Scholl CP 330 User manual

GBA C 6001 12 E
BA Page 1 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
Instructions for Use
Hot or cold combiplate
Built-in unit Built-in unit for Table top
central cooling system
Model-No. Art. No. Model-No. Art. No. Model-No. Art. No.
CP 330 C 6001 CPZ 330 C 6003 CPA 330 W C 6106
CP 330 RAL C 6002 CPZ 330 RAL C 6004 CPA 330 SI C 6107
CP 660 C 6005 CPZ 660 C 6007 CPA 330 S C 6108
CP 660 RAL C 6006 CPZ 660 RAL C 6008 CPA 660 W C 6109
CP 990 C 6009 CPZ 990 C 6011 CPA 660 S C 6110
CP 990 RAL C 6010 CPZ 990 RAL C 6012
Scholl Apparatebau GmbH & Co. KG
Zinhainer Weg 4
D–56470 Bad Marienberg/Germany
Phone [phone]
Fax [phone] (Service)
Internet www.scholl-gastro.de
E-mail [e-mail]

GBA C 6001 12 E
BA Page 2 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
TABLE OF CONTENTS
Table of contents............................................................................................................................................... 2
Preface............................................................................................................................................................... 4
1General ...................................................................................................................................................... 5
1.1 Information about the user manual................................................................................................. 5
1.2Liability and warranty....................................................................................................................... 5
1.3 Copyright.......................................................................................................................................... 6
1.4 Declaration of conformity................................................................................................................ 6
2Safety......................................................................................................................................................... 7
2.1 General............................................................................................................................................. 7
2.2 Safety instructions for use of the device.......................................................................................... 7
2.3 Intended use .................................................................................................................................... 8
3Transport, packaging and storage ............................................................................................................. 9
3.1 Transport inspection ........................................................................................................................ 9
3.2 Packaging ......................................................................................................................................... 9
3.3 Storage............................................................................................................................................. 9
4Technical data.......................................................................................................................................... 10
4.1 Technical specifications.................................................................................................................. 10
4.1.1 Built-in hot or cold combiplate.................................................................................................. 10
4.1.2 Built-in hot or cold combiplate for central cooling system ....................................................... 11
4.1.3 Table top hot or cold combiplate .............................................................................................. 12
4.2 Product diagram............................................................................................................................. 13
4.2.1 Built-in hot or cold combiplate.................................................................................................. 13
4.2.2 Built-in hot or cold combiplate for central cooling system ....................................................... 13
4.2.3 Table top hot or cold combiplate .............................................................................................. 14
5Installation and operation ....................................................................................................................... 15
5.1 Safety information ......................................................................................................................... 15

GBA C 6001 12 E
BA Page 3 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
5.2 Installation and electric connection............................................................................................... 16
5.2.1 Installation of the hot or cold combiplate (only valid for installation variants) ........................ 16
5.2.2 Electrical connections................................................................................................................ 17
5.3 Operation ....................................................................................................................................... 17
5.3.1 Control panel............................................................................................................................. 18
6Cleaning and maintenance ...................................................................................................................... 19
6.1 Safety instructions for cleaning...................................................................................................... 19
6.2 Cleaning.......................................................................................................................................... 19
6.3 Safety instructions for maintenance.............................................................................................. 20
6.4 Maintenance.................................................................................................................................. 20
7Possible malfunctions.............................................................................................................................. 21
8Disposal ................................................................................................................................................... 22
9Installation drawings ............................................................................................................................... 23
9.1 Temperature controller hot or cold combiplate............................................................................ 23
10 Circuit diagrams.................................................................................................................................. 24
11 Warranty and service ......................................................................................................................... 25
11.1 Warranty conditions ...................................................................................................................... 25
11.2 Service............................................................................................................................................ 25
11.3 Service address .............................................................................................................................. 26

