Scarlet Tech TWL-1S User manual

!
!
TWL-1S
Heat Stress Meter
User Guide
SCARLET TECH

Instrument at a Glance 3
Heat stress index 3
Instrument 3
Sensors 4
Buttons 4
Display 5
Getting Started 6
Before using 6
Meter setup 6
Pager setup (optional) 6
Operation 7
On/off7
Measurements 7
TWL 7
Timer 8
Wireless paging (optional) 8
Battery 8
Data Logger 9
Step1: Conguration 9
Step2: Data logging 9
Step3: Download data 9
Calibration 10
Accessory 11
Polypropylene lter 11
USB cable 11
Pager (optional) 11
Technical Specification 12
Instrument 12
Wireless paging (optional) 13
Standard 13
Thermal Work Limit (TWL) 13
Safety, Handling, & Maintenance 14
Important safety information 14
Important handling information 14
Standard packing 14
Warranty & Services 15
Warranty conditions 15
Services 15
2

Instrument at a Glance
Heat stress index
Heat illnesses can be fatal. However, with proper precautions, it can be avoided. Thermal Work Limit
(TWL) is a heat index calculated from environmental parameters, including dry bulb temperature,
wet bulb temperature, globe bulb temperature and wind speed and accommodates for clothing
factors as well as human physiological status to estimate a safe maximum continuous suitable
metabolic rate. It is designed primarily for self-paced workers who are well hydrated and
acclimatized in the working condition.
Instrument
TWL-1S Heat Stress Meter offers a compact-designed hardware with deliberate software and user-
friendly interface. 3-color backlight based on TWL index informs users the risk level.
Work break timer reminds users the work/rest schedule and actively notifies the remote pager
(optional )when it counts down to zero.
1
!
Please contact sales representative for wireless paging function.
1
3
Power
Mode
TWL
Black bulb
Temperature &
humidity sensors!
inside
Backlight
Timer
Page (optional)
Wind cup
LCD display

Sensors
There are four different types of sensors in TWL-1S.
Temperature sensor A high dynamic range NTC style thermistor is installed inside of the neck along
with the humidity sensor.
Humidity sensor A capacitive humidity sensor in installed inside of the neck to be well protected by
the case and the filter. See more details in the section “Polypropylene Filter”.
Globe temperature A high dynamic range NTC style thermistor is located in the center of the black
copper sphere to measure the radiative heat comes from heat source like sunlight or oven.
Anemometer Wind cups and high quality bearing make the anemometer very effective. Starting
wind speed is as low as 0.5 m/s. Wind cups detect wind strength at all times, regardless of the
orientation and position of the instrument.
Buttons
The functionality of the TWL-1S is controlled by the buttons in the front panel.
4
Icon
Button
Functions
POWER
Turn on/off the device.
MODE
Switch among measurements.
TWL
Trigger a measurement of TWL heat index
BACKLIGHT
Turn on the backlight.
TIMER
Set up count down timer per measured TWL value.
PAGE
Send a signal to notify remote pager. This is optional.

Display
The large size LCD display shows the readings of sound level also the icons to present the current
measure mode and the status of the instrument:
5
Mode indication
Readings &!
units
Timer digits
Heat risk indicator & !
battery level
Icon
Meaning
Dry bulb temperature (air temperature).
Wet bulb temperature. Calculated from dry bulb temperature and rh%.
Globe temperature.
Wind speed.
Relative humidity.
Wet Bulb Globe Temperature. WBGT = 0.7 x WET + 0.2 x GLB + 0.1 x DRY.
Thermal Work Limit. TWL is calculated according to evidence-based medicine.
High risk indication. Displayed when TWL < 115.
Medium risk indication. Displayed when 115 < TWL < 140.
Low risk indication. Displayed when TWL > 140.
Very low risk indication. Displayed when TWL > 210.
Battery level. Change batteries when it is empty.

Getting Started
Before using
Make sure your TWL-1S is in good condition and within factory calibration.
Meter setup
‣Insert 4 AAA batteries into the battery holder with proper orientation.
‣Long press PWOER button to turn on TWL-1S.
‣Place the meter on a tripod, preferably 1 m above the ground, for proper placement.
‣Press MODE key to toggle among 7 modes.
‣Press TWL key to calculate a TWL value.
Pager setup (optional )
2
Insert 1 AA battery into the battery holder with proper orientation. The pager beeps once when it is
ready.
Please contact sales representative for wireless paging function.
2
6
NOTE: Expose the meter to the environment at least 10 min to reach equilibrium for any
significant changes in temperature and humidity (e.g. indoor to outdoor and vice versa).

