Schwaiger DSR 6020 User manual

Digital Satellite Receiver
DSR 6020
Operating manual
Modifications and errors reserved.
We do not assume any liability for printing errors.
Dear customer,
Having in mind an environmentally friendly behaviour we
ask you to switch off your receiver after usage by
operating the mains switch at the rear side of the device.
With this, you contribute to the protection of the
environment and save money.

Remote control
1
Standby
Switches on and to the standby mode
2
ZOOM
Enlarges TV image
3
LIST
Invokes TV channel list
4
TIMER
Invokes timer
5
TEXT
Invokes Teletext
6
MUTE
Turns off sound
7
M/P
Multi-picture function, invokes thumbnail view
8
V+
Increases volume/cursor moves to the right
9
OK
In normal mode: invokes current channel list In a
menu: confirms menu item
10
CH !
Switches to the next lower channel location/
cursor moves down
11
FAV
Invokes own favourites list
12
RECALL
Switches to previously selected channel
13
PAUSE
Stills the frame
14
INFO
Displays reception data of the current channel
(satellite-finder function)
15
0–9
Selects channel directly, numerical input
16
P–
In normal mode: changes channel group
In TV channel list: Ten-key block commutation
17
P+
In normal mode: changes channel group
In TV channel list: Ten-key block commutation
18
V–
Decreases volume/cursor moves to the left
19
CH "
Switches to the next higher channel location/
cursor moves up
20
MENU
Invokes main menu
21
EXIT
Exits menu or menu item
22
AUDIO
Changes audio mode
23
EPG
Invokes Electronic Programme Guide (if offered by
the broadcasting station)
24
TV/SAT
Switches between terrestrial and satellite antenna
25
TV/RADIO
Switches between TV and radio mode

4
Preface
This operating manual will help you in the
•appropriate
•safe
•favourable
usage of the digital satellite receiver, in short, the
“receiver”. We assume that the user of the receiver has
overall knowledge regarding the handling of audio and
video equipment.
Each person who
•installs
•connects
•operates
•cleans
•disposes of
this receiver must be familiar with the entire content of
this operating manual. Always keep this operating
manual in the proximity of the receiver.
Style features
Specific style features have been used in different
sections of the operating manual. Thus, you can easily
differentiate whether it concerns
normal text,
•enumerations
or
!actions.

5
Contents
Preface............................................................................ 4
Style features ................................................................. 4
Contents ......................................................................... 5
Safety instructions......................................................... 7
Basic safety instructions ........................................... 7
Explanation of safety instructions .................................. 11
Appropriate use ............................................................. 11
Scope of supply ........................................................... 12
Description ................................................................... 13
Connecting the receiver.............................................. 17
LNB cable installation .................................................... 18
Connection with the HDMI cable ................................... 21
Connection with the SCART cable ................................ 23
Audio connection mit Cinch-Kabel................................. 25
Connection of an audio-digital receiver ......................... 27
Connection and rough direction of the antenna............. 29
Getting started ............................................................. 34
Remote control............................................................... 34
The receiver................................................................... 36
Operation...................................................................... 37
Screen-inlays while switching channels......................... 37
User interface on the TV screen .................................... 39
Menu structure............................................................... 40
Menu navigation ............................................................ 41
Channel (symbol: TV) .................................................... 42
Installation (symbol: satellite antenna)........................... 48
System Setup (symbol: receiver)................................... 52
Tools (symbol: tool case)............................................... 58

6
Software update via satellite.......................................... 59
Keys with special functions........................................ 60
Switch between TV and SAT ......................................... 60
Switch between TV and radio ........................................ 60
ZOOM ............................................................................ 60
LIST ............................................................................... 61
AUDIO............................................................................ 61
EPG ............................................................................... 61
TEXT.............................................................................. 62
M/P................................................................................. 62
MUTE............................................................................. 63
FAV................................................................................ 63
RECALL......................................................................... 63
INFO - acoustic signal for directing the satellite
antenna.......................................................................... 64
0 - Sleep timer................................................................ 64
PAUSE........................................................................... 64
Uninstalling the receiver ............................................. 65
Cleaning........................................................................ 65
Tips & tricks/trouble shooting.................................... 66
Disposal........................................................................ 69
Specifications............................................................... 70
Manufacturer ................................................................ 72
Guarantee ..................................................................... 73
Conformity hints .......................................................... 74
Glossary........................................................................ 75

