Scandomestic IKF160-1 User manual

!
"!
Scandomesc A/S · DK-8600 Silkeborg · Tel.: + 45 7242 5571 · www.scandomesc.dk
#
IKF$160-1$
Brugermanual*
User*manual*
Bedienungsanleitung*
Bruksmanual*
!

Læs$denne$brugsanvisning$
omhyggeligt!$
$%&'!()*+',!
-! .%/! +'**'! 0&)1/2*34/*4*1! 56&! +)! 721'&!
8&9+)(7'7!4!0&)1!56&/7'!12*1:!;'7!34<!=>%<8'!
+41!?'+!27!0&)1'!91!3'+<41'=9<+'!+'7!(9&@
&'(7!/2?7!59&<%*1'!<'3'74+'*:!
-! A'?!0&)1/2*34/*4*1'*!74<!/'*'&'!0&)1B!=34/!
+'77'!/()<<'!0<43'!*6+3'*+417!91!/6&1!59&B!27!
3'><'+*4*1'*! 56<1'&B! =34/! 8&9+)(7'7! /(457'&!
'>'&?2*+:!
;'**'!0&)1/2*34/*4*1!4*+'=9<+'&!/4(('&='+/4*@
/7&)(749*'&B! 0'7>'*4*1/3'><'+*4*1'&B! 4*/72<<274@
9*/4*/7&)(749*'&!91!748/!74<!8&90<'?<6/*4*1!??:!
Før$du$ringer$efter$service:$
-! A'**'?1C! 25/*477'7! 9?! 748/! 74<! 8&90<'?@
<6/*4*1:!;'77'!34<!=>%<8'!+41!?'+!/'<3!27!<6@
/'!*91<'!+'!?'/7!2<?4*+'<41'!8&90<'?'&:!
-! D34/! +)! 4(('! /'<3! (2*! <6/'! 8&90<'?'&*'B!
&4*1!+2!'57'&!=>%<8!5&2!8&95'//49*'<<'!7'(*4@
('&':!
Når$De$ringer$op:$
-! E(2<! ;'! 2*143'! 2882&27'7/! 5)<+'! &'5'&'*F'!
G?9+'<B! 7H8'B! /'&4'*)??'&I:! ;4//'!!98<H/@
*4*1'&!/7C&!8C!7H8'/(4<7'7B!+'&!/4++'&!8C!28@
82&27'7:!
-! E(2<!;'!98143'B!=39&!91!=34<('*!59&=2*+<'&!
8&9+)(7'7! '&! (607! =9/B! /2?7! 98<H/'! (607/@
+279'*:!
Uberettiget$tilkaldelse$af$teknisk$service:$
J*+'*! /'&34F'! 74<(2<+'/B! (9*7&9<<'&'/! +'! 5'><?)@
<41='+'&B!+'7!'&!?)<417!/'<3!27!)+0'+&':!EC5&'?7!
(&23'7! 9?! )+0'+&4*1! '&! )0'&'7741'7B! 8C=34<'&!
+'7!()*+'*!/'<3!27!0'72<'!+'!9?(9/7*4*1'&B!+'&!
'&!59&0)*+'7!?'+!27!=23'!74<(2<+7!/'&34F':!!
Reklamationsfrist:$
K'(<2?2749*/5&4/7! 9?5277'&! )+'<)(('*+'! 52@
0&4(/*H'! 8&9+)(7'&! 4*+(607! 4! ;2*?2&(:! K'(<2@
?2749*/5&4/7'*! '&! 1H<+41! LM! ?+&:! 5&2! (60/+279B!
*C&!+'&!59&'34/'/!(3477'&4*1B!&'1*4*1!'<<'&!74</32@
&'*+'B! =39&25! (60/+279'*! 5&'?1C&:! N)*(749*/@
3417! 8C! 8&9+)(7'&*'B! +'&! /(H<+'/! 4*/72<<2749*/@
?%//41'! 59&=9<+B! +%((('/! 4(('! 25! &'(<2?274@
9*/5&4/7'*:!K'(<2?2749*/5&4/7'*!4*+/(&%*('&!4(@
('!(60'&/!&'7741='+'&!45<1:!<93143*4*1'*:!
Reklamationsfristen$omfatter$ikke:$
-! N'><! '<<'&! /(2+'&! 98/7C'7! +4&'(7'! '<<'&! 4*+4@
&'(7'! /9?! 56<1'! 25! 93'&<2/7B! 5'><0'7>'*4*1B!
?4/0&)1B! /(6+'<6/! 0'=2*+<4*1B! ?2*1'<5)<+!
3'+<41'=9<+'</'B! 5'><21741! 4*+0H1*4*1B! 98@
/74<<4*1!91! 74</<)7*4*1B!/8%*+4*1/32&42749*'&!
'<<'&!'<'(7&4/('!59&/7H&&'</'&!'<<'&!3'+!&'82@
&2749*! )+56&7! 25! 2*+&'! '*+! EF2*+9?'/74F!
OPE!2)79&4/'&'+'!7'(*4('&':!
-! N'><! '<<'&! /(2+'&! 98/7C'7! /9?! 56<1'! 25! '&@
=3'&3/?%//41! '<<'&! 2*+'*! 0&)1! 25! 8&9+)(@
7'&B!+'&!'&!0'&'1*'7!74<!8&4327'! =)/=9<+*4*@
1'&:!
-! Q&/727*4*1! 59&! '3'*7)'<<'! 56<1'/(2+'&B! ='&@
)*+'&!/(2+'&!8C!2*+&'!1'*/72*+'B!+&457720!
'7F:B!?'+?4*+&'!2*+'7!'&!<93?%//417!52/7@
<217!
Transportskader:$
Q*! 7&2*/89&7/(2+'B! +'&! (9*/727'&'/! 3'+! 59&@
=2*+<'&'*/!<'3'&4*1!=9/!()*+'*B!'&!8&4?%&7!'*!
/21!?'<<'?!()*+'*!91!59&=2*+<'&'*:!J!74<5%<+'B!
=39&! ()*+'*! /'<3! =2&! /7C'7! 59&! 7&2*/89&7'*! 25!
8&9+)(7'7B! 8C721'&! <'3'&2*+6&'*! /41! 4*1'*! 59&@
8<417'</'&! 4! 59&04*+'</'! ?'+! '37:! 7&2*/89&7/(2@
+':! Q37:! 7&2*/89&7/(2+'&! /(2<! 2*?'<+'/! 9?1C@
'*+'!91!/'*'/7!LM!74?'&!'57'&B!27!32&'*!'&!<'3'@
&'7:! J! ?9+/27! 52<+! 34<! ()*+'*/! (&23! ()**'! 2534@
/'/:!
Erhvervskøb:$
Q&=3'&3/(60! '&! '7=3'&7! (60! 25! 8&9+)(7'&B! +'&!
4(('! /(2<! 0&)1'/! 4! '*! 8&4327! =)/=9<+*4*1B! ?'*!
2*3'*+'/! 74<! '&=3'&3! '<<'&! '&=3'&3/<41'*+'! 54&@
?C<!G&'/72)&2*7B!F25RB!(2*74*'!'7F:I!'<<'&!0&)1'/!
74<!)+<'>*4*1!'<<'&!2*+'*!2*3'*+'</'B!+'&!9?527@
7'&! 5<'&'! 0&)1'&':! J! 59&04*+'</'! ?'+! '&=3'&3/@
(60! H+'/! 4*1'*! 12&2*74B! +2! +'77'! 8&9+)(7! )+'@
<)(('*+'! '&! 0'&'1*'7! 74<! 2<?4*+'<41! =)/=9<+@
*4*1:!
!
Vigtigt!$
S%&!98?%&(/9?!8CB! 27! 8&9+)F'*7'*B! /9?! 56<@
1'! 25! (9*/72*7! )+34(<4*1! 91! 2>9)&56&4*1! 25! 8&9@
+)(7'7B! (2*! 59&'721'! %*+&4*1'&! )+'*! 59&)+1C@
'*+'!32&/'<:!
!
!

