Scarlet Tech WindPro User manual

WindPro
User Guide
Wireless Anemometer

Page Contents
2
3
4
7
9
20
20
20
21
22
22
22
23
24
25
25
26
26
27
30
Introduction
Packing Contents
Overview
Technical Specification
Operation Interface
IInstallation and Setup
WindPro Sensor Installation
Console Installation
Console Setup
Settings
Measurements Offset
Alarm
Relays
Data Logging
Serial Output
Mobile App
4-20mA Output
Restore to Factory Setting
Scarlet Web Portal (OPTIONAL)
Safety, Maintenance, & Warranty

Introduction
2
WindPro Online is the ultimate IoT solution to enhance operational safety.
Users can access site-specific data remotely, set wind speed and wind direction alerts, and
integrate with external devices for control and data acquisition via various outputs. The
main hardware consists of a long-range wireless wind sensor and a control console. Users
can opt-in to Scarlet Web Portal to access live and historical data, received remote safety
alerts, and oversee hardware status anytime, anywhere.
Mobile app for live data
& safety alarm
Support 2 sensors connection
2.4G Wireless
4-level configurable wind
alarm thresholds for
external devices control
WindPro Utility for PC’s live
data & alarm, integrable
with display signs
RS232
Export recorded
data to Excel
USB
Wind speed & direction
analog outputs for
control & data
acquisition
4-20mARelay Switches
(Sub-1 GHz)
Scarlet Web Portal
Wireless Wind Sensor WindPro Control Console
RF Wireless Wi-Fi
Ethernet
or

Packing Contents
▪WindPro console
▪WindPro Antenna x2
▪WL-21 Sensor
▪Wind Cups
▪Magnetic Sensor Mounting bracket & L-shape Hex Key
▪Magnet Holder Kit & Quick Release Coupler for WindPro console
▪Power Adapter
▪User Manual & CoC
3
WL-21
Sensor Wind Cups
WindPro WindPro
Antenna x2
Power
Adapter
WL-21 Bracket &
L-shape Hex Key Waterproof
Case

Overview
20/18/10/SL
WindPro
Sub-1 Ghz Antenna
Sub-1 Ghz Antenna
Sub-1 Ghz Antenna
USB Type C Port
Reset Button
Power Jack
Power On/Off Button
Mute Channel 1 Button
Mute Channel 2 Button
RS232 Port
LAN Port
Channel 1 Connection Status
Channel 2 Connection Status
LAN Connection Status
Wi-Fi Connection Status
2.4Ghz Wireless
Broadcasting On/Off Status
Channel 1 Alarm &
Relay 1~4 Status
Buzzer
[ Front View ]
[ Left & Right Sides ]
4
Channel 2 Alarm &
Relay 1~4 Status

WS
WS
WD
WD
RELAY
VCC GND
1 2 3 4 VCC GND
CH1
RELAY
4-20mA
4-20mA
CH2
CH1
CH2
1 2 3 4
SN:2301WP0025
AD:25 WINDPRO CONTROL CONSOLE
Channel 1 4-20mA Wind Speed
Channel 2 4-20mA Wind Speed
Channel 2 4-20mA Wind Direction
Channel 1 Power Output
(Vcc/Ground)
Channel 2 Power Output
(Vcc/Ground)
Channel 1 4-20mA Wind Direction Channel 1 Relay 1~4
Channel 2 Relay 1~4
Product Info Label
[ Bottom View (Terminal Block) ]
[ Rear View ]
5
1/4 Threaded Hole

Wind Cups
Wind Speed Sensor
Temperature & Atmospheric Pressure Sensor
Sensor Body
Wind Vane
6
Sensor WL-21
Wireless Connection
Each Wind Sensor has a unique wireless address number pre-paired corresponding to the channel 1
of Control Console. Users can add a 2nd wind sensor to the Control Console channel 2 to monitor
the wind data, received alerts, and control external devices from both sensors at the same time.
Wireless Transmission
The Sensor and Receiver are connected through Sub-1GHz wireless band (868/915/933 MHz). The
signal strength is display on the Receiver and Web Portal’s top corners. For optimal wireless
transmission, please make sure the Sensor and Console are in an unobstructed line of sight and are
not positioned directly above or below each other.