7
Safety instructions
Please read the safety instructions carefully before
operating the receiver.
Please follow all warnings and instructions on the
equipment and in the operating manual.
Basic safety instructions
Electrical connection
•Separate the receiver from the power source in case
of operational disruptions. Please note: The receiver
will remain live, even if it is turned off with the mains
switch on the rear side.
•Do not expose the receiver to rain or any kind of
humidity to avoid risk of fire and electric shock.
•Never open the casing. Otherwise, there is a risk of
electric shock.
•Connect the receiver only to a professionally installed
mains socket of 100–240 V~, 50–60 Hz.
•The total power consumption by the antenna
connection of the receiver “LNB IN” must not exceed
300 mA.
•Pull out the mains plug from the socket if the
equipment is not in use for a longer period of time.
Only pull at the mains plug, not at the cable.
•In case of storms pull out the mains plug of the
receiver from the socket.
•In case of a storm, loosen the LNB cable from the
receiver.

8
•If foreign bodies or fluids enter the receiver,
immediately pull out the mains plug from the socket.
Ask a qualified person to check the equipment before
operating it again. Otherwise, there is a risk of electric
shock.
•Ensure that the power source (socket) is easily
accessible.
•Do not bend or crimp the mains cable.
•If the mains cable is damaged, the
receiver must be repaired by an expert before reusing
it. Otherwise, there is a risk of electric shock.
•Never allow children to operate the receiver or to play
with the antenna unit unless supervised.
•Always ask qualified personnel to carry out
maintenance jobs. Otherwise, you are putting yourself
and others at risk.
•Disconnect the receiver from the power source in case
of operational disruptions.
•Spare parts must be ordered directly from the
manufacturer
•Modifications of the device lead to an extinction of the
manufacturer’s liability.
•Remove the protection films.
Caution!
Note regarding separation from the mains supply. The
Standby key of this device does not separate the
device completely from the mains supply. In addition,
the device consumes current in standby mode. To

9
separate the device completely from the mains supply,
the mains plug must be pulled out of the socket.
Suitable location
•Place the receiver on a stable and even base.
•Avoid proximity to:
-heat sources, like e. g. heaters,
-naked flames, like e. g. candles,
-devices with strong magnetic fields, like e.g.
loudspeakers.
-Never place receptacles filled with liquid (e. g.
vases) on the receiver
•Avoid direct sunlight and places with an extremely high
amount of dust.
•Never cover ventilation slits. Ensure adequate
ventilation of the receiver.
•Do not place any heavy objects on the receiver.
•Humidity may settle in the receiver if it is brought into
hot surroundings from a cold one. In this case, wait for
about an hour before operating the equipment.
•Arrange the mains and antenna cable in such a
manner that no-one steps or trips over them.

10
Correct battery handling
•Batteries may contain toxic agents. Ensure that
batteries are not within the reach of children. Children
may eat and swallow batteries.
•Batteries that are getting discharged may damage the
remote control. If the receiver is not in use for a longer
period of time, remove the batteries from the remote
control.
•Batteries may contain toxic agents. Therefore, dispose
of the batteries immediately in an ecologically
accepted manner according to the prevailing statutory
regulations. Never throw the batteries into normal
household waste.
•Never expose the batteries to open fire or strong heat,
as otherwise there is a danger of explosion.
•Replace the batteries always by batteries of the same
type.

11
Explanation of safety instructions
The following categories of safety instructions are
included in this operating manual:
Danger!
Instructions with the word DANGER give a warning
against possible personal injuries.
Caution!
Instructions with the word CAUTION give a warning
against possible material or environmental damages.

These instructions contain special information
regarding an economic use of the receiver.
Appropriate use
The receiver is designed for receiving unencrypted digital
satellite channels (free-to-air, SDTV) for private use. It is
exclusively meant for this purpose and must only be used
for the same. This also includes paying attention to all
information contained in this operating manual, especially
in the safety instructions.
Any other usage is considered to be improper and may
lead to material damages and even personal injuries.
Moreover, it will result in the immediate loss of guarantee.
The manufacturer does not bear any liability for damages
caused due to improper use.

