The HDMI and CAT5e/6/7 outputs are playing the same source simultaneously
Supports data rate from 250Mbps up to 3Gbps
Supports wide range of PC resolutions from VGA to WUXGA and HDTV resolutions up to
4Kx2K (3840x2160@30Hz and 4096x2160@24Hz)
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
transmission (32-192kHz sample rate)
Supports distances up to 100 meters through CAT5e/6/7 cables
Supports Ethernet transmission rate up to 100Mbps
Can select Standard or TV EDID
Supports USB service port
The 3D signal display follow by display TV’s EDID
Supports PoE with capable Receiver units
Supports Bi-directional IR control

STK-HDBT-3TX-CAT user manual
4
www.scaltek.com
Note:
1. This system was tested with CAT6/23AWG cables, results may vary with cables of a different
specification.
2. The PoE function is designed for powering compatible Receiver units only non-PoE Receivers will
need their own power supply.
3. Receivers of another brand may not be compatible.
4. Displaying HDMI 4Kx2K resolution require the standard 4Kx2K HDMI cable and display in order for
proper image displaying.
5. OPERATION CONTROLS AND FUNCTIONS
a. Front Panel
1- HDMI IN: Connect with source equipment such as DVD/Blu-ray or PS3 player.
2- SYNC: This LED will illuminate when the HDMI input port connected to the source.
3- HDMI OUT: Connect to HDMI display for instant image display or cascade with another family type
Transmitter.
4- HDMI LINK: This LED will illuminate when HDMI output is connected to TV or display monitor.
5- EDID STD/TV: The default factory setting is on TV, leave as it is when the display is properly. The
unit will detect the 1st CAT5e/6/7 output’s EDID when it obtain a 4Kx2K EDID and send out the signal
accordingly to other output ports. If the 1st CAT5e/6/7 output is without a 4Kx2K's EDID the unit will
detect all output's EDID and send out the signal that all outputs can accept.
This device obtain the last memory function therefore, the device will use the last output port 1's EDID
when output port 1 is not connected to a display after power cycling or switch in between the EDID
setting.
Switch to STD to use build-in EDID if the display has problem. STD EDID's video at 1080p@60Hz and
audio at LPCM 2CH.
6- SERVICE: This slot is reserved for factory service only.
7- POWER LED: Once the power supply is connected the LED will illuminate
8- DC 24V: Plug the 24V DC power supply into the unit and connect the adaptor to an AC outlet.

STK-HDBT-3TX-CAT user manual
5
www.scaltek.com
b. Rear Panel
1- IR IN: Connect with IR Extender to receive IR signal from Transmitter side and blast out at Receiver
side. Ensure that remote controller being used is within he direct line-of-sight of the IR Extender.
2- IR OUT: Connect with IR Blaster to blast out the IR signal received from the Receiver side. Place
the IR Baster in direct line-of-sight of the equipment to be controlled.
3- LAN: Connect to intra-net or internet service system for a total sharing rate of 100Mbps within the
link of Transmitter.
Warning: Do not connect this slot with any of the CAT5e/6/7 port, doing so may trigger a power
shot down and ruin the device. This misuse can't be covered by the warranty.
4- CAT5e/6/7 OUT 1~3: Connect these ports to CAT5e/6/7 to HDMI Receivers (with or without PoE
function) with CAT5e/6/7 cable to extend the signal up to 100m.
5- MODE & LINK 1~3: The Mode LED will illuminate when the device is connected with power. The
link LED will illuminate when CAT5e/6/7 output(s) has been connected to the Receiver(s) and the
Receiver(s) has connected with display that shows image on screen.
c. IR Cable Pin Assignment

STK-HDBT-3TX-CAT user manual
6
www.scaltek.com
6. CONNECTION DIAGRAM

STK-HDBT-3TX-CAT user manual
7
www.scaltek.com
7. SPECIFICATIONS
a. Main Specifications
Video Bandwidth
300Mbps/10.2Gbps
Input ports
1 x HDMI
1 x IR IN, 1 x LAN*
1 x USB (Service only)
Output ports
1 x HDMI
3 x CAT5e/6/7
1 x IR OUT
Resolution
Up to 4Kx2K (3840x2160@30Hz/4096x2160@24Hz)
CAT5e/6/7 Output
Cable Distance
Up to 100m
IR Frequency
30~50kHz
Power Supply
24V / 2.7A DC (US/EU standards, CE/FCC/UL certified)
Dimensions
145 mm(W) x 199 mm(D) x 30 mm(H)
Weight
590 g
Chassis Material
Metal
Silkscreen Color
Black
Operating
Temperature
0°C ~ 40°C
Storage Temperature
-20˚C ~ 60˚C
Relative Humidity
20 ~ 90% RH (non-condensing)
Power Consumption
36W
b. CAT5e/6/7 cable specifications
Cable
Type
Range
Pixel clock
rate
Video Data
Rate
Supported Video
CAT5e/6/7
100 m
<=225 MHz
<=5.3 Gbps
(HD Video)
Up to 1080p, 60 Hz, 36 bits, 3D (data
rates lower than 5.3 Gbps or below 225
MHz TMDS clock).
70 m
>225 MHz
> 5.3 Gbps
(Ultra HD
Video)
4K2K, 30Hz video
formats

STK-HDBT-3TX-CAT user manual
8
www.scaltek.com
8. WARRANTY AND CONTACTS
The warranty of this product is 2 years Parts and Labor from the date of purchase. If the fault in the
product is due to improper use of the product or operations carried out by third parties, the warranty is
lost. If the product frame is open, the warranty is lost.
During the warranty period, the unit will be repaired free of charge. Return shipping are the
responsibility of the customer. Return shipping have to be made through your local distributor/dealer.
For any question during the installation, contact our after sales service on the following address:
[e-mail]