Scion-Tech SC05.7150 User manual

SC05.7150
User Manual
Version 1.0
User Manual
Scion Tech
SC05.7150
Tel: [phone] www.scion-tech.co.uk
[email protected]
HDMI Extender (HDBaseT), 150m
18Gbps, 4K/60Hz, 4:4:4, HDR

User Manual
Scion Tech
SC05.7150
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting,
operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges,
electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to
protect and extend the life of your equipment.
Table of Contents
1. Introduction…………………………………………………….…………………………….…….…………….……………………….
2. Features……………………………………………………………………………………………………….……….…………….……..
3. Package Contents…………………………………….……………………………………………………………….……….………..
4. Specifications…………………………………………………………………….………………………………………………….……
5. Panel Description (Transmitter)……………………………….…..….……………….…….………………………….……….
6. Panel Description (Receiver)……………...….…….….……………….…………………………….………….…….…………..
7. IR Pin Connections….……………….…….…….…..…………….………….….…………………………….……….…….….…….
8. Cable Lengths, CAT5e/6 and HDMI In/Out…………………………….…………….……….………………………………
9. Connecting the Transmitter…….….…………………………………………………….………………………….……………..
10. Connecting the Receiver…………….……………………………………….………………….……….…………………………
11. Application Drawing……………….…….……………….….……………………………………………….…….….…………….
13. Maintenance and Warranty…………………………………….…….….………………………….………….….……………..
3
3
3
4
5
6
7
7
7
7
8
9
Tel: [phone] www.scion-tech.co.uk
[email protected]
Page 2

1. Introduction
The SC05.7150 extends the distance between the HDMI source and display using a single CAT5e/6 cable
by up to 150m. Uncompressed Ultra HD 4K signals are transmitted without signal loss and automatically
adjusts for CAT5e/6 cable lengths. Bi-Directional Infra-Red provides control for both the source and
screen and the transmitter has a looped HDMI output for connecting a local screen.
The extenders use HDBaseT technology to achieve Ultra HD 4K@60Hz, RGB / YCbCr 4:4:4 to achieve zero
latency and loss less signal quality. The units are only 18mm thick which is ideal for mounting behind
screens or confined spaces.
PoC (power over cable) means only one device requires power.
The SC05.7150 is supplied as a pair and contains Tx/Rx infra-red cables and PSU . These units are ideal
for home, office and general retail display screens.
2. Features
●Extends HDMI over CAT5e/6/7 up to 150m
●Resolution: 4K/60Hz, RGB/YCbCr 4:4:4, YCbCr 4:2:2, YUV 4:2:0
●Standards: HDMI 2.0, HDCP 2.2, HDR10+
●Uncompressed zero frame latency
●Audio: LPCM, Dolby Digital™, DTS Surround Sound
●Full Duplex RS232 pass-through
●Bi-Directional IR
●PoC (power over cable) only one device requires power
●Ultra slim design, only 18mm thick
3. Package contents
Transmitter
1. 1 x Main unit (SC05.7150)
2. 1 x IR Blaster cable
3. 1 x IR Receiver cable
4. 1 x 3 pin Phoenix Terminal
5. 1 x Mounting ears
6. 1 x DC 24V/1A Power Adaptor
7. 1 x User Manual
Receiver
1. 1 x Main Unit (SC05.7150)
2. 1 x IR Blaster cable
3. 1 x IR Receiver cable
4. 1 x 3 pin Phoenix Terminal
5. 1 x Mounting ears
6. 1 x User Manual
User Manual
Scion Tech
SC05.7150
Tel: [phone] www.scion-tech.co.uk
[email protected]
Page 3

4. Specifications
User Manual
Scion Tech
SC05.7150
Tel: [phone] www.scion-tech.co.uk
[email protected]
Page 4
Technical
HDMI Compliance HDMI 2.0
HDCP Compliance HDCP 2.2
Bandwidth 18Gbps
Video Resolutions 4K/60Hz
HDMI Audio Formats
LPCM 2.0/2.1/5.1/6.17.1 channel, Dolby Digital™, Dolby True HD™,
Dolby Digital Plus (DD+)™, DTS HD Master Audio™, DTS HD-HRA, DTS-
X
Transmission Distance 150m@1080p / 120m@4K over CAT6
Colour Space RGB/YCbCr 4:4:4, YCbCr 4:2:2, YUV 4:2:0, HDR10+
Colour Depth /8/10/12-bit (1080p/60Hz, 4K/30Hz, 4K/60Hz, YCbCr 4:2:2/4:2:0),
8-bit (4K/60Hz 4:4:4)
Stereo Audio (Extracted) PCM 2.0
Connectors
Transmitter
2 x HDMI Input/Output Type A (19-Pin Female)
1 x RJ45 Data Socket
2 x 3.5mm Jack Sockets
1 x 3 Pin Phoenix Terminal
1 x DC Jack Socket
Receiver
1 x HDMI Input Type A (19-Pin Female)
1 x RJ45 Data Socket (1G and 10G LAN)
1 x 3 Pin Phoenix Terminal
3 x 3.5mm Jack Socket
1 x DC Jack Socket
Power
Transmitter - Power Adaptor
Input - 110~240V, 50/60Hz
Output - DC 24V/1A
Consumption - 4.5 Watts
Receiver - Power Adaptor
Input - 110~240V, 50/60Hz
Output - DC 24V/1A
Consumption - 4.5 Watts
Environmental
Operating Temperature -0 to 40°C
Storage Temperature -20 to 60°C
Relative Humidity 20 to 90% RH (no condensation)
ESD Protection Human body model +/- 8kV (air gap discharge) and +/-4kV (contact
discharge)
Mechanical
Housing Black Metal (Steel) Enclosure
Dimensions - Tx and Rx (W) 140 x (D) 65 x (H) 18mm (both ends)
Weight - Tx and Rx Tx = 160g and Rx = 160g

