schildknecht DATAEAGLE 3713 Guide

Installation and commissioning manual
Wireless Data System
DATAEAGLE® 3XXX Classic
Schildknecht AG
D -71711 Murr –Haugweg 26
Phone [phone] - Fax [phone]
Email: [e-mail] - Internet: www.schildknecht.ag
DATAEAGLE 3XXX-A Classic
Version: 06.07.2016

Installation and commissioning DATAEAGLE 3XXX Classic
© Copyright
Schildknecht AG
All rights reserved.
No part of this
publication may be
reproduced or translated
in full or in part without
prior written permission.
Right to make changes
Changes may be made
at any time to the form,
equipment and
technology of items
covered in this
documentation. For this
reason, no claims
relating to the
aforementioned may be
derived from the
information,
illustration and
descriptions provided in
these operating
instructions for
appliances or systems
manufactured after the
date of issue of these
operating instructions.
Warranty
Schildknecht AG can
accept no liability for
indirect damage or direct
damage, incidental
damage, consequential
damage or
compensation for
expenses incurred by
performance of contract
which arise from
delivery, provision and
use of this material.
Introduction
The technical description of the wireless data systems from
Schildknecht AG consists of an operating instruction for all
product families and an installation and commissioning
manual for each product family. Please read both documents
carefully before you start working with the wires data
systems. Both documents should be considered as a single
entity.
The operating instruction is intended to help you familiarize
yourself with the structure and function of wireless data
systems.
You are
here

Installation and commissioning DATAEAGLE 3XXX Classic
Here you get general information about the complete
product family. Please read the operating instructions first if
you are not familiar with the structure and function of wireless
data systems.
Next, read the installation and commissioning manual of the
wireless data system.
To start with, we have a few important things to say about
safety. Please observe these instructions without fail, in order
to avoid property damage and personal injury.
We show you step by step how to install the system, put it
into operation and how to operate it.
Any questions? First, have a look in the table of contents.
You will quickly find what you are looking for.
If you do need us in person: just call us or send a fax:
Schildknecht AG
Haugweg 26
D -71711 Murr
Phone
+49 / (0) 7144 89718-0
Fax
+49 / (0) 7144 8971829
Internet
www.schildknecht.ag
e-mail
[email protected]
WWW
e-mail
FAX

Installation and commissioning DATAEAGLE 3XXX Classic
List of contents
Subject Page no.
Introduction 1-1
1. General information 1-1
1.1. Guide to symbols 1-1
1.2. Copyright and brand names 1-1
1.3. Declaration of conformity and EC directives 1-1
2. Safety instructions 2-1
2.1. Intended use 2-1
2.2. General information 2-1
2.3. Installations instructions 2-2
2.4. Safety instructions for operation 2-2
2.5. Personnel qualification 2-3
3. Structure 3-1
3.1. System description 3-1
3.2. Radio module 3-2
4. Installation of new devices 4-4
4.1. Overview Installation 4-4
4.2. Install unit on top-hat rail 4-5
4.3. Install antenna cable 4-6
4.4. Connect Profibus plug 4-7
4.5. Connect power supply 4-7
5. Extension and exchange 5-9
5.1. Preparation 5-9
5.1.1. System requirements 5-9
5.1.2. Create a new folder 5-9
5.1.3. Microsoft Internet Explorer 5-10
5.1.4. Install USB drivers 5-11
5.1.5. Install Dataeagle Wizard 5-15
5.2. Extension 5-17
5.2.1. Additional Profibus Slave to existing or new Radio Slave 5-17
5.2.2. Additional Radio Slave 5-17
5.2.3. Start Dataeagle Wizard 5-18
5.2.4. Configure Radio Master 5-19
5.2.5. Configure Radio Slave 5-24
5.3. Exchange 5-27
5.3.1. Remove wiring 5-28
5.3.2. Remove old module 5-28

Installation and commissioning DATAEAGLE 3XXX Classic
5.3.3. Install new module 5-28
5.3.4. Start Dataeagle Wizard 5-29
5.3.5. Procedure for exchanging radio modules 5-30
5.3.6. Example 1: Exchange of a Radio Slave 5-31
5.3.7. Example 2: Exchange of a Radio Master 5-38
5.4. Profibus-Slave-Addresses 5-52
5.4.1. Procedure for exchanging a Radio Master before de-installation 5-53
5.4.2. Profibus-Slave-Address at system extension 5-58
5.4.3. Profibus-Slave-Address when Radio Master is exchanged 5-60
6. Increasing the system availability 6-1
6.1. Function 6-1
6.2. Setting of the filter time 6-1
6.3. Typical values for the filter time 6-5
6.3.1. Default 6-5
6.3.2. Recommendation for operation 6-5
6.3.3. Recommendation for commissioning 6-5
6.3.4. Recommendation for applications with Profisafe 6-5
7. Working with the diagnostic slave 7-1
7.1. General information 7-1
7.2. Mode of operation 7-2
7.3. Integrate the diagnostic slave into a Profibus network 7-3
7.3.1. Integrate GSD file of diagnostic slave in Step 7 7-3
7.3.2. Data exchange between PLC program and diagnostic slave 7-10
7.3.3. Data structure 7-11
7.4. Examples of applications 7-18
8. Dismantling and disposal 8-1
9. Tips and Tricks 9-1
9.1. Improving the EMC safety 9-1
9.1.1. Introduction 9-1
9.1.2. Basic guidelines 9-1
9.2. Guidelines for optimized installation of antennas 9-5
9.3. Advices for troubleshooting 9-7
10. Technical specifications 10-2

