SC&T PR1616-12R User manual

Smart Cabling & Transmission Corp.
V1.0
Power Rack
User Manual
Model : PR1616-12R
16 Amp 16 Port DC12V Regulated Power Supply with 2 Fans in
1U Rack

1
User Manual
PR1616-12R
Introduction
PR1616-12R is a power supply in a 19” standard 1U rack, which can transform AC120V or 230V to 16 ports of
regulated DC12V 1.1A output. It's a perfect power supply for numbers of cameras, housing, pan tilt turning
devices or other surveillance equipment in a security center.
Features
Built-in NFB to avoid current overload.
Built-in PTC fuse for overcurrent and resettable protection on each port.
Built-in a fan at front and back panel to lower the operating temperature.
Installation View
Caution for Operation
1. The power center has built-in auto reset able fuse on each port. The device will open while it is
in short condition. Please check the system to find out what caused short and solve it. The
device will auto reset after the problem has been solved.
2. Caution: connect only one device to one port, never connect one device to two different ports,
or it will lose protection. (See below drawing)

2
User Manual
PR1616-12R
Specification
ITEM NO.
PR1616-12R
Support
Output Voltage
DC12V (Regulated)
Output Current
1A/ Port
Output Trip Current
1A/ Port
Short Cut Time
0.2 Sec/ Port
Cut Current / Time
2.5A/ 4 sec
Resettable Output/ Time
Auto/ 1 sec (Min)
Total Output Current
16A (Max)
Ports & Interfaces
Power Input
1 x Power Core
Power Output
16 x 2-pin Terminal Block
Fan
2 x Fan, Speed: 5200 RPM, Current: 0.03 A, Power: 0.4W
Ambient Temperature
Operation
-10 to 45℃
Storage
-30 to 70℃
Humidity
up to 95%
Physical Characteristics
Dimensions
437 x 170 x 44mm
Weight
3100g