Technical Specification
7
WindPro
Item
Dimension
Weight
Display
Wireless Technology
Connector
Button
Power
LED Indicator
Housing Material
Waterproof
Description
185 x 126 x 65mm
700g
Touchscreen LCD 4.3” (480 x 272)
Sensor: 868 / 915 / 933MHz (Up to 850m in open space)
Internet: Wi-Fi 802.11 b/g/n
Mobile APP: 2.4GHz Broadcasting
SMA x2
RJ45 x1
RS232 x1
USB Type C x1
Power Jack x1
4-20mA x4 sets
Relay x8 sets
VCC GND x2 set
Power On/Off x1
CH1 Mute x1
CH2 Mute x1
Input (Power Jack): AC 100-240V
Output (VCC GND): DC 24V
Channel Status x2
LAN Status x1
Wi-Fi Status x1
2.4GHz Wireless Status x1
Alarm x8
PA6+35%GF
N/A

Sensor WL-21
Wind Speed
Temperature
Atmospheric Pressure
8
Item
Dimension
Weight
Battery
Housing Material
Waterproof
Description
262.5 x 183.5 x32mm
406g
3.6V 18505 Lithium battery x1 (3 years)
PA6
IP67
Item
Measurement Unit
Measurement Rage
Measurement Resolution
Measurement Accuracy
Description
m/s (default), knots, MPH, km/hr, ft/s
0.3…50 m/s
0.1 m/s, 0.1 knots, 0.1 MPH, 0.1 km/hr, 0.1 ft/s
±2%
Item
Measurement Unit
Measurement Rage
Measurement Resolution
Measurement Accuracy
Description
℃ (default), ℉
-30℃ ~ 60℃
0.1℃, 0.1℉
±1℃
Item
Measurement Unit
Measurement Range
Measurement Resolution
Measurement Accuracy
Description
hPa, atm, mmHg, bar, Pa, inHg
500-1100 hPa
1 hPa, 0.001 atm, 0.01 mmHg, 0.001 bar, 100 Pa, 0.01 inHg
±0.4 hPa

9
Operation Flow
SETTINGS Page
Operation Interface
Press the Power button, to turn on WindPro and enter the HOME page (CH1 INFO). Swipe right /left
on the touch screen to go to the other pages as shown on diagram below:
In SETTINGS, the user can press icon back to HOME page, or select options below to go to
different setting pages.
SETTINGS Page
Home Page
(CH1 INFO Page)
CH1 & CH2
INFO Page
CH2 INFO Page
SENSOR PAIRING Page
CHANNEL 1 Page
CHANNEL 2 Page
ALARM Page
DATA Page
CONNECTIVITY Page
4-20mA Page
GENERAL Page
CALIBRATION Page

34.9
m/s
-12HR-1HR
20.1
760.00
27.2
6.1
ALARM: 15/25
CHILL: 18°C
mmHg
NW
340°
LV.5
MAX
AVG
AIR PRESSURE
TEMPERATURE
DIRECTIONWIND SPEED
34.9
m/s
ALARM: 20/18/10/SL
LV.9
WIND SPEED
CHART
16/08/2022 18:27 -10dBi
CH 1
CH 2
REC
27.2
6.1
1
AVGMAX
10
CH1 INFO / CH2 INFO page
1
6
9
3 4 52
10
11
12
13
7
8
Name
Wireless Signal Status
Channel 1/2 Status
Mute Status
Data Logging Status
Date & Time
Wind Speed
Beaufort scale
Wind Speed Historical
Chart
Alarm Threshold and Type
Wind Direction
Maximal & Average Wind
Speed
Temperature & Wind Chill
Air Pressure
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Definition
Wireless signal strength between WindPro & sensor
The current channel number with the sensor’s battery status
(connected to sensor#1 or sensor#2)
Mute ON or OFF of this channel
Data logging ON or OFF of this channel
Current device date and time of this WindPro
The channel’s current wind speed value. Red background indicates
the wind speed exceeds the set threshold
The channel’s current Beaufort wind force scale (12 levels in total)
The channel’s maximum & average wind speed with hourly wind chart
from the past 12 hours
The alert thresholds of Alarm 1/ Alarm 2/ Alarm 3/ Alarm 4
First 3 Alarm are wind speed values. Alarm 4 can be set to wind speed,
wind direction or sensor connection status
Current wind direction of this channel
The channel’s maximum & average wind speed since this WindPro
power-on
Current temperature and wind chill of this channel
Current air pressure of this channel