Installation and commissioning DATAEAGLE 3XXX Classic


Chapter 1 –General information
1. General information
1.1. Guide to symbols
This section contains an explanation of the symbols used in
this manual.
Indicates an imminently hazardous situation which, if not
avoided, may result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in property damage.
Indicates sections which contain important information.
Indicates work operations which need to be carried out.
This symbol is followed by a description about how the status
of the system changes after an operation has been carried
out.
1.2. Copyright and brand names
Brand names and product names mentioned in this manual
are trademarks or registered trademarks of their respective
owners.
Microsoft Windows 7, Windows Vista, Windows 2000,
Windows XP and Microsoft Internet Explorer are registered
trademarks of Microsoft Corp.
Adobe Reader is a registered trademark of Adobe Systems
Corp.
DATAEAGLE® is a registered trademark of Schildknecht AG.
1.3. Declaration of conformity and EC
directives
Information about the declaration of conformity and about EC
directives can be found under:
http://www.schildknecht.ag/download/dataeagle-konformitaetserklaerung
CAUTION

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 2 - Safety instructions
2. Safety instructions
2.1. Intended use
Information about the intended use can be found in the
operating instructions wireless data systems DATAEAGLE.
2.2. General information
In order to guarantee safe use and fault-free operation, the
according safety instructions have to be observed under all
circumstances.
Safety instructions which apply to all product families are
described in the operating instructions for wireless data
systems DATAEAGLE. This manual is part of the system
documentation. Read these instructions before installation
and commissioning of the wireless data system.
Safety instructions which apply only to an individual wireless
data system are described below and in the according
section of this installation and commissioning manual.

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 2 - Safety instructions
2.3. Installations instructions
Country licenses can be found in the attached
declaration of conformity.
Risk of electrical shock.
Always disconnect the modules from the power source
when working on the modules (installation, etc.)!
Risk of injury.
Comply with the local regulations and safety
instructions during installation!
Static charges can damage electronic devices.
Remove electrostatic discharge from your body before
touching the device!
The modules must not be opened or modified (except
the steps described in this manual). Do not repair the
module yourself, replace it with an equivalent module.
Repairs may only be carried out by the Schildknecht AG.
The Schildknecht AG is not liable for damage resulting
from a failure to comply.
2.4. Safety instructions for operation
Electromagnetic radiation.
Keep at least a distance of 20 cm to the antennas when
the devices are in operation.
CAUTION
CAUTION

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 2 - Safety instructions
2.5. Personnel qualification
Only qualified personnel may carry out the following tasks:
Installation
Commissioning
Operation
Maintenance
Within the context of safety regulations, qualified personnel
are individuals authorized to commission, to ground, and to
identify equipment and systems in accordance with the
safety-engineering standards.
All operating personnel must be trained accordingly.
Personnel involved with operating the unit in conjunction with
controllers must possess sound programming skills for the
individual controller and programming language in question.

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 3 –Structure
3. Structure
3.1. System description
The system is used for the wireless Profibus transmission.
It consists of a radio master and up to 4 radio slaves
(depending on the device type).
The DATAEAGLE can have up to 8 Profibus slaves
(depending on the device type)
The radio links work like a Profibus cable. Each radio module
is identified by its address.

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 3 –Structure
3.2. Radio module
The radio module transmits the signals via radio and is
available in two radio technologies.
.
Radio modules are configured with the software Dataeagle
Wizard (see chapter 5.3.8)
New devices are pre-configured in the factory.
Further settings are not necessary.
Type
Radio technology
Transmission
power
Profibus
Profibus
Slaves
Radio
Slaves
3712
2,4 GHz Bluetooth
100 mW
bis 1,5 MBit
max. 8
max. 4
3713
2,4 GHz Bluetooth
100 mW
bis 1,5 MBit
max. 4
max. 3
3715
2,4 GHz Bluetooth
100 mW
bis 1,5 MBit
max. 4
max. 1
3323
869 MHz
500 mW
bis 1,5 MBit
max. 4
max. 3

