
SRB 201ZH X3
Operating instructions
Safety-monitoring module
EN 1
EN Operating instructions...................... pages 1 to 6
Translation of the original operating instructions
FR
Vous trouverez la version
actuelle du mode d’emploi dans
sur l’Internet, www.schmersal.net.
ES
Encontrará el manual de
instrucciones actual en su
nuestra página de Internet
www.schmersal.net.
NL
de gebruikshandleiding in uw
Internet, www.schmersal.net.
IT
Il manuale d‘istruzioni aggiornato
-
dirizzo, www.schmersal.net.
JP
EU公用語で書かれた最新の
取扱説明書は、インターネッ
(www.schmersal.net)からダウ
ンロードできます。
1 About this document
1.1 Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety-monitoring module. The
operating instructions must be available in a legible condition and a
complete version in the vicinity of the device.
1.2
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only.
Please make sure that you have read and understood these operating
instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation.
The machine builder must carefully select the harmonised standards
selection, mounting and integration of the components.
1.3 Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information.
Caution: Failure to comply with this warning notice could
lead to failures or malfunctions.
Warning: Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine.
1.4 Appropriate use
The products described in these operating instructions are developed to
execute safety-related functions as part of an entire plant or machine. It
is the responsibility of the manufacturer of a machine or plant to ensure
the proper functionality of the entire machinery or plant.
The safety-monitoring module must be exclusively used in accordance
with the versions listed below or for the applications authorised by the
manufacturer. Detailed information regarding the range of applications
can be found in the chapter "Product description".
1.5 General safety instructions
The user must observe the safety instructions in this operating
as all prevailing safety regulations and accident prevention rules.
Further technical information can be found in the Elan
catalogues or in the online catalogue on the Internet:
www.schmersal.net.
The information contained in this operating instructions manual is
The entire concept of the control system, in which the
safety component is integrated, must be validated to
EN ISO 13849-2.
There are no residual risks, provided that the safety instructions as well
as the instructions regarding mounting, commissioning, operation and
maintenance are observed.
1.6 Warning about misuse
In case of inadequate or improper use or manipulations of
the safety-monitoring module, personal hazards or damage
to machinery or plant components cannot be excluded. The
relevant requirements of the standard DIN EN 574 must be
observed.
26.07.2010 / Index: 421/10 / Teile-Nr. 1182972-EN
Content
1 About this document
1.1 Function..............................................1
1.2 ..................1
1.3 Explanation of the symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.4 Appropriateuse........................................1
1.5 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.6 Warningaboutmisuse...................................1
1.7 Exclusionofliability.....................................2
2 Product description
2.1 Orderingcode .........................................2
2.2 Specialversions........................................2
2.3 Destinationanduse.....................................2
2.4 Technicaldata.........................................2
2.5 .....................................3
3 Mounting
3.1 General mounting instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3.2 Dimensions ...........................................3
4 Electrical connection
4.1 General information for electrical connection. . . . . . . . . . . . . . . . . .3
5 Operating principle and settings
5.1 LEDfunctions..........................................3
5.2 Description of the terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
5.3 Notes................................................3
6 Set-up and maintenance
6.1 Functionaltesting.......................................3
6.2 Maintenance ..........................................3
7 Disassembly and disposal
7.1 Disassembly...........................................4
7.2 Disposal..............................................4
8 Appendix
8.1 Wiringexamples .......................................4
8.2 ....................................4
8.3 ...................................4
8.4 Flowdiagram..........................................5
8.5 EC Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6