Schertler GIULIA X User manual

QUICK GUIDE V1
GIULIA X
THANK YOU
FOR
CHOOSING
SCHERTLER

CONNECTIONS
Microphones input
(condenser or dynamic)
or DYN contact
microphones BALANCED output
to mixer
Instruments input
FROM externa effectsTO externa effects
UNBALANCED
output to monitor
GIULIA X
GAIN B
MIC IN A
GAIN A
P24 A10V BINSTRUMENT IN BLOW MID HIGH WARM REV MASTER INSERT
LINE OUT
DI OUT –15dB
CLASS–A HIGH VOLTAGEPREAMP / No Integrated Circuits / No Nfb SWISS
MADE

QUICK START
TURN ON THE AMP
Set the MASTER volume and both GAIN potentiometer completely closed.
Connect the power cable to mains and switch on the amp.
If a round noise (hum at 50-60Hz) is present, ip the round lift switch (GND LIFT) on the rear panel.
CONNECTIONS
You can use simultaneously the MIC channel (XLR) and the INSTRUMENT channel (¼”jack). Remember to
activate the P24 phantom power on the MIC with condenser microphones and DYN P48 contact microphones
or the 10V on the INSTRUMENT with STAT or other electrostatic microphones.
LEVELS SET UP
Open the MASTER between 30% and 50% then start to raise the GAIN potentiometer. If the sound starts to et
distorted, turn the GAIN back a little. Now adjust a ain the MASTER as needed.
OTHER FEATURES
Once the levels are properly set, you can shape your sound with the EQ and the WARM lter and set the amount
of REVERB you want on your MASTER output.
EXTERNAL EFFECTS
You can connect external effect usin a Y cable: connect the stereo jack to the INSERT socket and the two mono
jacks to the input and output of the external pedal.
USER MANUAL available online at www.sche tle .com
RELATED PRODUCTS
TEDDY
Sta e monitor
BAG
Various colors
available
CA JM JM
¼”jack cable CA XF XM XLR cable
DYN P48
contact
microphones
STAT
pickups
VOLUME
PEDAL

Schertler SA
Via Beroldingen 18
6850 Mendrisio
Switzerland
T [phone]
F [phone]
[e-mail]
www.schertler.swiss
Facebook @schertler.sa
Instagram @schertleraudio
Youtube @Schertler SA
#shareyourschertler
Scan the QR code to open
the USER MANUAL
QUICK GUIDE