Operation
For explanatory purpose, all icons are presented in the section “Display”. However, during daily
operation, only part of these icons is displayed.
On/off
Long press POWER button to turn on or off the device. When left without any operation for 15 min,
the device turns off automatically.
Measurements
Press MODE button to toggle among 7 modes. It shows real time value for 6 modes
•Dry bulb temperature
•Wet bulb temperature
•Globe temperature
•Wind speed
•Humidity
•WBGT
Based on TWL theory, real time value of TWL is not practical. Averaged data is more presentative to
show user the condition of the environment. TWL calculation is only triggered by pressing TWL
button.
TWL
Before any measurement, the TWL mode shows - - - . - W/m2.
Trigger a measurement Press TWL button to calculate a TWL value. It takes 2 min to compute a TWL
value because 2-min average is more representative than a snapshot.
Check out the screen When calculating a TWL value, the screen shows average wind speed from the
1st second to current moment. When calculating, TWL icon blinks and a countdown timer shows the
time remains.
Finish measurement When the calculation is done, a TWL value and correspondent risk icon shows
alone with the suggested work time as indicated in Table 1.
Backlight
Press BACKLIGHT button to turn on the colorful backlight of the LCD. The color corresponds with
the TWL range and risk (Table 1). Before any TWL value is calculated, pressing BACKLIGHT key only
flashes - - - . - twice.
7

Timer
Short pressing TIMER button sets the timer. Long pressing TIMER starts/ends the timer. This button
only works in High Risk (Red) zone as green and yellow zones do not have work time limits.
Wireless paging (optional )
3
Trigger Press PAGE key to call the remote pagers. Paging signal covers 200 meters on average, but
the coverage varies with topology.
Pager When triggered by TWL-1S, the pager beeps and vibrates. Press the side button to stop. Both
red zone and the expiration of work timer trigger the pager 3 times with 1min interval.
Battery
Alkaline batteries can sustain more than 120 hours when operated continuously. Dry batteries and
rechargeable batteries are also applicable but with shorter lifetime. Download data when the
battery bar is empty, otherwise some data might be lost.!
Please contact sales representative for wireless paging function.
3
8

Data Logger
Step1: Configuration
‣Download TWL-1S app (TWLIT) from www.scarlet.com.tw.
‣Install the app on PC or laptop following the instructions.
‣Turn on the device and connect it to the PC or laptop by the USB cable.
‣Launch'the'app'and'set logging interval (minimum 10 min).'
‣Disconnect the meter from the computer, and TWL-1s is ready for data logging.
Step2: Data logging
‣Long press MODE key to turn on data logging mode and the meter displays SUrE.
‣Press MODE key, if you agree to enter the data logging mode.
‣Press TIMER key, if you do NOT agree to enter the data logging mode.
‣When the screen shows rEC, the device is collecting and recording data; Idle means no data are
recorded.
‣Long press TIMER key to quit data logging mode.
Step3: Download data
‣Connect to the computer to download the data via the app you installed in the step 1.!
9

Calibration
Calibration drift happens over time. Regular recalibration is necessary to ensure the accuracy of the
measurement.
Humidity sensors can be calibrated using the RH calibration kit which includes saturated salt
solutions and two sealed containers. We suggest that you have the humidity sensor calibrated every
6 months. Please contact the sales representatives for RH calibration kit, instruction and services.
Temperature sensors (dry air and globe bulb) typically do not require recalibration because the
calibration drift is negligible during the product lifetime.
Wind speed is calibrated against an intermediary standard calibrated under MEASNET cup
anemometer calibration procedure before it leaves the factory. However, we recommend that you
have the anemometer checked every 6 month. Please contact the sales representatives for wind
speed test and bearing replacement. !
10

Accessory
Polypropylene filter
A polypropylene (PP) fiber is applied to protect the temperature and humidity sensors from dust
while allowing water vapor (moist humid air) to pass through. It is suggested to replace the PP filter
every 2-6 months depending on the usage condition. Please contact the sales representatives if you
wish to change the filter.
USB cable
A mini-B to standard-A USB cable is in the standard package to connect the device and PC or laptop
for configuring instrument and downloading data. More details are in the section “Data Logger”.
Pager (optional)
Please contact sales representative for wireless paging function. !
11