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 3 –Structure
The illustration shows all connections of the radio module.
Antennen-
anschluss
Profibus-
anschluss
Spannungsversorgung:
1: +24 VDC
2: 0 V
3 : PE Schaltschrankerde
4: Relais 13
5: Relais 14
6: 24V Schalteingang
USB-
anschluss
Status-LEDs
n.c.
Busfehler BF
Status-LEDs
n.c.
LINK
Bedeutung der Status-LEDs :
Name
Farbe
Funktion
BF
Rot
Profibusstatus Dataeagle Master
(beim Slave immer aus)
Statisch an: keine Verbindung zum Profibus-Master bzw.
Baudrate zu hoch.
Blinkend: Fehler (irgendeiner der angeschlossenen DP-
Teilnehmer ist nicht im Datenaustausch.
Aus: alle angeschlossenen DP-Teilnehmer befinden sich
im Datenaustausch
LINK
Blau
DE37XX:
Bluetoothverbindung aufgebaut
DE332X:
Bei Verbindung Flackern im Sekundentakt
1
6

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 4 –Installation of new devices
4. Installation of new devices
Please be certain to read the guidelines in chapter 7
„Tips and Tricks – improvement of the electromagnetic
compatibility (EMC)“. Observe these guidelines during
the complete installation procedure. Thereby you avoid
electromagnetic interferences and you improve the data
transmission quality.
New devices are pre-configured in the factory.
Further settings are not necessary.
4.1. Overview Installation
The installation is very easy and is carried out according to
the procedure shown below:
Install unit on top-hat rail

Connect antenna cable

Connect Profibus plug

Connect power supply
In case of limited space in the control cabinet:
Connect the power supply before you install the unit on
the top-hat rail.

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 4 –Installation of new devices
4.2. Install unit on top-hat rail
Place the unit diagonally from above on the top-hat rail.
Press the unit strongly downwards.

Installation and commissioning DATAEAGLE 3XXX Classic
CAUTION
Chapter 4 –Installation of new devices
4.3. Install antenna cable
Connect the antenna cable to the antenna connection
of the radio module.
The radio module may be damaged if the antenna cable
is fastened too tight.
Connect the antenna cable only hand-tight.
Install the antenna at the designated place.
Observe the guidelines for an optimum antenna
installation in chapter 7 „Tips and Tricks“.

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 4 –Installation of new devices
4.4. Connect Profibus plug
Connect the Profibus plug.
4.5. Connect power supply
Connect the power supply according to the diagram
shown below. Either the 24 V supply of the control
cabinet or of the Profibus Master/Slave can be used.

Installation and commissioning DATAEAGLE 3XXX Classic
CAUTION
Chapter 4 –Installation of new devices
Connect the PE cable to the radio module.
PE has to be connected with control cabinet round! If the
PE is not connected the noise filter cannot filter
interferences on 24 V DC power supply line. These may
cause malfunctions, errors or the destruction of the
device.
The nominal operating voltage of 24 V DC falls into the
category SELV (safety extra low voltage) and is thereby
no subject to the EC low voltage directive. Usage of
other power supplies is not allowed. For connection to
the 230 V AC mains supply an external wall power
supply with 12 -24 V DC/1 A output voltage can be used.
A self-healing 0,7A fuse is integrated into the input
circuit. This fuse cannot be exchanged. The device has
to be disconnected from the power supply for approx. 2
minutes after the fuse has been triggered. Ensure that
the power supply provides 9 to 33 V DC before you
switch on the supply voltage.

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 5 –Extension and exchange
5. Extension and exchange
If the system is extended or if modules are exchanged the
modules must be newly configured after installation.
Therefore the USB drivers and the software Dataeagle
Wizard must be installed on your PC and the radio module
has to be connected to the PC.
Do not yet connect the USB cable to the PC!
5.1. Preparation
5.1.1. System requirements
You need a PC with:
Operating system Windows 7, Vista, XP oder 2000.
Microsoft Internet Explorer.
Acrobat Reader.
Decompression program (WinRAR, WinZIP or similar).
One free USB interface.
5.1.2. Create a new folder
Create a new folder (e.g. Dataeagle).
Store the data which you will download in the next steps
into this folder.

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 5 –Extension and exchange
5.1.3. Microsoft Internet Explorer
To ensure a safe function it is important that you define
Microsoft Windows Explorer as standard browser before you
insert the CD ROM into the drive.
Only when Microsoft Internet Explorer is not the
standard browser:
Call the internet options via control panel.
Define the Internet Explorer as standard browser.

Installation and commissioning DATAEAGLE 3XXX Classic
Chapter 5 –Extension and exchange
5.1.4. Install USB drivers
For data transmission between PC and radio module it is
necessary to install the USB drivers.
Insert the CD in your CD-ROM drive.
The browser shows the available documents and
downloads for all Schildknecht products.
Scroll until you find your product, e.g. DATAEAGLE
3712.
Click on