Schenker S306 User manual

Preface
Security alert
To prevent the fire, electric shock, personal injury or other dangers, in the use of
the computer, you should follow the basic safety precautions, including:
before using the computer, read the instructions carefully.
before setting, put the computer on the stable countertop.
keep the computer away from the heat, moisture, and dust.
do not hit, drop the computer to avoid the damage.
do not spill any liquid onto the computer to damage it or cause a fire.
do not insert any object into the computer's air vents or other slots.
make sure the power code is not easy to be tripped on the location of the people
or be stopped on.
if you do not intend to use the computer for a long time, please disconnect the
plug.
do not disassemble the computer, in order to be safe, let the qualified professional
for the service.

12
Contents User's Guide
Chapter 1: Use of the Computer
NO.1.1 Packing List
NO.1.2 Connect power
Note : The appearance, color, features, and pictures in the manual are for
reference only; if different, please see the actual products.
Our company reserves the right to update the products and the manual without
prior notice.
Dear customer
Thank you for choosing this product!
Your computer has powerful information processing capabilities and mobile characteristic,
as well. Whether you are in the office or at home or travel, it is your effective assistant,
andaccompanies you all the time.
The following text will help you master the methods and the techniques for use of the
product.
When you receive the Notebook, please open the package outside box and carefully
remove the content; if there is any omission or damage, please contact the computer
supplier immediately.
Chapter 1:Use of the Computer
Chapter 2:Activation of the Computer
Chapter 3:Install Operating System and Driver
Chapter 4:Extension of the computer functions
Chapter 5:Control Center Functions
Packing List
Connect power
Top View with LCD Panel Open
Running the notebook
Use the shortcuts
Install the Operating System
Other settings of SCU
Install the Driver program
Expand the interface devices
Use the Control Center
2
2
2
2
3
3
4
5
5
5
7
8
8
9
9
Chapter 2: Activation of the Computer
Reference Version

34
NO.2.1 Top View with LCD Panel Open
NO.2.2 Running the notebook
NO.2.3 Use the shortcuts
Open up directly to the LCD (as show), to adjust the angle of the cover to get the
most appropriate visual effect. Be careful when open and shut down the computer
cover, please gently; forced open or shut down with the way of rejection may
cause the computer damage.
Make sure the computer has connected the adapter or the battery before press
the power button for one second to run the computer.
1
2
Key Key Description Description
Fn+Esc
Fn+F1
Fn+F3
Fn+F4
Fn+F5
Fn+F6
Fn+F7
Fn+F8
Fn+F9
Fn+F11
Fn+F12
Fn+
Fn+
Enter Suspend state
Enable or disable the touchpad
Enable or disable the wireless module
Enable or disable sound
Decrease the brightness of LCD
Increase the brightness of LCD
Switch LCD/HDMI
Open or Close the Display
Customized; The default is to quickly open Internet
Customized; The default is to quickly open Media player
The default is to quickly open Bluetooth (option)
Increase the volume
Decrease the volume
Power button
Power indicator
Turn on/off computer
When the amber LED is on ,it means that the battery is
When the white LED is on,it means that the battery has
The battery and
charging status
indicator
3
The white LED light means wireless module has been
turn on.
The white LED black out means wireless module has
been turn off.
WIFI signal
indicator
4
+
-
When the power LED is on, it is started ;
When the power LED is off ,it is hibernate or shutdown now;
When the power LED is breathing ,it is sleep now;
been fully charged;
charging;
1
2
3
4

56
3.1 Install the Operating System
3.2 Other settings of SCU
Chapter 3: Install Operating System and Driver
Before installing OS, you need set OS CD to the boot device according to the
following instructions.
Turn on the computer, press [F2] key to enter the BIOS Setup screen.
Main menu: Set system time and date, check the related information such
as: BIOS, EC, MB version, etc.
When enter the BIOS Setup screen, use the [ ] key or [ ]key on the keyboard to choose
Boot, select one device in the Boot option #1, and press the [ + ]or [ - ] button to set
priorities.
Advanced menu: Conduct the following superior settings.
The security setting to enter the system.
SATA mode selection :
Administrator password :
User password :
HDD security configuration :
Secure Boot menu :
Choose IDE,AHCI,RAID mode
Set administrator password for setup utility
Set user password for setup utility and power on password
Set HDD/SSD password
Customizable secure boot setting
Security menu :

