Sceptre D40 Manual

— 1 —
How to mount the speakers
1. Align the speaker hooks with the cavity holes.
2. Insert the speaker hooks into the cavity holes.
3. Slide speakers downward to attach securely.
How to detach the speakers
1. Lift the speakers upwards.
2. Make sure the hooks are disengaged from the cavity holes.
3. Push the speakers toward the back of the monitor to detach.
15" & 17" MONITOR SPEAKER SPECIFICATION:
∗∗∗DONOTUSEFORCE.YOUMAYDAMAGETHESPEAKERHOOKS.

SPEAKERS:
SPEAKER TYPE...................................................................... 30mmX100mm FULL RANGE
IMPEDANCE...............................................................................................................4 OHMS
FREQENCY RESPONSE ........................................................................................180-20KHz
MAX.POWER.......................................................................................................................7W
OUTPUT S.P.L...................................................................................................................79dB
AMPLIFIER:
OUTPUT POWER ........................................................................................................5W+5W
S/N RATIO.........................................................................................................................70dB
INPUT SENSITIVTY......................................................................................................300mV
INPUT IMPEDANCE .............................................................................................47K OHMS
Volume
Tone
Power
Ear Phone