GBA C 6001 12 E
BA Page 4 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
PREFACE
Congratulations!
In purchasing this new SCHOLL appliance you have chosen a product which meets highest technical stand-
ards while providing outstanding convenience in practical use.
This appliance has been designed with minimal energy consumption in mind. Used responsibly, it will serve
you well in an ecologically sound manner.
Please read the information in this manual carefully before starting up this appliance. On the following
pages you will find important notes regarding its operation, care and maintenance so that you will be able
to enjoy its use for a long time.
If a malfunction should nevertheless occur, please consult the "Troubleshooting" section first. In many cases
you should be able to remedy minor problems yourself, thus saving unnecessary service costs.
Please retain this manual carefully and pass it on to any subsequent user for his or her information and
safety.
A quality product, properly treated, will give you many years of satisfactory service.
We trust you will enjoy using this product!
Yours sincerely
Gustav Scholl Apparatebau GmbH & Co. KG

GBA C 6001 12 E
BA Page 5 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
1 GENERAL
1.1 INFORMATION ABOUT THE USER MANUAL
This user manual describes the installation, operation and maintenance of the device and serves as an im-
portant source of information and reference.
The knowledge of all safety and handling instructions contained in the user manual creates the conditions
for the safe and proper operation of this device.
In addition, you must comply with all relevant local accident prevention regulations and safety regulations
concerning the permitted uses of the device.
The user manual is part of the product and must be accessible at all times in the immediate vicinity of the
device for the installation, operation, maintenance and cleaning staff.
1.2 LIABILITY AND WARRANTY
All information and instructions in this user manual have been compiled in accordance with cur-rent regula-
tions, the current state of engineering technology and our many years of knowledge and experience.
The actual scope of delivery may differ for special designs, utilization of additional order options or due to
the latest technical changes to the explanations and representations described herein. In case of questions,
please contact the manufacturer.
NOTE!
This user manual should be read carefully before starting work on and with the device, in particular be-
fore commissioning! The manufacturer accepts no liability for damage and faults that arise from non-
compliance with the operating instructions.
The user manual must be kept directly on the device and accessible to all persons working on or with the
device. We reserve the right to make technical changes to the product in the context of improving the us-
age properties and further development.

GBA C 6001 12 E
BA Page 6 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
1.3 COPYRIGHT
The user manual, including any text, drawings, images and other depictions, is protected by copy-right.
Reproduction in any manner and form - including excerpts - as well as the utilization and/or communication
of the content is forbidden without permission in writing from the manufacturer. Any non-compliance is
liable for damages. All other rights are reserved.
NOTE!
The graphical representations in this user manual may differ slightly from the actual design of the device.
1.4 DECLARATION OF CONFORMITY
The device corresponds to the latest standards and EU directives.
We certify this in the EC Declaration of Conformity.

GBA C 6001 12 E
BA Page 7 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
2 SAFETY
This section provides an overview of all-important safety aspects.
In addition, each chapter provides precise safety instructions for the prevention of dangers which are
marked with symbols. Moreover, the pictograms, signs and labels found on the device are to be observed
and kept in legible condition.
The observance of all safety information enables optimal prevention of all hazards and ensures safe and
trouble-free operation of the device.
2.1 GENERAL
The device is built according to the state-of-the-art technology. However, dangers may arise from this de-
vice if it is improperly used or not used according to its purpose.
Knowing the contents of the user manual is a prerequisite in order to protect yourself from danger, as well
as avoid mistakes and thus operate the device safely and without interference.
To avoid danger and to assure optimum performance, no modifications or alterations may be made to the
device that are not expressly approved by the manufacturer.
The device may only be operated in a technically perfect and reliable condition.
2.2 SAFETY INSTRUCTIONS FOR USE OF THE DEVICE
The specifications regarding operational safety are based on the regulations of the European Union valid at
the time of manufacturing of the device.
If the device is used commercially, the operator is obliged, during the entire period of use, to determine the
compliance of the designated occupational safety measures with the current state of regulations and take
note of new regulations. Outside the European Union, work safety laws and regional regulations applicable
at the place where the device is used must be observed.
Besides the industrial safety instructions in this user manual, the generally valid safety and accident preven-
tion regulations for the application of the device, as well as environment protection regulations, must be
observed and complied with.
ATTENTION!
This device is not intended for use by individuals (including children) with reduced physical, senso-
ry, or mental capabilities. It may also not be used by individuals who lack experience and/or
knowledge unless they are supervised by a person responsible for their safety or have received in-
structions on how to use the device from any such authorized person.
Children should be supervised to ensure that they do not play with the device.
Keep this user manual in a safe place. If the device is passed on to a third party, the user manual
must be handed over.
All persons using the device must comply with the specifications in the user manual and follow the
safety instructions.