7 8
Save & Exit menu: Exit the BIOS Setup after completed the relevant setup.
Please use the CD attached with the machine to operate in accordance with the CD
operation interface.
Option 1: Computer-specific driver.
Option 2: Application Software.
Choose the driver program you need and operate according to the screen instruction.
System will install the driver program automatically; during the process, the system
may restart.
3.3 Install the Driver program
Save changes and exit :
Discard changes and exit :
Save changes and reset :
Discard changes and reset :
Save changes :
Discard changes :
Restore Defaults :
Save as user Defaults :
Restore user defaults :
Boot override :
Launch EFI shell from filesystem device :
Exit system setup after saving the changes
Exit system setup without saving any changes
Reset system after saving the changes
Reset system setup without saving any changes
Save changes done
Discard changes done
Load default values for all the setup options
Save the changes done so for as user defaults
Restore the user defaults to all the setup options
Have a direct boot from a certain boot object
Attempts to launch EFI Shell
from one of the available filesystem devices application
1
2
5
6
7
Item Item Description Description
Attention : Your Computer may not have all the interface above according to the
specific type, please check with the real.
Chapter 4: Extension of the computer functions
NO.4 Expand the interface devices
DC-in Jack
USB 2.0 port
Microphone-in and
Headphone-out Jack
Card Reader
HDMI port
AC Adapter
Connect USB 2.0 devices, such as: Printer etc.
3.5mm standard Microphone-in and Headphone-out combo
Jack or standard headset Jack
Forced off with needle insert the reset hole, you can't turn off
the tablet PC by press power button 4S, when the system stuck
Insert SD/MMC to expand the computer functions
External high-definition Multimedia monitor interface
3
4Restet
6
78
5
USB type-c port Connect USB type-c to USB 3.0 devices
8USB 3.0 port Connect USB 2.0/3.0 devices, such as: Printer etc.
4
2
13

9 10
Chapter 5: Control Center Functions
Note : If you want to make use of the Control Center, please install the computer
attached data driver program.
Control center can make the modification after the printing; if there is any different ,
please see the actual product, and this picture just for reference.
5.1 System Information
NO.5.0 Use the Control Center
You can search all kinds of information through control center, conduct system
settings and view the help information.
Click the system information mark on the home-page of Control Center so that
you can see the system basic information, as the following picture:
Click the battery mark on the home-page of the Control Center to view the system
power supply information and auto-warning settings.
As shown in the following picture:
Click the cooling control mark on the home-page of the Control Center to view the
relevant CPU temperature and fan status.
As shown in the following picture:
5.2 Battery
5.3 Thermal Condition
Note : Click the drop-down menu on the lower right corner to search more information.

11 12
The method to adjust the display device is that when it connects the external monitors such as
HDMI, click HDMI display mark first, click the switch to the selected display device button which
will transmit the image to the corresponding display.
Note : It maximum allows two display devices to display simultaneously.
Click the display mark on the home-page of the Control Center to carry out the
display settings and adjust the brightness of the LCD blacklight.
as shown in the following picture:
5.4 Display
Click the shortcuts mark on the home-page of the control center to select the
programs you want to startup. If you want to return to the factory device, click the
restore default button.
5.5 Hot key
Click the profile icon on the home-page of the Control Center so that you can set
the different power cases by yourself according to the need.
5.6 Environment
as the picture below:
You can turn ON / OFF the device by clicking the Disable/Enable . The icon will
show "X" when the device was turn off.
Note : Based on the different models, the picture you see may be different with the chapter;
please see the actual product.
5.7 Device Controller