!
L!
Bortskaffelse$
Bortskaf$produktets$emballage$korrekt.$
J! ='*=9<+! 74<! TQQQU/! +4&'(74@
3'&! ?C! +'77'! 8&9+)(7! 4(('!
/?4+'/!4!/(&2<+'/82*+'*:!;'7!
/(2<! 25<'3'&'/! 8C! '*! 1'*@
0&)1//72749*:! VC! +'*! ?C+'!
=>%<8'&! +)! ?'+! 27! 0'/(H77'!
?4<>6'7:!
!
ADVARSEL!$
Q?02<<21'*!(2*!3%&'!52&<41!59&!06&*,!
V<2/7+'<'! '&! ?%&('7! ?'+! +'! 4*7'&*2749*2<'!
/72*+2&+59&(9&7'</'&W!
VQ!@!89<H'7=H<'*B!5:'(/:!4*+82(*4*1/59<4'*!
VE!@!89<H/7H&'*B!5:'(/:!89</7&4*1/?27'&42<'7!
VX!Y!@!89<H9ZH?'7=H<'*B!5:'(/:!8<2/7F<48/!
VV!@!89<H8&98H<'*B!5:'(/:!/2<77&217'*!
O[! E! @! 2F&H<9*47&4<@0)72+4'*@/7H&'*B! 5:'(/:! (9*@
7&9<82*'<'7:!
Q<'(7&4/(!91!'<'(7&9*4/(!)+/7H&!GQQQI!4*+'=9<+'&!
?27'&42<'&B! (9?89*'*7'&! 91! /7955'&B! +'&! (2*!
3%&'!52&<41'!91!/(2+'<41'!59&!?'**'/('&/!/)*+@
='+! 91! 59&! ?4<>6'7B! *C&! 2552<+'7! 25! '<'(7&4/(! 91!
'<'(7&9*4/(!)+/7H&!GTQQQI!4(('!09&7/(255'/!(9&@
&'(7:!
V&9+)(7'&B! +'&! '&! ?%&('7! ?'+! *'+'*/7C'*+'!
\93'&(&H+/'+'! /(&2<+'/82*+]B! '&! '<'(7&4/(! 91!
'<'(7&9*4/(! )+/7H&:! ;'*! (&H+/'+'! /(&2<+'/82*+!
/H?09<4/'&'&B! 27! 2552<+! 25! '<'(7&4/(! 91! '<'(7&9@
*4/(! )+/7H&! 4(('! ?C! 09&7/(255'/! /2??'*! ?'+!
)/9&7'&'7!=)/=9<+*4*1/2552<+B!?'*!/(2<!4*+/2?@
<'/!/%&/(4<7:!
^4<! +'77'! 59&?C<! =2&! 2<<'! (9??)*'&! '720<'&'7!
4*+/2?<4*1/9&+*4*1'&B! =39&! 2552<+! 25! '<'(7&4/(!
91! '<'(7&9*4/(! )+/7H&! 1&274/! (2*! 25<'3'&'/! 25!
09&1'&*'!8C!1'*0&)1//72749*'&!'<<'&!2*+&'!4*+@
/2?<4*1//7'+'&! '<<'&! ='*7'/! +4&'(7'! 5&2! =)/@
=9<+*4*1'&*':! _%&?'&'! 4*59&?2749*! /(2<! 4*+@
='*7'/!=9/!(9??)*'*/!7'(*4/('!59&32<7*4*1:!
!
!
!
$
!