GBA C 6001 12 E
BA Page 8 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
2.3 INTENDED USE
The reliability of the device is only guaranteed if used properly in accordance with the specifications in the
user manual.
Any technical interventions, assembly and maintenance are to be made by qualified service personnel.
The hot or cold combiplate is for keeping dishes warm or cool (not for warming or cooling) of prepared
dishes.
ATTENTION!
Any and all use diverting from and/or going beyond the limits of the device is forbidden and is considered
to be improper.
Any claims against the manufacturer and/or its agents for damages resulting from improper use of the
device are excluded.
The operator is liable for all damages resulting from improper use.

GBA C 6001 12 E
BA Page 9 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
3 TRANSPORT,PACKAGING AND STORAGE
3.1 TRANSPORT INSPECTION
The delivery must be checked immediately upon receipt for completeness and transport damage.
In case of visible transport damage, do not accept the delivery, or only do so conditionally.
The extent of the damage on the transport has to be marked on the documents / delivery note. Initiate
complaint.
A complaint regarding hidden damage has to be reported, immediately after discovery, as claims for dam-
ages can only be asserted within the effective period for complaints.
3.2 PACKAGING
Do not throw away the cardboard packaging of your device. It might be useful for storage purposes, when
moving or if the device needs to be sent to our service centre in case of damage. The outer and inner pack-
aging material has to be removed from the device before use.
NOTE!
If you want to dispose of the packing, consider the regulations applicable in your country. Recycle re-
usable packing materials.
Please check that the device and its accessories are complete. If any part is missing, please contact our
customer service center immediately.
3.3 STORAGE
Keep the package closed until installation, under consideration of the indicated positioning and storage
markings.
Store the packages under the following conditions:
Do not store outdoors.
Keep dry and free of dust.
Do not expose to aggressive media.
Protect from direct sunlight.
Avoid mechanical vibrations.
ATTENTION!
The device shall not be turned upside down.

GBA C 6001 12 E
BA Page 10 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
4 TECHNICAL DATA
4.1 TECHNICAL SPECIFICATIONS
4.1.1 BUILT-IN HOT OR COLD COMBIPLATE
Built-in hot or cold combiplate
Model-No.
CP 330
CP 330 RAL
CP 660
CP 660 RAL
CP 990
CP 990 RAL
Art.-No.
C 6001
C 6002
C 6005
C 6006
C 6009
C 6010
Facing
Stainless
steel
Glass
Stainless
steel
Glass
Stainless
steel
Glass
GN size
1/1
2 x 1/1
3 x 1/1
330 x 530 mm
660 x 530 mm
990 x 530 mm
Temperature range
-5°C to +140°C, continuously variable
Amount refrigerant
~ 38 g
~ 39 g
~ 40 g
Refrigerant
R600a
R600a
R600a
Heating capacity/cooling
performance
850/100 W
1520/100 W
2340/100 W
Noise level
49,9 dBA
59,3 dBA
59,3 dBA
Condensing temperature
-12,1°C
-12,1°C
-12,1°C
Power requirement
230 V, 50/60 Hz, ready to plug-in, connection cable with Schuko plug 1,6 m
Separate control panel
120 x 55 x 42 mm, controller with cable length 1,2 m
Dimensions L x W x H
330 x 530 x 160 mm
660 x 530 x 160 mm
990 x 530 x 160 mm
Grove in countertop:
Wood, stainless steel
Depth of groove:
surface of stainless steel
surface of glass
340 x 540 mm
11,5 mm
12,5 mm
670 x 540 mm
11,5 mm
12,5 mm
1000 x 540 mm
11,5 mm
12,5 mm
Grove in countertop:
Stone, marble, CORIAN
Depth of groove:
surface of stainless steel
surface of glass
344 x 544 mm
11,5 mm
12,5 mm
674 x 544 mm
11,5 mm
12,5 mm
1004 x 544 mm
11,5 mm
12,5 mm
Cutout size countertop
311 x 511 mm
641 x 511 mm
971 x 511 mm
Cutout size control panel
102,5 x 35 mm
102,5 x 35 mm
102,5 x 35 mm
Subject to modifications.

