Schwinn 250 User manual

SCHWlNN_
Manual en Esp¢_ol LaSno ArYericano_
http://www_schwinnfitnes_ s_cor_ ASSEMBLY MANUAL / OWNER'S MANUAL

Important Safety Instructions - Assembly 3
Safety Warning Labels /Serial Number 4
Specifications 5
Before Assembly 5
Parts 6
Hardware 7
Tools 7
Assembly 8
Moving the Bike 21
Leveling the Bike 21
Important Safety Instructions 22
Features 23
Console Features 24
Remote Heart Rate Monitor 26
Operations 29
Adjustments
Initial Setup
Quick Start /Manual Program
Guest User /Profile Program
User Setup Mode
Profile Programs
Fitness Test
Heart Rate Control Workout
Distance Goal Workout
Results/Cool Down Mode
Pausing or Stopping
User Statistics
Console Setup Mode
Maintenance
Troubleshooting
29
30
31
31
32
36
37
37
38
38
39
39
41
43
46
Tovalidatewarrantysupport,keepthe originalproofof purchaseand recordthe following information:
Serial Number
Dateof Purchase
Toregisteryourproductwarranty, goto: www.SchwinnFitness.com/register
Orcall 1(800) 605=3369.
ifyouhavequestionsor problemswithyourproduct,pleasecall 1(800) NAUTILUS(628-8458).
Nautilus, Inc., (800) NAUTILUS /[phone], www.Nautiluslnc.com - Customer Service: North America
[phone], [email protected] I outside U.S. +01-360-859-5180, [email protected] I
Printed in China I© 2011 Nautilus, Inc., All rights reserved. TMand @indicate a trademark or registered
trademark. Nautilus, Inc. (www.Nautiluslnc.com) trademarks include NAUTILUS@, BOWFLEX@, SCHWINN@
and UNIVERSAL@ and respective Iogos. Other trademarks are the property of their respective owners

,_, This icon means a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
Obeythe following warnings:
o
o
o
o
o
o
_, Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
Keep bystanders and children away from the product you are assembling at all times.
Do not connect power supply to the machine until instructed to do so.
Do not assemble this machine outdoors or in a wet or moist location.
Make sure assembly is done in an appropriate work space away from foot traffic and exposure
to bystanders.
Some components of the machine can be heavy or awkward. Use a second person when
doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or
awkward movements on your own.
Set up this machine on a solid, level, horizontal surface.
Do not try to change the design or functionality of this machine. This could compromise the
safety of this machine and will void the warranty.
• If replacement parts are necessary, use only genuine Nautilus® replacement parts and
hardware. Failureto use genuine replacement parts can cause a risk to users, keep the
machine from operating correctly and void the warranty.
Do not use until the machine has been fully assembled and inspected for correct performance
in accordance with the Manual.
Read and understand the complete Manual supplied with this machine before first use. Keep
the Manual for future reference.
Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect
function.

Keep children away.
Prior to use, read and understand the
Owners Manual.
Injury or death is possible if Caution is not
used while using this machine.
The maximum user weight for this
machine is 300 Ibs (136 Kg).
Replace any "Caution" "Warning" or
"Danger" label that is illegible, damaged,
or removed.
This machine is for home use only.
Gardez les enfants et les animaux de compagnie
&loign_s de cette machine en tout temps.
Lisez et familiarisez-vous avec le Manuel du
propri_taire et avec tous les avertissernents avant
d'utiliser cette machine.
Soyez prudent Iorsque vous utilisez cet
&quipement pour ne pas vous infliger de graves
blessures.
Cette machine supporte un poids maximal de
30Olbs. (136kg).
Remplacez toute _tiquette d'avertissement
endommag_e, illisible ou manquante.
Cette machine est & usage domestique
uniquement. 003-5800
f SerialNumbe>r
00000000000000000000000
FCCCompliance
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.

\
MaximumUserWeight:
PowerRequirements:
Operational Voltage:
Operating Current:
Regulatory Approvals:
AC Power Adapter:
300 Ibs. (136 kg)
Operational Voltage 9VDC
1500 mA
UL listed, CSA certified (or
equivalent), Rated 120V 60Hz
Input, 9VDC, 1500mA Output.
Class 2 or LPS.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the
location must be on a hard, level surface. Allow a workout area of a minimum 103" x 65" (2.6m x
1.7m).
BasicAssemblyTips
Follow these basic points when you assemble your machine:
• Read and understand the "Important Safety Instructions" before assembly.
Collect all the pieces necessary for each assembly step.
Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless instructed otherwise.
When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt
through the holes.
The assembly requires 2 people.