2
Congratulations on the purchase of your new Induction Hob.
We recommend that you spend some time to read this Instruction / Installation
Manual in order to fully understand how to install correctly and operate it.
For installation, please read the installation section.
Read all the safety instructions carefully before use and keep this Instruction /
Installation Manual for future reference.
ProductOverview
Top View
Control Panel
1. Heating zone selection controls
2. Power / Timer regulating key
3. keylock control
4. ON/OFF control
5. Timer control
1. Max. 1400 W zone
2. Max. 1800 W zone
3. Max. 1400 W zone
4. Max. 1800 W zone
5. Glass plate
6. Control panel
7. ON/OFF control
7
1
2 5
6
3
1
12
46
6

3
AWordonInductionCooking
Induction cooking is a safe, advanced, efficient, and economical cooking
technology. It works by electromagnetic vibrations generating heat directly in the
pan, rather than indirectly through heating the glass surface. The glass becomes
hot only because the pan eventually warms it up.
Before using your New Induction Hob
• Read this guide, taking special note of the ‘Safety Warnings’ section.
• Remove any protective film that may still be on your Induction hob.
Using the Touch Controls
• The controls respond to touch, so you don’t need to apply any pressure.
• Use the ball of your finger, not its tip.
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean, dry, and that there is no object (e.g. a
utensil or a cloth) covering them. Even a thin film of water may make the
controls difficult to operate.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents

4
Choosing the right Cookware
• Only use cookware with a base suitable for induction
cooking. Look for the induction symbol on the
packaging or on the bottom of the pan.
• You can check whether your cookware is suitable by carrying out
a magnet test. Move a magnet towards the base of the pan. If it
is attracted, the pan is suitable for induction.
• If you do not have a magnet:
1. Put some water in the pan you want to check.
2. If does not flash in the display and the water is heating, the pan is suitable.
• Cookware made from the following materials is not suitable: pure stainless steel, aluminium or
copper without a magnetic base, glass, wood, porcelain, ceramic, and earthenware.
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is
the same size as the cooking zone. Use pans whose diameter is as large as the
graphic of the zone selected.Using a pot a slightly wider energy will be used at its
maximum efficiency.If you use smaller pot efficiency could be less than
expected.Pot less than 140 mm could be undetected by the hob. Always centre
your pan on the cooking zone.
Always lift pans off the Induction hob – do not slide, or they may scratch the glass.

5
UsingyourInductionHob
To start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays
show “ – “ or “ – – “, indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control ,and
a indicator next to the key will flash
4. Select a heat setting by touching the “-”or “+”
control.
• If you don’t choose a heat setting within 1
minute, the Induction hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.

6
If the display flashes alternately with the heat
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed
on it.
When you have finished cooking
1. Touching the heating zone selection
control that you wish to switch off
2. Turn the cooking zone off by scrolling down to”0” or touching”-“ and”+”
control together. Make sure the display shows”0”
3. Turn the whole cooktop off by touching the
ON/OFF control.

7
4. Beware of hot surfaces
H will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate
that is still hot.
LockingtheControls
• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
To lock the controls
Touch the keylock control. The timer indicator will show “ Lo “
To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the keylock contro for a while
3. You can now start using your Induction hob.
When the hob is in the lock mode,all the controls are disable except theON/OFF ,
you can always turn the induction hob off with the ON/OFF control in an
emergency,but you shall unlock the hob first in the next operation
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the Induction
hob. When an excessive temperature is monitored, the Induction hob will stop
operation automatically.
Detection of Small Articles
When an unsuitable size or non-magnetic pan (e.g. aluminium), or some other
small item (e.g. knife, fork, key) has been left on the hob, the hob automatically
go on to standby in 1 minute. The fan will keep cooking down the induction hob for
a further 1 minute.

8
Auto Shutdown Protection
Auto shut down is a safety protection function for your induction hob. It shut down
automatically if ever you forget to turn off your cooking. The default working times
for various power levels are shown in the below table: .
Power level 1 2 3 4 5 6 7 8 9
Default working timer (hour) 8 8 8 4 4 4 2 2 2
When the pot is removed, the induction hob can stop heating immediately and the
hob automatically switch off after 2 minutes.
People with a heart pace maker should consult with their doctor before
using this unit.
UsingtheTimer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer up to 99 minutes.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you’re not selecting any cooking
zone.
2. Touch timer control , The minder indicator
will start flashing and “10” will show in the
timer display.

9
3. Set the time by touching the “-“ or ”+” control
of the timer
Hint: Touch the “-“ or “+” control of the timer
once to decrease or increase by 1 minute.
Hold the”-“ or “+” control of the timer to
decrease or increase by 10 minutes.
4. Touching the ”-“ and “+” together, the timer is cancelled, and the”00” will show
in the minute display.
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
6. Buzzer will bips for 30 seconds and the timer
indicator shows “- - “ when the setting time
finished.
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1. Touching the heating zone selection control
that you want to set the timer for. (e.g. zone 3#)

10
2. Touch timer control , The minder indicator
will start flashing and “10” will show in the
timer display.
3. Set the time by touching the or control of the
timer
Hint: Touch the “-“ or “+” control of the timer
once will decrease or increase by 1 minute.
Touch and hold the “-“ or “+” control of the timer
will decrease or increase by 10 minutes.
4. Touching the “-“ and “+” together, the timer is cancelled, and the “00” will
show in the minute display.
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.

