Schon LT400 User manual

Please leave this sheet and warranty for the customer for future reference
1 800 880-8164 USA
8 a.m. to 6 p.m. EST Monday-Sunday
For additional assistance or service call:
Para servicio o ayuda adicional, Ilame al:
Faucet Installation Model LT400 (Lever Handles)
Model LT500 (Cross Handles)
S-38
S-37 (ALLEN WRENCH)
S-01
Step 1- Install spout S-01 into
faucet body by pushing straight
down. Align spout facing forward
then tighten with allen screw S-38
(packaged separately with allen
wrench S-37). Do Not Over Tighten.
Step 2- Attach hot and cold risers S-21
to union nuts S-07 on back of faucet
body using one S-08 gasket on each
riser.
Step 3- Screw handle hub S-32
OR S-33 onto hot/cold cartridges
S-10 & S-12. Disassemble handle by
unscrewing spokes and install onto
cartridge. Secure with screw included.
Reassemble handle.
Step 7- Attach small end of
handshower hose S-18 with
washer S-20 to outlet below
diverter faucet spout.
Step 8- Attach large end of hand
shower hose S-18 to handshower
S-19 with washer S-20 and place
in holder S-05.
Step 9- Connect
preferred ½"male pipe
(supplied by installer)
into female threaded
riser S-21 from under
ooring. Make hot/cold
water connections. Turn
on water and check all
connections for leaks.
**NOTE: If using optional support brace U-SBRC
proceed to step 4a on page 2.
Step 4- Slide decorative escutcheons S-23 onto
bottom of risers S-21 and push part way up. Screw
oor anges S-24 onto bottom of riser threads S-21.
Step 5- Drill two 1-1/8" holes in oor on 8"centers in
desired location. Drop risers through holes and secure
to oor using oor anges S-24 and appropriate
screws/bolts (not included).
Step 6- Slide decorative escutcheons S-23 down to
oor to cover oor anges.
S-01
S-08
S-21
S-07
TUB
DRAIN
WHEN USING THE U-SBRC SUPPORT BRACE
IT MUST BE INSTALLED ON C-FRSR RISERS
PRIOR TO SECURING TO FLOOR.
SEE INSTALLATION ON PAGE 20.
(Tub model LCAT-167 does not have an exposed
drain and support brace will not be used.)
WASHER
C-FB1
C-FRSR
OPTIONAL SUPPORT
BRACE U-SBRC
S-24
MIN. 3-3/4"
MAX. 5-1/2"
S-23
S-21
S-19
S-20
S-18
S-05
S-20
C-HLVR
S-12
S-10
C-HCRS
S-32
S-33
Spokes
Screw
Spokes
LT400 LT500 (v2) (09/04/08) ©SCHON 2008
Fig. 1
Fig. 4 Fig. 5
Fig. 2 Fig. 3

Please leave this sheet and warranty for the customer for future reference
1 800 880-8164 USA
8 a.m. to 6 p.m. EST Monday-Sunday
For additional assistance or service call:
Para servicio o ayuda adicional, Ilame al:
Faucet Installation
S-21
S-15
S-16
S-06
S-01
S-02
S-03
S-04
S-05
C-HLVR
S-12 COLD
S-10 HOT
S-18
S-37
S-19
S-20
S-27
S-32
S-33 S-34
S-35 S-36
S-37
S-36
S-31
S-29
S-08
S-07
S-14
CHECK VALVE WITH
FLOW RESTRICTOR
S-08
S-13
S-17
CHECK VALVE
S-07
S-09
S-23
S-24
S-38
S-11
DIVERTER
C-HCRS
S-25
S-28
LT400 LT500 (v2) (09/04/08) ©SCHON 2008
Fig. 1 bracket assembly
Fig. 2 & 3 slide bracket
Fig. 4 bend strap Fig. 5 secure strap
4a. Assemble bracket as shown in g. 1.
4b. Slide support bracket onto risers.
4c. Bend metal strap around drain to create a clamp.
Secure with screw provided. Recommended height is
just below drain overow.
4d. Proceed with step 4 of faucet installation.
SET SCREW
SET SCREW
SET SCREW
Model LT400 (Lever Handles)
Model LT500 (Cross Handles)
Components used:
C-FB1 Faucet Body
C-FRSR Floormount Risers
C-HLVR Lever Handles (LT400)
C-HCRS Cross Handles (LT500)