2
15
16 14
17 13
7 8
10
12
ioi
11
Item Qty Description Item Qty Description
1 1 Rear Stabilizer 10 1 Seat Bottom
2 1 Front Stabilizer 11 1 Seat Rail *
3 1 Seat Frame 12 1 Console Mast
4 1 Frame 13 1 AC Adapter
5 1 Console 14 1 Left Pedal
6 1 Console Bracket 15 1 Right Pedal
7 1 Handlebar Bracket 16 1 Upright Handlebar
8 1 Seat Rail Bracket * 17 1 Side Handlebar
9 1 Seat Back
* Pro-installed on Frame (Item 4).

i i
J_
i i
i
i
B G H
item Qty Description item Qty Description
A 1 Carriage Bolt, M8x85 H 1 Mounting Bracket
B 1 Hex Bolt, M8x85 I 2 Hex Bolt, M7x30
C 1 Console Tilt Adjustment Knob J 4 Curved Washer, M8
D 8 Button Head Hex Screw, M8x16 K 4 Cap
E 1 Lock Nut, M8 L 8 Button Head Hex Screw, M8x45
F 4 Hex Screw, M8x16 M 2 Lock Washer, M6
G 14 Flat Washer, M8 N 2 Flat Washer, M6
Tools
Included NotIncluded
(recommended)
6mm

1. RemoveSeatRailfromFrameandDisconnectHeartRateCable
NOTICE: Make sure that the heart rate cable does not fall into the frame tube. Hardware is
not on hardware card.
4X7
11
=Remove Seat Rail Bracket from Seat Rail
NOTICE: Hardware is not on hardware card.
8
\\, \
\
X2

=
X4
4. AttachSideHandlebarto SeatFrame

5.AttachSeatPadsto SeatFrameAssembly
X8
10
/I
I,II I
/_/ ,
/ l
I '\
\
ft.LoosenandPulltheSeatPostAdjustment Knobto SlideSeatAssemblyontoSeatRail
NOTICE: Do not crimp the Heart Rate ©able.
Note: Lock the Adjustment Knob intoone of the Seat Rail lockingholes.
11
\

7.ConnectHeartRateCableto SeatAssembly
NOTICE: Do not crimp the Heart Rate Cable.
8.AttachSeatRailBracketto SeatRailAssembly
NOTICE: Do not crimp the Heart Rate Cable. Hardware was pre-installed and not on
hardware card.
/ /i/ i/i
i' I i"
,/"
/
/
/
/
82

9.AttachSeatRailAssemblyto FrameAssembly
NOTICE: Do not crimp the Heart Rate Cable. Hardware was pre-installed and not on
hardware card.
/
/
/
f
X7
D

10.AttachConsoleMastto FrameAssembly
NOTICE:Align the clips on the cable connectors and make sure the connectors lock. Do
not crimp Console Cable.
/
/ /
i /
/ //
/ /
/" j
j//
/
/
,/ /
/
/
/
/

11.Attach UprightHandlebarto ConsoleMast
16
\ \
\ \
\\ ,
// //
C -_ .....

12.AttachConsoleBracketto ConsoleMast
NOTICE: Do not crimp the cables.
!\!

13.RemoveHardwarefrom Console
NOTICE: Do not crimp the cables.
Note: Hardware is pre-installed *

14.ConnectCablesandAttachConsoleto FrameAssembly
NOTICE:Align the clips on the cable connectors and make sure the connectors lock. Do not
crimp Console Cable. Do not fully tighten the hardware.
/
// /
/
//

15.Adjustand Tighten the ConsoleMast and Console
NOTICE:Tighten hardware and install Caps.
X4

16.AttachPedalsto FrameAssembly
15
14

17.ConnectACAdapterto FrameAssembly
/
/j
j/ /
/ /
/' j
{/
j' i
\
]/
13
18.Finalinspection
Inspect your machineto ensurethat all hardware istight and components are properly assembled.
_ o not use until the machine has beenfully assembled and inspected for correct performance in
accordance with the Owner's Manual.