Sciener M301 User manual

Installation manualM301 Security Door Lock - 170725 - rev3.0
Find more information and help for your product at the following
Ocial website: http://www.sciener.co
Please read this manual carefully before installation
Anti-theft door lock
Product Installation and Parts List
Note: The door lock frame is greater than 110mm, and the door thickness can
be installed in the range of 40mm ~ 100mm.
●
Model
Dimensions
Material
Weight
Communication Methods
Supporting systems
Stand-by current
Operating current
Power supply
Unlock time
M301
W68mm x H155mm x T76mm (with handle)
Shell zinc alloy / lock body iron
2.0KG (with lock body)
Bluetooth 4.0ble
Android 4.3 / iOS 7.0 above
≈35µA
≈200 mA
4 AA Alkaline 1.5V Batteries (LR6) (6V)
≈1.5 second
(M4*20)3Piece(M4*16)3Piece
Mechanical
Keys x 2
71mm spindle. Applicable
door thickness: 50-55mm
66mm spindle. Applicable
door thickness: 44-49mm
59mm spindle. Applicable
doorthickness: 38-43mm
(M4*25)3Piece (M4*30)3Piece
Front panel
Back panel
Front panel
rubber gasket
Back panel
rubber gasket
2.5mm hex wrench Contains: brochures, openings template
Please contact us at [phone] for assistance with installation, commission-
ing, etc. that have not been listed in the user's installation manual.
The performance of this product is under continuous improvement, subject to
change without notice.
●
●
Deadlatch
Strike plate
Strike box
Package list:

Precautions before installing and adjusting the door lock
Set up the lock function before installing
Add & delete password or Bluetooth administrator
Before installing the lock, please check that all the accessories are present. If your
door needs to drill holes across, please seek professional help in order to avoid
unnecessary property damage.
Before installation, connect the front panel of the lock to the back panel, bind the
lock with the app, and then install the lock to the door after setting up.
How to connect front and back panels
Remove the power cables from the front and back panels and connect the power
cables as shown in the figure.
●
●
Sciener App QR scan and download
Visit the ocial website: http://www.sciener.co and
download the newest app or scan the QR code on
the left side to download.
Unlock key
Function key
2
1
Back panel
connector
Front panel
connector
Pair with app using bluetooth
After power is on, while the front panel touchscreen backlight is o:
1. Tap the touch screen to active
2. Open the app
3. Tap "profile "picture"- "+add lock" on the top left corner, select door lock.
4. Select the lock device name that is found. After adding successfully,
the page will jump to the lock list;
If not successful, repeat the above steps or long press the back panel adapter
and try again.
NB

Install deadlatch and lock cylinder
Please install under the guidance of a professional.
In case of special circumstances, please handle the lock gently in order to avoid
damage!
●
●
Installation Notes
If your door lock hole, panel mounting holes and our products do not match,
experts need to refer the illustration [drilling hole]and adjust the hole,
non-professionals do not drill holes, to avoid causing damage！
Warning
screw
screw
step (1)

7
7
4
2
1
5
3
6
Installation steps
Step 1: Fix the back panel to the door according to figure ①
Step 2: Place the front rubber plate (figure ②) and the fixed plate (figure ③) and fix the 2 screws
as shown in Figure ④
Step 3: Take the front panel and connect the power cable (figure ⑤), through the hole in the door
Step 4: Select the spindle that fits, and according to figure ⑥, insert through the hole in the door
to the back panel handle (size selection see: product installation and Parts list)
Step 5: See figure ⑦, and insert and tighten three screws, insert battery and the battery cover to
complete installation.
Before installation / back panel

Micro USB
Emergency Power
Supply port
Emergency Power Interface on the Front Panel
If the lock is not used for a long time, the battery power will decrease. Use
Micro USB power source to recharge.