Schwinn 170i Upright Bike User manual

ASSEMBLY MANUAL / OWNER’S MANUAL
170i
This product is compliant with the
applicable CE requirements.

2
Important Safety Instructions - Assembly 3
Safety Warning Labels / Serial Number 4
Specifications 5
Before Assembly 5
Parts 6
Hardware 7
Tools 7
Assembly 8
Leveling the Bike 14
Moving the Bike 14
Important Safety Instructions - Owner’s 15
Features 16
Console Features 17
Remote Heart Rate Monitor 20
Operations 22
Adjustments 22
Initial Setup 22
Quick Start / Manual Program 23
User Profiles 23
Profile Programs 25
Pausing or Stopping 28
Results 28
GOAL TRACK Statistics 28
Console Setup Mode 30
Maintenance 31
Troubleshooting 33
Nautilus, Inc., www.NautilusInc.com - Customer Service: [email protected] | Nautilus, Inc., 18225 NE Riverside Parkway, Portland, OR
97230 USA | © 2013 Nautilus, Inc. | ® indicates trademarks registered to Nautilus, Inc. in the United States. These marks may be registered in
other nations or otherwise protected by common law.
Table of ConTenTs
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty, contact your local distributor.
If you have questions or problems with your product, please contact your local Schwinn®distributor.
To nd your local distributor, go to: www.nautilusinternational.com

3
ImporTanT safeTy InsTruCTIons
— assembly
!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
!Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
• Keepbystandersandchildrenawayfromtheproductyouareassemblingatalltimes.
• Donotconnectpowersupplytothemachineuntilinstructedtodoso.
• Donotassemblethismachineoutdoorsorinawetormoistlocation.
• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafcandexposuretobystanders.
• Somecomponentsofthemachinecanbeheavyorawkward.Useasecondpersonwhendoingtheassemblysteps
involvingtheseparts.Donotdostepsthatinvolveheavyliftingorawkwardmovementsonyourown.
• Setupthismachineonasolid,level,horizontalsurface.
• Donottrytochangethedesignorfunctionalityofthismachine.Thiscouldcompromisethesafetyofthismachine
and will void the warranty.
• Ifreplacementpartsarenecessary,useonlygenuineNautilus®replacement parts and hardware. Failure to use
genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the
warranty.
• Donotuseuntilthemachinehasbeenfullyassembledandinspectedforcorrectperformanceinaccordancewiththe
Manual.
• ReadandunderstandthecompleteManualsuppliedwiththismachinebeforerstuse.KeeptheManualforfuture
reference.
• Doallassemblystepsinthesequencegiven.Incorrectassemblycanleadtoinjuryorincorrectfunction.
• Thisproductcontainsmagnets.Magneticeldscaninterferewiththenormaluseofcertainmedicaldevicesataclose
range.Usersmaycomeintoproximityofthemagnetsintheassembly,maintenance,and/oruseoftheproduct.Given
the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical
providerinconnectionwiththeuseofthisequipment.Pleaseconsultthe“SafetyWarningLabelsandSerialNumber”
section to determine the location of the magnets on this product.

4
safeTy WarnIng labels and serIal number
•Lisez et assimilez tous les avertissements
apposés sur cet appareil.
•Gardez les enfants et les animaux de
compagnie éloignés de cette machine en
tout temps
•Déconseillé aux enfants âgés de
moins de 14 ans.
•Lisez et familiarisez-vous avec le Manuel
du propriétaire et avec tous les
avertissements avant d’utiliser cette
machine.
•Soyez prudent lorsque vous utilisez cet
équipement pour ne pas vous infliger de
graves blessures.
•Cette machine supporte un poids
maximal de 300lbs. (136kg).
•Remplacez toute étiquette
d’avertissement endommagée, illisible
ou manquante.
•La fréquence cardiaque qui s’affiche
sur la console peut être inexact et
doit être utilisée seulement à titre
indicatif.
•Read, understand and obey all
warnings on this machine.
•Keep children away.
• Not intended for use by anyone
under 14 years of age.
•Prior to use, read and understand
the Owner’s Manual.
•Injury or death is possible if
Caution is not used while using this
machine.
•The maximum user weight for this
machine is 300 lbs (136 kg).
•Replace any “Caution”, “Warning”
or “Danger” label that is illegible,
damaged, or removed.
•The heart rate displayed may be
inaccurate and should be used for
reference only.
8002739_A
Serial number
Product
specification

