Scene S-LH9 User manual

www.infrared-ir.com
Dimension
Unit: mm
Models for selection
Model Beam Angle IR Distance (850nm)
S-LH9-15-A-IR 15° 80m
S-LH9-30-A-IR 30° 60m
S-LH9-45-A-IR 45° 40m
S-LH9-60-A-IR 60° 25m
*IR distance is tested by SONY 1/3" CCD Camera.
To achieve the distance needed, please pay attention to your camera
specification and lens before purchase. It is normal phenomenon that distance
may vary due to different cameras and lens.
Our product is weatherproof and dustproof. Do not modify the shape, dismantle or
reconfigure the product, any inflow of water cause by which are not be responsible for
warranty repair.
Instruction of IR Illuminator
S-LH9
Please strictly follow the below instructions when install this product!

www.infrared-ir.com
Description
• Smart uniform irradiation solution improves image quality & monitoring effect
• Accurate constant circuit drive develops excellent performance of product
• Fill light for night vision camera
• Long range IR distance at night time
• Indoor/outdoor use, all-weather use
• High integrated solution for easy installation and saving cost
Specification
Quantity of LED 9pcs high power IR LED
Wavelength 850nm
Beam angle 15°- 60°
IR distance 80m-25m
Day/night switch CDS 10-20lux ±10%
Input voltage AC110-220V
Power consumption 10W
Cable length 3 core wire 70cm
Panel Tempered glass panel
Housing Aluminum die-casting housing
Bracket Wall mount bracket
Working temperature -20℃ to + 5 0℃
Protection level IP66
Color White
N.W 0.65kg
G.W 0.8kg
Packing dimension 190*160*130mm
Installation
1. The product includes fragile parts. Take care on every transportation steps and
hold carefully, do not stress!
2. Ensure operating voltage and current are proper before installation.
3. Install the product on the holder by fixing the mount hold with screws directly.
4. Adjust the angle of product by loosing screws on bracket.
5. Link power wires tightly and make it waterproof to avoid electric shock.
6. Connect with extra power wire should make it waterproof at the same.
7. The outlet of power wire should be installed downward.
8. Don't use against any fire precaution rules during operation.
9. Installation requested professional operation and qualified personnel.
10. Connect our sales person if you need additional parts for installation.
Maintenance
1. Cut off power before maintenance.
2. Clean the glass regular to get better transmission of light.
3. Clean the housing to get well heat dissipation performance.
4. Clean by dry dishcloth, don't use water or strong corrosive solution.
Night vision pictures
Night time with IR Light Night time without IR Light