11
6. When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
Other cooking zone will keep operating if they are turned on previously.
CookingGuidelines
Take care when frying as the oil and fat heat up very quickly, particularly
if you’re using PowerBoost. At extremely high termperatures oil and fat
will ignite spontaneously and this presents a serious fire risk.
Cooking Tips
• When food comes to the boil, reduce the temperature setting.
• Using a lid will reduce cooking times and save energy by retaining the heat.
• Minimise the amount of liquid or fat to reduce cooking times.
• Start cooking on a high setting and reduce the setting when the food has heated
through.
Simmering, cooking rice
• Simmering occurs below boiling point, at around 85˚C, when bubbles are just
rising occasionally to the surface of the cooking liquid. It is the key to delicious
soups and tender stews because the flavours develop without overcooking the
food. You should also cook egg-based and flourthickened sauces below boiling
point.
• Some tasks, including cooking rice by the absorption method, may require a
setting higher than the lowest setting to ensure the food is cooked properly in
the time recommended.
Searing steak
To cook juicy flavoursome steaks:
1. Stand the meat at room temperature for about 20 minutes before cooking.
2. Heat up a heavy-based frying pan.
3. Brush both sides of the steak with oil. Drizzle a small amount of oil into the hot
pan and then lower the meat onto the hot pan.
4. Turn the steak only once during cooking. The exact cooking time will depend

12
on the thickness of the steak and how cooked you want it. Times may vary
from about 2 – 8 minutes per side. Press the steak to gauge how cooked it is
– the firmer it feels the more ‘well done’ it will be.
5. Leave the steak to rest on a warm plate for a few minutes to allow it to relax
and become tender before serving.
For stir-frying
1. Choose an induction compatible flat-based wok or a large frying pan.
2. Have all the ingredients and equipment ready. Stir-frying should be quick. If
cooking large quantities, cook the food in several smaller batches.
3. Preheat the pan briefly and add two tablespoons of oil.
4. Cook any meat first, put it aside and keep warm.
5. Stir-fry the vegetables. When they are hot but still crisp, turn the cooking
zone to a lower setting, return the meat to the pan and add your sauce.
6. Stir the ingredients gently to make sure they are heated through.
7. Serve immediately.
HeatSettings
The settings below are guidelines only. The exact setting will depend on several
factors, including your cookware and the amount you are cooking. Experiment
with the induction hob to find the settings that best suit you.
Heat setting Suitability
1 - 2 • delicate warming for small amounts of food
• melting chocolate, butter, and foods that burn quickly
• gentle simmering
• slow warming
3 - 4 • reheating
• rapid simmering
• cooking rice
5 - 6 • pancakes
7 - 8 • sautéing
• cooking pasta
9• stir-frying
• searing
• bringing soup to the boil
• boiling water

13
CareandCleaning
What? How? Important!
Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the
glass)
1. Switch the power to the
cooktop off.
2. Apply a cooktop cleaner
while the glass is still warm
(but not hot!)
3. Rinse and wipe dry with a
clean cloth or paper towel.
4. Switch the power to the
cooktop back on.
• When the power to the cooktop is
switched off, there will be no ‘hot
surface’ indication but the cooking
zone may still be hot! Take extreme
care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive
cleaning agents may scratch the
glass. Always read the label to
check if your cleaner or scourer is
suitable.
• Never leave cleaning residue on the
cooktop: the glass may become
stained.
Boilovers, melts,
and
hot sugary spills on
the glass
Remove these immediately
with a fish slice, palette knife or
razor blade scraper suitable for
Induction glass cooktops, but
beware of hot cooking zone
surfaces:
1. Switch the power to the
cooktop off at the wall.
2. Hold the blade or utensil at a
30° angle and scrape the
soiling or spill to a cool area
of the cooktop.
3. Clean the soiling or spill up
with a dish cloth or paper
towel.
4. Follow steps 2 to 4 for
‘Everyday soiling on glass’
above.
• Remove stains left by melts and
sugary food or spillovers as soon
as possible. If left to cool on the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety cover
is retracted, the blade in a scraper
is razor-sharp. Use with extreme
care and always store safely and
out of reach of children.
Spillovers on the
touch controls 1. Switch the power to the cooktop off.
2. Soak up the spill
3. Wipe the touch control area
with a clean damp sponge or
cloth.
4. Wipe the area completely
dry with a paper towel.
5. Switch the power to the
cooktop back on.
• The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you wipe
the touch control area dry before
turning the cooktop back on.

