Sceptre S1200 User manual

1
1. Unpack the Scanner1. Unpack the Scanner
1. Unpack the Scanner1. Unpack the Scanner
1. Unpack the Scanner
2.2.
2.2.
2. Install the SCSI Interface CardInstall the SCSI Interface Card
Install the SCSI Interface CardInstall the SCSI Interface Card
Install the SCSI Interface Card
Insert the SCSI card by pressing it gently
but firmly into a 16 bit slot.
3.3.
3.3.
3. Unlock the ScannerUnlock the Scanner
Unlock the ScannerUnlock the Scanner
Unlock the Scanner
4.4.
4.4.
4. Connect the ScannerConnect the Scanner
Connect the ScannerConnect the Scanner
Connect the Scanner
Connect the SCSI cable to the SCSI card
and to the scanner. Connect the power
cable. Turn on the scanner and then the
computer.
S1200 EZ - INSTS1200 EZ - INST
S1200 EZ - INSTS1200 EZ - INST
S1200 EZ - INSTALLALL
ALLALL
ALLAA
AA
ATIONTION
TIONTION
TION
Software InstallationSoftware Installation
Software InstallationSoftware Installation
Software Installation
IMS Shell InstallationIMS Shell Installation
IMS Shell InstallationIMS Shell Installation
IMS Shell Installation
Insert the IMS Shell CD and follow the
on-screen Instructions to completely install
IMS Shell.
1. Insert the Installation Diskette in A:\.
2. Run A:\install and follow the on-scree
instructions.
Color Scanner
SCSI card
SCSI cable
Power cable
IMS Shell CD
Installation diskette
EZ-Installation Guide
User Guide
Scanner Driver InstallationScanner Driver Installation
Scanner Driver InstallationScanner Driver Installation
Scanner Driver Installation
Win95/98/ NTWin95/98/ NT
Win95/98/ NTWin95/98/ NT
Win95/98/ NT
AA
AA
Adaptec compatible SCSI card:daptec compatible SCSI card:
daptec compatible SCSI card:daptec compatible SCSI card:
daptec compatible SCSI card: This selection
is recommended for most users. You need to turn on
the scanner before starting the PC.
Domex SCSI cardDomex SCSI card
Domex SCSI cardDomex SCSI card
Domex SCSI card: This selection allows you to
turned on the scanner anytime. However, if you have
illegal operation issue, please reinstall the scanner driver
and select Adaptec compatible SCSI card.
Click on "OK" to proceed.
Click on "OK" to proceed.
50-pin SCSI Port
25-pin SCSI Port

2
SCSI Driver InstallationSCSI Driver Installation
SCSI Driver InstallationSCSI Driver Installation
SCSI Driver Installation
Windows 95/98Windows 95/98
Windows 95/98Windows 95/98
Windows 95/98
SCSI Driver InstallationSCSI Driver Installation
SCSI Driver InstallationSCSI Driver Installation
SCSI Driver Installation
Windows NTWindows NT
Windows NTWindows NT
Windows NT
1. Login as Adminstrator.
2. Insert Vividscan Installation Disk in A:\.
3. Click on "Start" -> "Setting" -> "Control Panel" ->
"SCSI Adapters".
4. Click on "Drivers" -> "Add" ->
"Have Disk" -> "A:\winnt40".
5. Click on "OK" -> "OK" -> "Yes" to restart the
NT system.
4. Click on "Have Disk" -> A:\ -> OK.
5. Click "Next" -> "Next" -> "Finish".
3. Select "SCSI controllers" then click on
"Next" to continue.
1. Clcik on "Start" -> "Settings" -> "Control
Panel"..
..
.
2. Click on "Add New Hardware" -> "Next" ->
No, I want to select the hardware from a list
-> "Next".
Note:Note:
Note:Note:
Note: Make sure you turn on the scanner
before you turn on the PC. You might
need to restart your PC a couple times.

