SC&T PR801-12R User manual

Smart Cabling & Transmission Corp. V1.0
Power Rack
User Manual
Model : PR801-12R
8 Amp 1 Port DC12V Regulated Power Supply in 1U Rack

1
User Manual
PR801-12R
Introduction
PR801-12R is a power supply in a 19” standard 1U rack, which can transform AC120V or 230V to regulated
DC12V output. It's a perfect power supply for numbers of cameras, housing, pan tilt turning devices or
other surveillance equipment in a security center.
Features
Built-in NFB to avoid current overload.
Installation View
Caution for Operation
1. PR801 -12R built-in short protection circuit, the device will open while it is in short
condition. Please check the system to find out what caused short. After the problem has been
solved, reset the power switch and then the system will operate properly.
Caution
Connect only one device to one port, never connect one device to two different ports, or it will lose
protection. (See below drawing)

2
User Manual
PR801-12R
Specification
ITEM NO.
PR801-12R
Support
Output Voltage
DC12V (Regulated)
Output Current
8A
Output Trip Current
X
Short Cut Time
1 sec
Cut Current / Time
X
Resettable Output
Manual
Total Output Current
8A (Max)
Ports & Interfaces
Power Input
1 x Power Core
Power Output
1 x 2-pin Terminal Block
Ambient Temperature
Operation
-10 to 45℃
Storage
-30 to 70℃
Humidity
up to 95%
Physical Characteristics
Dimensions
437 x 170 x 44mm
Weight
4000g