5
speCIfICaTIons
105cm (41.3”) 54cm (21.4”)
141cm (55.6”)
Maximum User Weight: 136 kg (300 lbs.)
Total Surface Area (footprint) of equipment: 5670 cm2
Machine Weight: 28.5 kg (62.3 lbs.)
Power Requirements:
Operational Voltage: 220V - 240V AC, 50Hz
Operating Current: 0.4A
Regulatory Approvals
AC Power Adapter: CE compliant.
This product conforms to the applicable EN ISO 20957 International Standards for Stationary Training Equipment, Class S
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard,
levelsurface.Allowaworkoutareaofaminimum2.3mx1.8m(90”x70”).
Basic Assembly Tips
Follow these basic points when you assemble
your machine:
• Readandunderstandthe“ImportantSafety
Instructions”beforeassembly.
• Collect all the pieces necessary for each
assembly step.
• Using the recommended wrenches, turn the
bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, gently lift and look
through the bolt holes to help insert the bolt
through the holes.
• Theassemblyrequires2people.
0.6m
24”
1.8m
70”
2.3m
90”
0.6m
24”
0.6m
24”
0.6m
24”

6
parTs
Item Qty Description Item Qty Description
1 1 Main Frame 9 1 Seat Post
2 1 Front Stabilizer 10 1 Adjustment Knob
3 1 Rear Stabilizer 11 1 Seat
4 1 Top Shroud 12 1 Left Pedal (L)
5 1 Mast Gasket 13 1 Right Pedal (R)
6 1 Console Mast (with Handlebar Mount) 14 1 Water Bottle Holder
7 1 Handlebars 15 1 AC Adapter
8 1 Console 16 1 Handlebar Mount Cover
Note: Media Cable is in a bag.
12 (L)
13 (R)
11
7
1
2
4
8
5
14
3
9
15
10
616

7
HardWare / Tools
Tools
Included
6 mm
Item Qty Description
A 4 ButtonHeadHexScrewM8x25
B 5 Lock Washer M8
C 4 Curved Washer M8
D1 Flat Washer M8
E 1 T-handle
DE

8
assembly
1. Attach Stabilizers to Main Frame
Note: Hardware(*) is pre-installed on the stabilizers and not on Hardware Card. Make sure transport wheels on the
front stabilizer point forward, and the Schwinn®decal on the rear stabilizer faces outward from the machine.
2. Install Console Mast, Mast Gasket and Top Shroud on Main Assembly
NOTICE: Make sure the Console Cable connector (a) does not fall into the Console Mast. Align the clips on the cable
connectorsandmakesuretheconnectorslock.DonotcrimpConsoleCable.BesurethetabsontheTop
Shroud snap into the Main Assembly.
X2
X2
6 mm
6 mm
*
*
*
*
*
*
6
5
4
A
6 mm
CB
X4
a

9
3. Install Handlebars on Console Mast
NOTICE:Donotcrimpthecables.PuttheHandlebar(7)inthebracket(6a),adjusttheHandlebartothedesiredangle,
and install the T-handle (E) through the holes. Use the pull cable in the Handlebar Mount to route the HR
cable (7a) through the slot (6c) under the Handlebar Mount to the top of the mast. Fully tighten the T-handle
to keep the Handlebar in position. Push the cover (16) into position on the Handlebar Mount.
7
6a
16
E
6a
E
D
B
7
6a
D
B
7a
E
7a
7
6c

10
4. Install Console on Console Mast
Note: Remove the pre-installed screws(*) from the back of the Console before you connect the cables.
NOTICE: Donotcrimpthecables.
8
X4
#2
*
X4
#2
8
*