12
Scope of supply
Check the scope of supply after purchase. The scope of
supply may vary according to the type of the receiver.
Please follow the information on the packaging.
No.
Pieces
Description
1
1
Receiver
2
1
Remote control
3
2
Batteries type AAA/1.5 V
-
1
Operating manual (not shown above)

13
Description
With this receiver you are able to receive unencrypted
digital satellite channels (free-to-air) via satellite antenna.
It is not necessary to programme the receiver yet.
The most important broadcasting stations and
satellites have been pre-programmed.
The satellite antenna has to be directed towards the
desired satellite.
The receiver will scan for further new channels as soon
as you initiate the automatic scanning of broadcasting
stations for this satellite. Satellites not preset may be
added.
All receiver settings can be done easily using the user
interface (menu) on the TV monitor.
The multilingual user interface supports following
languages:
•german
•italian
•spanish
•greek
•english
•polish
•czech
•slovakian
•hungarian
•danish
•french

14
•swedish
•croatian
•dutch
•norwegian
•finnish
•slovenian
•turkish
•portuguese
The following satellites have been preset by the
company:
•ASTRA1 19,2°E
•Hotbird 13,0°E
•Türksat 42°E
•ASTRA2 28,2°E
•Sirius2 5,0°E
•Amos/Atlantic 4-5°W
•HispaSat 30°W
•Eutel W2 16°E
•HellasSat 39°E
•ASTRA 23,5°E
Other features of the equipment:
•Software update via satellite ASTRA1 19.2° E or via
the RS232 connection on the rear side of the device.
•Saves the channel last watched (Last Channel
Memory)
•LNB control logic (sound 0/22 kHz), max. current
delivery for LNB 300 mA

15
•Symbol rate 2-35 MS/s and 950-2150 MHz input
frequency
•Manual PID entry possible
•3 keys at the frontage
•plug & play
•The power draw in standby mode is 2W only.
•100–240 V~, 50/60 Hz mains connection
•4500 channel storage locations
•Child lock (preset password: 0000)
•1 favourites list and 8 channel groups
•Automatic scanning of broadcasting stations
•List editor for broadcasting stations
•Analogue sound output through Cinch connector
(stereo), volume adjustment possible via remote
control
•AC3 coaxial output (digital audio)
•2 Euro-SCART connections for TV and video set
(VCR)
•HDMI-connection
•Loop-through-function in standby mode for the
connection of an analogue receiver
•Super fast videotext with a memory of 800 pages
•Digital radio reception, background image for radio
(background display)
•Additional channel information is displayed when the
channel is changed.
•DiSEqC 1.0, 1.2, USALS is supported if an appropriate
antenna unit is connected

16
•SWAP function (via Recall key)
•Screen aspect ratios can be set to 4:3, 16:9, and
automatically (letterbox)
•8x multi-functional timer linked with EPG, sleep timer
•Electronic Programme Guide EPG (up to 14 days in
advance, channel-dependent)
•SCPC/MCPC reception standard C/Ku-band satellites
•Automatic selection of the TV standard with video
converter
•Digital satellite finder for optical and acoustic
adjustment of the paraboloidal-type reflector
•100–
240 V~,
50/60 Hz
mains
connection
•4500
channel
storage
locations
•Child lock
(preset
password:
0000)
•1
favourites
list and 8
channel
groups
•Automatic
scanning
of
broadcasti
ng stations
•
•
•

17
Connecting the receiver
The receiver is connected with your satellite antenna by
means of a coaxial cable. If necessary, you have to
prepare a coaxial cable before connecting the receiver.

The coaxial cable is not included in the scope of
supply.
Caution!
Connect the receiver to the mains supply only after you
have connected it to all equipment and the antenna
properly. Otherwise, the receiver can suffer damages.
The wire netting and the inner core of the coaxial cable
carry current during operation.

18
LNB cable installation
(cp. installation diagram on the next page)
For the installation of the F connector on the coaxial
cable you will need a knife (ideally a wire stripper) and
side cutting pliers.

When stripping the isolation, neither the inner
core or the foil nor the wire netting must be
damaged.
!Cut 8 mm of the coaxial cable at each end up to the
inner core.
!Carefully cut 10 mm of the outer insulation so that the
wire netting is exposed.
!Turn the wire netting backwards and wind it over the
outer insulation in such a manner that it does not touch
the inner core.
!Remove the inner insulation together with the foil
placed over it up to 2mm before reaching the wire
netting.
Caution!
The wire netting and the foil must not touch the inner
core. The foil must enclose the inner insulation and
must not be damaged.
!Rotate the F connector onto the turned-back wire
netting until the connector touches the inner insulation.

The wire netting must not protrude from the back
of the connector end.

19
!Cut the inner core with a cable cutter in such a manner
that it projects maximum 1 mm from the connector.

20
Installation diagram
!Fasten the F connector of the coaxial cable onto the
“LNB IN” antenna connection of the receiver. Fasten
the other end of the coaxial cable on the LNB.