WIND SPEED WIND SPEED
LV.5 LV.1
20/18/10/SL 30/20/10/SL
NW 340°
21.6 7.3
m/s
20.1 °C S180°
m/s
-9.0 °C
18:27
CH 2
RECREC
1 2
27.2
6.1
14.9
2.8
CH 1
11
CH1&2 INFO page
1 3 13115 14 1542 12
6
8
10
9
7
16
17
18
19
20
21
Name
Channel 1 Wireless Signal Status
Channel 1 Status
Channel 1 Mute Status
Channel 1 Alarm Threshold and Type
Channel 1 Data Logging Status
Channel 1 Wind Speed
Channel 1 Beaufort scale
Channel 1 Wind Direction
Channel 1 Temperature & Wind Chill
Channel 1 Wind Speed Historical
Chart
Channel 2 Wireless Signal Status
Channel 2 Status
Channel 2 Mute Status
Channel 2 Data Logging Status
Date & Time
Channel 2 Alarm Threshold and Type
Channel 2 Wind Speed
Channel 2 Beaufort scale
Channel 2 Wind Direction
Channel 2 Temperature & Wind Chill
Channel 2 Wind Speed Historical
Chart
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Definition
Wireless signal strength between WindPro & sensor 1
Sensor and battery status of channel 1
Mute ON or OFF of channel 1
Alarm 1, 2 and 3 are wind speed threshold and alarm 4 can be wind speed,
wind direction or sensor connection status of channel 1.
Data logging ON or OFF of channel 1
Current wind speed of channel 1. If the wind speed is over threshold, the
background will become red.
Current Beaufort scale of channel 1
Current wind direction of channel 1
Current temperature and wind chill of channel 1
Historical wind speed data chart in past 12 hours of channel 1. It also shows
the maximal and average value during this period.
Wireless signal strength between WindPro & sensor 2
Sensor and battery status of channel 2
Mute ON or OFF of channel 2
Data logging ON or OFF of channel 2
Current device date and time of this WindPro
Alarm 1, 2 and 3 are wind speed threshold and alarm 4 can be set to wind
speed, wind direction or sensor connection status of channel 2.
Current wind speed of channel 2. If the wind speed is over threshold, the
background will become red.
Current Beaufort scale of channel 2
Current wind direction of channel 2
Current temperature and wind chill of channel 2
Historical wind speed data chart in past 12 hours of channel 1. It also shows
the maximal and average value during this period.

12
SETTINGS page
SENSOR PAIRING
CHANNEL 1 MEASUREMENTS OFFSET
ALARM
CHANNEL 2 MEASUREMENTS OFFSET
SETTINGS
CALIBRATION
CONNECTIVITY
DATA
4-20mA
GENERAL
1
2
3
4
5
7
8
9
10
6
Name
Sensor Pairing
Channel 1
Measurements offset
Channel 2
Measurements offset
Alarm
Data
Connectivity
4-20mA
General
Calibration
Home
Item
1
2
3
4
5
6
7
8
9
10
Definition
Pair wireless sensor to channel 1 or 2
Set Sensor 1’s wind data averaging period, offset, and wind
direction correction
Set Sensor 2’s wind data averaging period, offset, and wind
direction correction
Alarm and relay related settings for channel 1 & 2
Data recording settings and storage management
Network, wireless, and cloud related settings
4-20mA related settings
Time, measurement units, and device information
Wind speed calibration setting
Back to HOME page

SPEED & DIRECTION
18
SENSOR ADDRESS
SENSOR TYPE
CHANNEL 1 SENSOR ADDRESS
BACK
13
SENSOR PAIRING page
Name
Sensor Type
Sensor Address
Item
1
2
Definition
Speed only (WR-3 Plus Sensor)
Speed & Direction (WL-21 Sensor)
Connect to the wireless sensor with the set address number
1
2
SENSOR BATTERY STATUS: NORMAL
LAST CORRECTION RECORD
10/01/2022 13:59:45
2 SEC
-15%
WIND SPEED
WIND DIRECTION
CHANNEL 1 MEASUREMENTS OFFSET
DATA AVERAGING PERIOD
VELOCITY OFFSET
WIND SPEED (CHANNEL 1)
DIRECTION CORRECTION
WIND DIRECTION (CHANNEL 1)
BACK
BACK
BACK
CHANNEL 1&2 MEASUREMENTS OFFSET
1
2
3
4
Name
Sensor Averaging Period
Velocity Offset
Direction Correction
Last Correction Record
Item
1
2
3
4
Definition
Set the averaging period of wind speed measurement
showing on the CH1/CH2 INFO page.
Set the offset value for wind speed measurement showing
on the CH1/CH2 INFO page.
Correct the wind direction of the sensor
Date of the last time the wind direction sensor correction