GBA C 6001 12 E
BA Page 11 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
4.1.2 BUILT-IN HOT OR COLD COMBIPLATE FOR CENTRAL COOLING SYSTEM
Built-in hot or cold combiplate for central cooling system
Model-No.
CPZ 330
CPZ 330 RAL
CPZ 660
CPZ 660 RAL
CPZ 990
CPZ 990 RAL
Art.-No.
C 6003
C 6004
C 6007
C 6008
C 6011
C 6012
Facing
Stainless
steel
Glass
Stainless
steel
Glass
Stainless
steel
Glass
GN size
1/1
2 x 1/1
3 x 1/1
330 x 530 mm
660 x 530 mm
990 x 530 mm
Temperature range
-5°C to +140°C, continuously variable
Refrigerant
R134a, R404a, R507a
Heating capacity/cooling
performance
850/100 W
1520/100 W
2340/100 W
Power requirement
230 V, 50/60 Hz, ready to plug-in, connection cable with Schuko plug 1,6 m
Separate control panel
120 x 55 x 42 mm, controller with cable length 1,2 m
Dimensions L x W x H
330 x 530 x 140 mm
660 x 530 x 140 mm
990 x 530 x 140 mm
Grove in countertop:
Wood, stainless steel
Depth of groove:
surface of stainless steel
surface of glass
340 x 540 mm
11,5 mm
12,5 mm
670 x 540 mm
11,5 mm
12,5 mm
1000 x 540 mm
11,5 mm
12,5 mm
Grove in countertop:
Stone, marble, CORIAN
Depth of groove:
surface of stainless steel
surface of glass
344 x 544 mm
11,5 mm
12,5 mm
674 x 544 mm
11,5 mm
12,5 mm
1004 x 544 mm
11,5 mm
12,5 mm
Cutout size countertop
311 x 511 mm
641 x 511 mm
971 x 511 mm
Cutout size control panel
102,5 x 35 mm
102,5 x 35 mm
102,5 x 35 mm
Subject to modifications.

GBA C 6001 12 E
BA Page 12 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
4.1.3 TABLE TOP HOT OR COLD COMBIPLATE
Table top hot or cold combiplate
Model-No.
CPA 330 W
CPA 330 SI
CPA 330 S
CPA 660 W
CPA 660 S
Art.-No.
C 6106
C 6107
C 6108
C 6109
C 6110
Facing
Glass
Glass
Glass
Glass
Glass
Housing
Stainless steel powder-coated
white
silver
black
white
black
GN size
1/1
1/1
1/1
2 x 1/1
2 x 1/1
330 x 530mm
330 x 530mm
330 x 530mm
660 x 530mm
660 x 530mm
Temperature range
-5°C to +140°C, continuously variable
Amount refrigerant
~ 38 g
~ 38 g
~ 38 g
~ 39 g
~ 39 g
Refrigerant
R600a
R600a
R600a
R600a
R600a
Heating capacity/
cooling performance
850/100 W
850/100 W
850/100 W
1520/100 W
1520/100 W
Noise level
49,9 dBA
49,9 dBA
49,9 dBA
59,3 dBA
59,3 dBA
Condensing tempera-
ture
-12,1°C
-12,1°C
-12,1°C
-12,1°C
-12,1°C
Power requirement
230 V, 50/60 Hz, ready to plug-in, connection cable with Schuko plug 1,6 m
Control panel
120 x 55 x 42 mm
Dimensions L x W x H
345 x 545 x
170 mm
345 x 545 x
170 mm
345 x 545 x
170 mm
675 x 545 x
170 mm
675 x 545 x
170 mm
Subject to modifications.