14
HintsandTips
Problem Possible causes What to do
The induction hob
cannot be turned on. No power. Make sure the induction hob is connected to the power supply
and that it is switched on.
Check whether there is a power
outage in your home or area. If
you’ve checked everything and the
problem persists, call a qualified
technician.
The touch controls are
unresponsive.
The controls are locked.
Unlock the controls. See section ‘Using your induction cooktop’ for
instructions.
The touch controls are
difficult to operate. There may be a slight film of water over the controls or you
may be using the tip of your
finger when touching the
controls.
Make sure the touch control area is
dry and use the ball of your finger
when touching the controls.
The glass is being
scratched.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
Use cookware with flat and smooth
bases. See ‘Choosing the right
cookware’.
See ‘Care and cleaning’.
Some pans make
crackling or clicking
noises.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently).
This is normal for cookware and
does not indicate a fault.
The induction hob
makes a low humming
noise when used on
a high heat setting.
This is caused by the technology
of induction cooking.
This is normal, but the noise should
quieten down or disappear
completely when you decrease the
heat setting.
Fan noise coming from
the induction hob. A cooling fan built into your induction hob has come on to
prevent the electronics from
overheating. It may continue to
run even after you’ve turned the
induction hob off.
This is normal and needs no action.
Do not switch the power to the
induction hob off at the wall while the
fan is running.
Pans do not become
hot and appears in the
display.
The induction hob cannot
detect the pan because it is not
suitable for induction cooking.
The induction hob cannot detect
the pan because it is too small
for the cooking zone or not
properly centred on it.
Use cookware suitable for induction
cooking. See section ‘Choosing the
right cookware’.
Centre the pan and make sure that its
base matches the size of the cooking
zone.

15
The induction hob or a
cooking zone has
turned itself off
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating
with one or two digits
in the cooking timer
display).
Technical fault.
Please note down the error letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
FailureDisplayandInspection
If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Problem Possible causes What to do
F3-F8 Temperature sensor failure Please contact the supplier.
F9-FE Temperature sensor of the IGBT
failure.
Please contact the supplier.
E1/E2
Abnormal supply voltage Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
E3/E4 Abnormal temperature Please inspect the pot.
E5/E6
Bad induction hob heat
radiation Please restart after the induction hob cools down.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages
to the induction hob.
Technical Specification
Cooking Hob IKF 160-1
Cooking Zones 4 Zones
Supply Voltage 220-240V~
Installed Electric Power 6400W

16
Product Size L×W×H(mm) 590X520X60
Building-in Dimensions A×B (mm) 560X490
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused by the
heat radiation from the hotplate. As shown below:
L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
590 520 60 56 560 +4
+1 490 +4 +1 50 mini
Under any circumstances, make sure the Induction cooker hob is well ventilated
and the air inlet and outlet are not blocked. Ensure the Induction cooker hob is in
good work state. As shown below
Note: The safety distance between the hotplate and the cupboard above
the hotplate should be at least 760mm.
A
X
X
X
B
L
HD
W
X

17
A(mm) B(mm) C(mm) D E
760 50 mini 20 mini Air intake Air exit 5mm
Before you install the hob, make sure that
• the work surface is square and level, and no structural members interfere with
space requirements
• the work surface is made of a heat-resistant material
• if the hob is installed above an oven, the oven has a built-in cooling fan
• the installation will comply with all clearance requirements and applicable
standards and regulations
• a suitable isolating switch providing full disconnection from the mains power
supply is incorporated in the permanent wiring, mounted and positioned to
comply with the local wiring rules and regulations.
The isolating switch must be of an approved type and provide a 3 mm air gap
contact separation in all poles (or in all active [phase] conductors if the local
wiring rules allow for this variation of the requirements)
• the isolating switch will be easily accessible to the customer with the hob
installed
• you consult local building authorities and by-laws if in doubt regarding
installation
• you use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the
wall surfaces surrounding the hob.
When you have installed the hob, make sure that
• the power supply cable is not accessible through cupboard doors or drawers
A
BE
C
D

18
• there is adequate flow of fresh air from outside the cabinetry to the base of the
hob
• if the hob is installed above a drawer or cupboard space, a thermal protection
barrier is installed below the base of the hob
• the isolating switch is easily accessible by the customer
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not
apply force onto the controls protruding from the hob.
Adjusting the bracket position
Fix the hob on the work surface by screw 2 brackets on the bottom of hob(see
picture) after installation.
Adjust the bracket position to suit for different table top thickness.
Cautions
1. The induction hotplate must be installed by qualified personnel or technicians.
We have professionals at your service. Please never conduct the operation by
yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer,
washing machine or clothes dryer, as the humidity may damage the hob
electronics
3. The induction hotplate shall be installed such that better heat radiation can be
ensured to enhance its reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to
heat.