14
ALARM Page
ALARM 1 WIND SPEED (RELAY 1)
ALARM 2 WIND SPEED (RELAY 2)
CHANNEL 1 ALARM
ALARM 3 WIND SPEED (RELAY 3)
ALARM 4 USER-DEFINED (RELAY 4)
CHANNEL 1 SOUND ALARM
TRIGGER SINGLE RELAY
BACK
30.0
20.0
10.0
SL
25.0
2 SEC
2 SEC
SPEED THRESHOLD
ON DELAY (RESPONSE TIME)
CHANNEL 1 ALARM 1 WIND SPEED (RELAY 1)
OFF DELAY (RETRIEVAL TIME)
REVERSE (INVERTER)
BACK
350°-359°
WIND DIRECTION ZONE
Direction
2 SEC
2 SEC
ALARM TYPE
ON DELAY (RESPONSE TIME)
CHANNEL 1 ALARM 4 USER-DEFINED (RELAY 4)
OFF DELAY (RESTRIEVAL TIME)
BACK
1
3
4
5
6
7
8
2
Name
Sound Alarm Mute
Trigger Single Relay
Speed Threshold
On Delay
Off Delay
Reverse/Inverter
Alarm Type
Wind Direction Zone
Item
1
2
3
4
5
6
7
8
Definition
Mute the channel sound alarm (Default: ON)
Trigger single for relay this channel. (Default: OFF)
ON: Triggered only one relay while the wind speed value
over/under the highest/lowest threshold;
OFF: Triggered multiple relays while the wind speed value
over/under the set thresholds.
Set the wind speed alarm threshold
Alert when threshold is triggered after the set time
Extend the alarm duration
Reverse the wind speed alarm threshold of this channel.
(Default: OFF)
ON: alarm triggered while the wind speed is UNDER the
threshold;
OFF: the alarm triggered while the wind speed is OVER the
threshold.
Set alarm triggered event type for Relay 4 (wind speed, wind
direction, or sensor signal loss).
Set Relay 4’s wind direction alert zone.

CHANNEL 1 LOG LIST
DATA
LOGGING
CHANNEL 2 LOG LIST
DELETE ALL CHANNEL 1 DATA
DELETE ALL CHANNEL 2 DATA
DELETE ALL DATA
AVAILABLE MEMORY
BACK
ON DD
03
MM
03
YYYY
2022
START TIME
00:00
CH/AD
1/23
03 03 2022 00:00 1/23
04 03 2022 00:00 1/47
05 03 2022 00:00 1/47
06 03 2022 15:23 1/47
07 03 2022 22:15 1/80
CHANNEL 1 LOG LIST
BACK
PORTAL VALIDATION: DD/MM/YYYY HH:MM:SS
CONNECT TO PORTAL
ETHERNET
Wi-Fi
CONNECTIVITY
RS232
2.4G WIRELESS BROADCASTING
BACK
15
DATA LOGGING Page
CONNECTIVITY Page
1
2
3
4
Name
Logging
Channel 1/2 Log List
Delete All Channel 1/2
Data & All Data
Available Memory
Item
1
2
3
4
Definition
Control Console’s data recording function (Default: ON)
Show the list of current log files of channel 1 & 2
Item
1
2
3
4
5
6
Definition
Go to Ethernet connectivity setting page for LAN port
Go to Wi-Fi connectivity setting page for wireless connection
Go to RS232 connectivity setting page for PC utility
Go to 2.4G Wireless connectivity setting page for mobile App
Connect or disconnect to WindPro Web Portal
The last validate date device connected to Web Portal
1
2
3
4
5
6
Name
Ethernet
Wi-Fi
RS232
2.4G Wireless Broadcasting
Connect to Portal
Portal Validate Date

16
ETHERNET page
Name
Obtain IP Automatically
(DHCP)
Use below IP Address
Obtain DNS
Automatically (DHCP)
Use below DNS Server
Address
Item
1
2
3
4
Definition
The device will get the IP address automatically if connect-
ing to network.
Set the IP address of this device manually.
The device will connect the DNS automatically if connecting
to network.
Set the DNS server address of this device manually.
SUBNET MASK 255.255.255. 0
DEFAULT GATEWAY 192.168.100.254
192.168.100.101
OBTAIN IP AUTOMATICALLY (DHCP)
192.168.100.101
OBTAIN DNS AUTOMATICALLY (DHCP)
192.168.100.101
ETHERNET (TCP/IP)
USE BELOW IP ADDRESS
IP ADDRESS
BACK
ALTERNATE DNS SERVER 255.255.255. 0
192.168.100.101
USE BELOW DNS SERVER ADDRESS
PREFERRED DNS SERVER
1
2
3
4