GBA C 6001 12 E
BA Page 13 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
4.2 PRODUCT DIAGRAM
4.2.1 BUILT-IN HOT OR COLD COMBIPLATE
Figure size 1 x 1/1 GN
4.2.2 BUILT-IN HOT OR COLD COMBIPLATE FOR CENTRAL COOLING SYSTEM
Figure size 1 x 1/1 GN

GBA C 6001 12 E
BA Page 14 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
4.2.3 TABLE TOP HOT OR COLD COMBIPLATE
Figure size 1 x 1/1 GN

GBA C 6001 12 E
BA Page 15 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
5 INSTALLATION AND OPERATION
5.1 SAFETY INFORMATION
WARNING! Risk of electrocution!
The device must be installed by qualified professionals.
Device may cause injuries due to improper installation!
Before installation, check the data of the local power grid with the technical specifications of the
unit (see nameplate).
Connect the device only if they match! Follow the safety instructions!
The device may only be operated when connected to a properly installed single socket with protec-
tive contact. Don’t use any multiply sockets. A safety switch is mandatory when installing a unit.
Do not pull the plug from the socket by the cable.
The power cord must not come into contact with hot parts.
WARNING! Hot surface!
During operation, some parts of the device become very hot. To avoid burns, do not touch hot parts!
Do not use this device if it is not working properly, is damaged or has been dropped.
Do not use any accessories and spare parts which are not recommended by the manufacturer.
These could pose a hazard to the user or cause damage to the device and cause personal injury,
and also void the warranty.
Do not lay the cable over carpets or other heat insulation. Do not cover the cable. Keep the cable
away from work areas and do not immerse in water.
Do not move the device during operation and do not tip it over.
Never heat food or liquids in sealed containers or bottles. This builds up a pressure which can
cause the container or bottle to explode.
The hot or cold combiplates must not be used as a storage area. Accidental activation or residual
heat can cause objects left there to melt or burn.
Make sure that the cable does not come into contact with heat sources or sharp edges. Do not
hang the cable off the table or counter.

GBA C 6001 12 E
BA Page 16 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
5.2 INSTALLATION AND ELECTRIC CONNECTION
5.2.1 INSTALLATION OF THE HOT OR COLD COMBIPLATE (ONLY VALID FOR INSTALLATION VARIANTS)
Put your device on a level and safe surface which stands the weight of the device.
Prepare the cut-out of the table according to our installation drawings and check the cut-out. A
silicone gap of 5 mm for wood and stainless-steel buffets all around the unit, and a gap of 7 mm for
stone and Dekton is mandatory. The maximum corner radius shall not be wider than the silicon
gap.
For Dekton (artificial stone) and stone plates please refer to the stone manufacturer’s references.
Make sure the surface is free from dust and grease.
Put your hot or cold combiplate into the cut-out. Please make sure that the hot or cold combiplate
fits exactly.
Connect the controller and both cables to the circuit board according to the connection plan.
Locate the hot or cold combiplate in the middle of the cut-out.
Grout the hot or cold combiplate with the silicone which is available in the accessories and remove
the excess silicone.
After a drying time of 24 hrs, you can connect the hot or cold combiplate to the power supply and
start to operate.
NOTE regarding the installation!
The device has to be installed in vertical position.
The hot or cold combiplate has to left in vertical position at least 15 minutes before operation.
The installation variants of the hot or cold combiplates can be built-in flush-mounted or sunk in
every top plate (wood, granite, corean or stainless steel; see installation drawing).
The supply and exhaust air must be ensured for all the plug-in units. The ambient temperature of
30°C mustn’t exceed in operation (heat accumulation) because the cooling performance decreases
and the device might get damaged. Please note that warm air rises. Please use parts of the wide
range of built-in accessories like fans or tubes in adverse built-in situations. Referring to this, the
qualified professional can give you some advices.
On-site supply and exhaust air must be taken into account when installing the devices in base
cabinets. The open cross-section for the supply air and exhaust air openings must be at least 200
cm², and the air should be able to flow freely over the cooling unit.
ATTENTION!
The device must be installed by a qualified professional.