Technical Specification
Instrument
12
Temperature sensor
Range 0…50° C
Resolution 0.1° C
Accuracy ±0.6° C
Globe bulb sensor
Range 0…80° C
Resolution 0.1° C
Accuracy Indoor ±1.0° C (15…40° C); ±1.5° C (others)
Accuracy Outdoor ±1.5° C (15…40° C); ±2.0° C (others)
Humidity sensor
Range 5…95%
Resolution 0.1%
Accuracy ±3% (25° C, 10…90%); ±5% (others)
Wind speed sensor
Range 0.5…10 m/s
Resolution 0.1 m/s
Accuracy ±(2% of readings + 0.2) m/s
WBGT formula
Indoor WBGT = 0.7 x Tw + 0.3 x Tg
Outdoor WBGT = 0.7 x Tw + 0.2 x Tg + 0.1 x Ta
TWL calculation
Dynamic calculation based on Tw, Tg, Taand ws. Safe max. Tcore < 38.2 °C
Display
32(W) x 50(H) mm LCD screen
Backlight
Yes. Color depends on TWL measurement
Power supply
4x AAA batteries supply 6V
Power consumption
6 mA with backlight off
Battery indicator
Yes
Battery life
120 hr with alkaline batteries
Dimension
59(W) x 37(D) x 316(H) mm
Globe bulb 75 mm diameter
Wind cup 91 mm rotation radius
Weight
330 g
Enslosure
ABS
Standard
CE-compliant
Sensor protection
Polypropylene filter
Operating range
-10…60 °C
Logger memory
2,000 readings
Standard accessory
Tripod x 1, AAA battery x 4, USB cable x 1, toolbox x 1
Calibration kit
Optional. MgCl2and NaCl O-ring sealed bottles
Storage condition
20…40 °C

Wireless paging (optional)
By installing RF transmitter, TWL-1S will be able to send signal to remote pagers. 433 MHz
technology is used to achieve 200 meters range in an open space. Following table is the pager
specification.
Standard
CE certificate Instrument is certified by CE mark following the EN 61326-1:2006 Electrical
Equipment for Measurement, Control and Laboratory Use.
SGS test report A third party certification for its temperature and humidity sensors from SGS, a
globally renowned company for inspection, verification, testing and certification. #
Thermal Work Limit (TWL)
13
Pager frequency
433 MHz
Pager dimension
51(L) x 74(W) x 28(H) mm
Pager weight
76g
Alarm loudness
85db @ 10 cm
Pager power
1x AA batteries

Safety, Handling, & Maintenance
Important safety information
Operate Avoid using instrument in the rain. Avoid using meter in presence of explosive gas,
combustible gas, steam or excessive dust.. Be sure to turn it off after use. If you expect not to use the
instrument for a long period remove batteries to avoid leakages of battery liquid which could
damage the its inner components.
Handling Handle the meter with care. It is made of sensitive electronic components. The meter can
be damaged if dropped, burned, punctured, or crushed, or if it comes in contact with liquid. Don’t
use a damaged meter, such as one with a cracked screen, as it may cause injury.
Important handling information
Do not twist black ball The neck part of the instrument will be damaged if one twist the black ball.
Battery replacement Low battery icon showed on LCD indicates users to replace batteries:
•Turn off the instrument.
•Remove the battery cap.
•Insert new batteries and then put the cap back.
•Process the waste batteries accordingly.
Standard packing
•Heat Stress Meter x1
•User guide x1
•Tripod x1
•Certificate of Conformity x1
•USB cable x1
•AAA battery x4
14
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other
injuries, or damage to sound level meter or other property. Read all the safety information below
before using the instrument.
WARNING: Do not hold and twist the black bulb. The neck part of the instrument will be damaged
and the temperature and humidity sensors inside of the neck will be broken.

Warranty & Services
Warranty conditions
This instrument is guaranteed for one year against material or production defects, in accordance
with our general sales conditions. During the warranty period the manufacturer reserves the right to
decide either to repair or replace the product.
Should you need for any reason to return back the instrument for repair or replacement take prior
agreements with the local distributor from whom you bought it. Do not forget to enclose a report
describing the reasons for returning (detected fault). Use only original packaging. Any damage
occurred in transit due to non-original packaging will be charged anyhow to the customer.
The warranty doesn’t apply to:
Accessories and batteries (not covered by warranty)
Repairs made necessary by improper use (including adaptation to particular applications not
foreseen in the instructions manual) or improper combination with incompatible accessories or
equipment.
Repairs made necessary by improper shipping material causing damages in transit.
Repairs made necessary by previous attempts for repair carried out by non-skilled or unauthorized
personnel.
Instruments for whatever reason modified by the customer himself without explicit authorization of
our Technical Dept.
The contents of this manual may not be reproduced in any form whatsoever without the
manufacturer’s authorization.
Our products are patented. The logotypes are registered. We reserve the right to modify
characteristics and prices as part of technological developments which might require them.
Services
Shouldn’t the instrument work properly, before contacting your distributor make sure that batteries
are correctly installed and working, check the test leads and replace them if necessary.!
15

Scarlet Tech Co., Ltd.
© 2015 Scarlet Tech Co., Ltd. All rights reserved.
4F-3, No. 347 , HePing E Rd, 2nd Sec,
DaAn District, Taipei City 106, Taiwan
E-mail: [email protected]
http://www.scarlet.com.tw