Name
Wi-Fi Connectivity
Wi-Fi SSID
Wi-Fi Network
Add a New Network
Forget Network
Advanced Wi-Fi Settings
Name
Data Rate
Data Bits
Parity
Stop Bit
Flow Control
17
Wi-Fi page
RS232 page
Item
1
2
3
4
5
6
Definition
Switch ON or OFF of Wi-Fi connectivity of this device.
Show Wi-Fi SSID connected
Search and add this device to one existed W-Fi SSID.
Manually connect this device to one hidden Wi-Fi SSID.
Reset Wi-Fi network settings
Set TCP/IP setting of Wi-Fi connectivity as Ethernet page.
Item
1
2
3
4
5
Definition
Go to setting page to select different data rate
Show data bits setting (Default: 8)
Go to parity setting page
Go to stop bit setting page
Show flow control setting (Default: None)
ON
Wi-Fi NETWORK
Wi-Fi CONNECTIVITY
ADD A NEW NETWORK
FORGET NETOWRK
Wi-Fi
ADVANCED Wi-Fi SETTINGS
Scarlet
BACK
SUBNET MASK 255.255.255. 0
DEFAULT GATEWAY 192.168.100.254
192.168.100.101
OBTAIN IP AUTOMATICALLY (DHCP)
192.168.100.101
OBTAIN DNS AUTOMATICALLY (DHCP)
192.168.100.101
Wi-Fi TCP/IP
USE BELOW IP ADDRESS
IP ADDRESS
BACK
ALTERNATE DNS SERVER 255.255.255. 0
192.168.100.101
USE BELOW DNS SERVER ADDRESS
PREFERRED DNS SERVER
1
2
3
4
ON
DATA RATE
DATA BITS
RS232
PARITY
115200
NONE
STOP BIT 1
FLOW CONTROL NONE
8
BACK
1
2
3
4
5

Name
Channel 1/2 4mA/20mA
4mA/20mA Output Speed (m/s)
4mA/20mA Output Direction (m/s)
18
2.4GHZ WIRELESS BROADCASTING page
4-20MA page
Item
1
2
3
Definition
Go to Channel 1 or 2 4mA/20mA setting page.
Set the 4mA/20mA trigger point of wind speed
(unit: m/s).
Set the 4mA/20mA trigger point of wind direction.
2.4GHZ WIRELESS BROADCASTING
DISPLAY NAME
2.4GHz WIRELESS BROADCASTING
2211WP0146
BACK
1
2
Name
2.4GHz Wireless Broadcasting
Display Name
Item
1
2
Definition
Switch ON or OFF of 2.4GHz wireless broadcasting of this
device
Device’s name showing on the App
0
50
0°
359°
20mA OUTPUT SPEED (m/s)
20mA OUTPUT DIRECTION
CHANNEL 1 4-20MA
4mA OUTPUT SPEED (m/s)
4mA OUTPUT DIRECTION
BACK
CHANNEL 2 4mA / 20mA
4-20MA
CHANNEL 1 4mA / 20mA
BACK
12
3

Name
Date
Time
Unit
Factory Reset
Device Information
19
GENERAL page
CALIBRATION page
Item
1
2
3
4
5
Definition
Go to data setting page.
Go to time setting page.
Go to measure value setting page.
Do factory reset
Show the information of the sensors and receiver
Item
1
2
3
Definition
Calibrate sensor 1 or sensor 2 wind speed
Do 5-points wind speed calibration (2m/s, 5m/s, 10m/s,
15m/s, 20m/s)
Date of the last time sensor 1 and sensor 2 wind speed are
calibrate
15/02/2022
(UTC+00:00) 15:38
DATE (DD/MM/YYYY)
TIME
GENERAL
UNIT
FACTORY RESET
DEVICE INFORMATION
BACK
1
2
3
4
5
WIND SPEED CALIBRATION
CALIBRATION
BACK
NO
NO
LAST CALIBRATION RECORD
CHANNEL 1: N/A
CHANNEL 2: N/A
CHANNEL 1 SENSOR
WIND SPEED CALIBRATION
CHANNEL 2 SENSOR
BACK
CALIBRATE TO 2.0 m/s?
WIND SPEED READING: 2.3 m/s
NEXT(1/5)CANCEL
1
2
Name
Wind Speed Calibration
Wind Speed Calibration
Last Calibration Record