GBA C 6001 12 E
BA Page 17 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
5.2.2 ELECTRICAL CONNECTIONS
The socket circuit must be secured according to the performance details.
Connect the controller to the circuit board.
Plug the Schuko plug into the socket.
Printed circuit board only for the following devices: C 6001, C 6002, C 6005, C 6006, C 6009, C 6010
5.3 OPERATION
Clean the device prior to use as described in chapter 6.2 Cleaning.
Press the button to switch on the device.
Do not place food directly on the surface. All foods should always be placed in appropriate con-
tainers on the surface of the hot or cold combiplate. Use only suitable tableware. Do not use plas-
tic tableware.
Do not use pots or pans with a bottom which has ridged edges or is unevenly enameled. This can
cause permanent scratches.

GBA C 6001 12 E
BA Page 18 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
5.3.1 CONTROL PANEL
The hot or cold combiplate can be set and operated via the touch control panel mounted on the front. The
five buttons are used for adjusting settings, switching (between heating or cooling mode), quick choice
between preset values, as well as parameterization. Only press the buttons using a finger or a Touchpen.
ON/OFF button
With this button the device is turned on or off.
When turning it on, the last selected mode starts.
Button
These buttons are for adjusting the temperature.
Button
By pressing the button, the adjusted tempera-
ture will be shown in the display. To change the
temperature press and either or , to
adjust the temperature accordingly.
Selection button
The button is used to switch between the heating
or cooling mode. The respective preset setpoint is
effective for control.
Display hot mode
The device is in heating mode.
Display cool mode
The unit is in cooling mode.
Digital display
Shows the actual and by pressing the button
the target temperature.
ATTENTION!
A change in the preset parameters should only be carried out by customer service.
When switching from heat to cooling mode, the compressor will only start once an actual temperature of
+40° C has been reached.
When turning the device off at a temperature over 40 °C, the ACTUAL temperature and OFF flash alter-
nately in the digital display.

GBA C 6001 12 E
BA Page 19 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
6 CLEANING AND MAINTENANCE
6.1 SAFETY INSTRUCTIONS FOR CLEANING
Before cleaning and before repairing, disconnect the device from the outlet (pull the plug!) and al-
low it cool.
Do not use caustic cleaning agents and make sure that no water seeps into the device.
To protect yourself from electric shock, do not immerse the device, cable or socket in water or
other liquids.
ATTENTION!
The device is not suited for direct washing with a water jet. Therefore, do not use a pressure water jet to
clean the device!
6.2 CLEANING
Clean the device regularly with a neutral cleaning agent!
Before cleaning the device, switch it off with the button and disconnect from the electrical
outlet (pull the plug!).
Leave the device to cool.
Afterwards clean the surface with a damp cloth.
Do not use abrasives that could scratch the surface of the hot or cold combiplates.
Never scrape the painted surface of the hot or cold combiplate with a knife, fork, metal scrapers or
other sharp objects, nor use abrasives, steel wool or similar.
Do not clean the joint between the frame and hot or cold combiplate with sharp objects.
After cleaning, use a soft cloth to dry and polish the surface.

GBA C 6001 12 E
BA Page 20 of 26 Mai 5, 2021
Last revised 05-2021 Rev. 12
Scholl Apparatebau GmbH & Co. KG
6.3 SAFETY INSTRUCTIONS FOR MAINTENANCE
Check the main cable for damage from time to time. Do not use the device if the cable is damaged.
If the cable is damaged, it must be replaced by customer service or a qualified electrician to avoid
risks.
In case of damage or malfunction, please contact your dealer or our customer service department.
Keep in mind the information on troubleshooting in section 7.
Maintenance and repair work may only be performed by qualified professionals using original
spare parts and accessories. Never try to carry out repairs to the device yourself.
6.4 MAINTENANCE
Check in regular periods if the grouting of the hot or cold combiplates has cracks and adjust it ac-
cordingly. Due to bad grouting, water can enter and lead to discolorations, breakage and loosening
of the surface.
Check in regular periods if the evaporator is dirty and let it clean by a qualified professional if nec-
essary.
Check the glass for damages before every use, before resuming operations to avoid injuries.
The hot or cold combiplate has to be heated up to high temperature regularly, to avoid humidity
and damages.