3
S1200 QUICK STS1200 QUICK ST
S1200 QUICK STS1200 QUICK ST
S1200 QUICK STARTART
ARTART
ART
Start Scanning:Start Scanning:
Start Scanning:Start Scanning:
Start Scanning:
1. Turn on your scanner.
2. Turn on your PC.
3. Place the original face down on the scanner.
Center the original along the zero mark.
4. Close the Upper Cover.
5. Launch IMS Shell Application.
6. Select Source.
7. Acquire the Vividscan TWAIN control panel.
8. Click on the PreviewPreview
PreviewPreview
Preview button.A low-resolution
image will appear in the Preview Window.
9. Click on SelectSelect
SelectSelect
Select and move the cursor to the Pre-
view Window. Make a selection by holding down
the left mouse key and drag.
10. Click on the ScanScan
ScanScan
Scan button .
11. Click on the CloseClose
CloseClose
Close button.
"Start" button:"Start" button:
"Start" button:"Start" button:
"Start" button:
Click on SelectSelect
SelectSelect
Select to confirm.
Zero Mark PreviewScan Close
Preview Window
Select
"Start" button
This icon on the Taskbar indicates the
scanner is working properly.
This is the One-Touch-Button that allows you to
open the IMS Shell application and Vividscan
simultaneously.

4
!!
!!
!How do I know the SCSI card and scannerHow do I know the SCSI card and scanner
How do I know the SCSI card and scannerHow do I know the SCSI card and scanner
How do I know the SCSI card and scanner
are work properly?are work properly?
are work properly?are work properly?
are work properly?
1.Click on the "Start" -> "Setting" -> "Control
Panel" -> "System" -> "Device Manager" ->
SCSI Controllers.
!!
!!
!What is the function of the "Start" buttonWhat is the function of the "Start" button
What is the function of the "Start" buttonWhat is the function of the "Start" button
What is the function of the "Start" button
at front of scanner?at front of scanner?
at front of scanner?at front of scanner?
at front of scanner?
1. This is the One-Touch-Button that allows you
to open the IMS Shell application and
Vividscan dialog simultaneously.
2. You can press the "Start" button to execute
scanning after selecting the scan area.
!!
!!
!How do I use OCR?How do I use OCR?
How do I use OCR?How do I use OCR?
How do I use OCR?
1. Change the "Image Type""Image Type"
"Image Type""Image Type"
"Image Type" to "LineArt""LineArt"
"LineArt""LineArt"
"LineArt"
2. Prescan the document
3. Select scanning area
4. Scan the document
5. Close the Twain Driver
6. Drag the file to the word processor icon in the
IMS Shell Application Bar.
""
""
"Tech SupportTech Support
Tech SupportTech Support
Tech Support
626.369.3698
www.sceptre.com
[email protected]
""
""
"IMS Shell SupportIMS Shell Support
IMS Shell SupportIMS Shell Support
IMS Shell Support
www.gic.com.tw.
FAQFAQ
FAQFAQ
FAQ
!!
!!
!If you get black images:If you get black images:
If you get black images:If you get black images:
If you get black images:
Please unlock your scanner.
!!
!!
!If you get a "Scanner Not Found" message:If you get a "Scanner Not Found" message:
If you get a "Scanner Not Found" message:If you get a "Scanner Not Found" message:
If you get a "Scanner Not Found" message:
1. Check the Sequence: First turn on the scan-
ner, then turn on your PC.
2. Check the SCSI Card: Make sure the SCSI
card is installed correctly in Device Manager.
3. Check the SCSI Cable: Reconnect the cable
to the scanner and to the SCSI card.
4. Check the SCSI ID: Make sure all the SCSI
devices have different ID number.
!!
!!
!If you get a "Not Enough Memory" message:If you get a "Not Enough Memory" message:
If you get a "Not Enough Memory" message:If you get a "Not Enough Memory" message:
If you get a "Not Enough Memory" message:
1. Make sure you have enough free space on
your hard drive.
2. Click on the "Reset""Reset"
"Reset""Reset"
"Reset" button in Vividscan Twain
driver..
3. Lower the resolution or select a smaller scan-
ning area.
!!
!!
!How do I use IMS Shell?How do I use IMS Shell?
How do I use IMS Shell?How do I use IMS Shell?
How do I use IMS Shell?
Please refer to Appendix page A-5 to A-12 of
the User Guide. For more information please
use IMS Shell's online help or visit
www.giv.com.tw.
!!
!!
!How do I get 30-bit images?How do I get 30-bit images?
How do I get 30-bit images?How do I get 30-bit images?
How do I get 30-bit images?
The 30-bit scanner captures over a billion colors
to give you the most accurate details in high-
lights and shadows. The image is then optimized
to a 24-bit image file for the Windows 95 oper-
ating system.
!!
!!
!If the images look blurry or have white lines:If the images look blurry or have white lines:
If the images look blurry or have white lines:If the images look blurry or have white lines:
If the images look blurry or have white lines:
1. Set Display Properties to High Color (16-bit).
2. Allow 3 minutes for scanner to warm up.