Sceptre S300P User manual

1
Scanner installationScanner installation
Scanner installationScanner installation
Scanner installation
Unlock the scanner
Connect the S300P to the PC & Printer
Install all the related software applications
1. IMS Shell
2. Vividscan II TWAIN driver
1.1.
1.1.
1. Unlocking the S300P scannerUnlocking the S300P scanner
Unlocking the S300P scannerUnlocking the S300P scanner
Unlocking the S300P scanner
2.2.
2.2.
2. Connecting the S300P to a PC andConnecting the S300P to a PC and
Connecting the S300P to a PC andConnecting the S300P to a PC and
Connecting the S300P to a PC and
PrinterPrinter
PrinterPrinter
Printer
a. Power off the computer and any devices
that are connected to it (e.g., monitor,
printer or modem)
b. Disconnect the printer cable from the printer
port in the back of your PC.
c. Take the disconnected end of the printer
cable and attach it to the port in the back
of the S300P scanner. Tighten the retain-
ing screws.
d. Connect one end of EPP cable to the
printer port in the back of your PC and
tighten the retaining screws.
e. Connect the other end of the EPP cable to
the port in the back of the scanner of
computer port.
f. Connect the power adapter to the S300P
scanner and plug it into an appropriate
power outlet.
g. Power on the computer and wait for the
computer to finish booting up.
h. Install the scanner driver (Vividscan II
TWAIN driver) and application software
(IMS Shell) by referring to the next sec-
tion.
S300P EZ - INSTS300P EZ - INST
S300P EZ - INSTS300P EZ - INST
S300P EZ - INSTALLALL
ALLALL
ALLAA
AA
ATIONTION
TIONTION
TION
3.3.
3.3.
3. Install software applications - IMS ShellInstall software applications - IMS Shell
Install software applications - IMS ShellInstall software applications - IMS Shell
Install software applications - IMS Shell
& scanner TWAIN driver& scanner TWAIN driver
& scanner TWAIN driver& scanner TWAIN driver
& scanner TWAIN driver
a. Start Windows 95.
b. Place the CD into your CD-ROM drive.
c. Click on "Start" and select "Run" from the
pop-up menu.
d. Type "Drive:\install.exe" (Where drive is
your CD-ROM drive) in the "Open" box.
e. Click on "OK" to confirm and follow the
instructions on the screen to install the
IMS Shell & scanner TWAIN driver.
!
!

2
S300P SCANNER QUICK STS300P SCANNER QUICK ST
S300P SCANNER QUICK STS300P SCANNER QUICK ST
S300P SCANNER QUICK STARTART
ARTART
ART
A.A.
A.A.
A. Placing the original on the windowPlacing the original on the window
Placing the original on the windowPlacing the original on the window
Placing the original on the window
glassglass
glassglass
glass
1. Raise the upper cover of the S300P scan-
ner.
2. Place the original facedown on the window
glass.
Please place the original against the top and
right rulers as illustrated below:
3. Slowly close the upper cover of your S300P
scanner, making sure the document remains
in position.
B.B.
B.B.
B. Starting the S300P scannerStarting the S300P scanner
Starting the S300P scannerStarting the S300P scanner
Starting the S300P scanner
1. Make sure your scanner is still on.
2. Turn on your PC and launch Windows.
3. Launch the IMS Shell application software
that came with the scanner.
4. Choose the Select SourceSelect Source
Select SourceSelect Source
Select Source option from the
FileFile
FileFile
File menu to display the Select SourceSelect Source
Select SourceSelect Source
Select Source
dialog box.
5. Choose "Vividscan II 32""Vividscan II 32"
"Vividscan II 32""Vividscan II 32"
"Vividscan II 32" as your image
source and click on "Select""Select"
"Select""Select"
"Select" toconfirm. You
will return to the main screen of the IMS
Shell application.
.
6. Click on "Acquire""Acquire"
"Acquire""Acquire"
"Acquire" from the FileFile
FileFile
File menu or
the icon under IMS Shell's tool bar to
open the control panel. Once the control
panel is opened, you are ready to proceed
with scanning.
7. Click on the "PRESCANPRESCAN
PRESCANPRESCAN
PRESCAN"button. A quick low-
resolution image will appear in the preview
window.
8. Use the crop frame in the preview window to
outline the image area you wish to scan.
9. Click on "SCANSCAN
SCANSCAN
SCAN" button.
10.Click on the " " icon to close the
Vividscan II TWAIN dialog box.
Note: If you want to use the default settings, you
can click on the button to open the
profile named Default2.prf.
Place your original against
top ruler and the arrow
indicator to make sure the
image of your picture will
be totally scanned.
HF393S6P104