5. Transmitter Panel Description
User Manual
Scion Tech
SC05.7150
Tel: [phone] www.scion-tech.co.uk
[email protected]
Page 5
Front Panel
Service
HDMI Out HDMI In IR In IR Out TX RX
RS232
HDBT Out
DC 24V
Rear Panel
Name Function
Power LED Red LED illuminates when powered.
Service Port Used for firmware updates only.
DC 24V Power input. The extenders support PoC (power over
cable), only one end needs a power supply.
HDBT Output RJ45 port for connecting HDBT to receiver using
CAT5e/6.
LED (RJ45 Left)
On: Good connection between transmitter and receiver
Flashing: Poor connection between transmitter and
receiver.
Off: No connection between transmitter and receiver.
LED (RJ45 Right)
On: HDMI signal with HDCP.
Flashing: HDMI signal without HDCP.
Off: No HDMI signal.
HDMI Out HDMI looped output for local display.
HDMI In HDMI input from source device.
IR In IR sender cable. Sends signal to receiver.
IR Out IR emitter cable. Receives IR from receiver for
controlling the source device.
RS232 Full duplex RS232 data passed in both directions.

6. Receiver Panel Description
User Manual
Scion Tech
SC05.7150
Tel: [phone] www.scion-tech.co.uk
[email protected]
Page 6
Front Panel
Service
HDMI Out IR In IR Out TX RX
RS232
HDBT In
DC 24V
Rear Panel
Name Function
Power LED Red LED illuminates when powered.
Service Port Used for firmware updates only.
DC 24V Power input. The extenders support PoC (power over
cable), only one end needs a power supply.
HDBT In RJ45 port for connecting HDBT to transmitter using
CAT5e/6.
LED (RJ45 Left)
On: Good connection between transmitter and receiver
Flashing: Poor connection between transmitter and
receiver.
Off: No connection between transmitter and receiver.
LED (RJ45 Right)
On: HDMI signal with HDCP.
Flashing: HDMI signal without HDCP.
Off: No HDMI signal.
HDMI Out HDMI looped output for local display.
Audio Out Extracted analogue stereo audio output.
IR In IR sender cable. Sends signal to receiver.
IR Out IR emitter cable. Receives IR from receiver for
controlling the display device.
RS232 Full duplex RS232 data passed in both directions.
Audio Out

User Manual
Scion Tech
SC05.7150
Tel: [phone] www.scion-tech.co.uk
[email protected]
Page 7
7. IR Pin Connections
9. Connecting Transmitter
1. Connect the HDMI cable to the HDMI In port and the source device, a premium quality HDMI cable
should be used for 4K resolutions.
2. (Optional) Connect the HDMI cable to the HDMI Out port and the sink device, a premium HDMI
cable should be used for 4K resolutions.
3. (Optional) Connect the IR emitter to the IR Out port and position the emitter in front of the source
device IR window for remote end control.
4. (Optional) Connect the IR receiver cable to the IR In port and position the receptor in sight of the
IR remote.
5. (Optional) Connect the RS232 cables to the 3 pin Phoenix terminal and the control device.
6. Connect and power the transmitter using the 24V/1A power adaptor supplied, the extenders have
the option to power either end using the same power supply provided.
1
2
3
(Tip) IR Signal
(Ring) Volts +
(Body) N/C
IR Receiver Cable
Resolution / Distance
4K 394ft / 120m
1080p 492ft / 150m
Resolution / HDMI
Cable Length 4K/60Hz 4K/30Hz 1080p/60Hz
HDMI input & output 10ft / 3m 30ft / 10m 50ft 15m
Note: Premium high speed HDMI cables are recommended.
8. Cable lengths
IR Blaster Cable (Emitter)
1
2
3
(Tip) IR Signal
(Ring) Volts +
(Body) Ground
10. Connecting Receiver
1. Connect the HDMI cable to the HDMI Out port and the display device, a premium quality HDMI
cable should be used for 4K resolutions.
2. (Optional) Connect the audio cable to the Audio Out port and the display or amplifier.
3. (Optional) Connect the IR emitter to the IR Out port and position the emitter in front of the
displays IR window for remote end control.
4. (Optional) Connect the IR receiver cable to the IR In port and position the receptor in sight of the
IR remote. This will send IR data back to the source device.
5. (Optional) Connect the RS232 cables to the 3 pin Phoenix terminal and the control device.
6. Connect and power the transmitter using the 24V/1A power adaptor supplied, the extenders have
the option to power either end using the same power supply provided.

User Manual
Scion Tech
SC05.7150
Tel: [phone] www.scion-tech.co.uk
[email protected]
Page 8
DC 24V
HDBT Out
HDMI Out HDMI In IR In IR Out TX RX
RS232
DC 24V
HDBT In
HDMI Out Audio Out IR In IR Out TX RX
RS232
11. Application Drawing
HDMI Source
Satellite Receiver
HDMI Matrix
IR Emitter
IR Receiver
Local Display
4K/60Hz
Extended Display
4K/60Hz
Computer
RS232 Control
Audio System
CAT5e/6 (max 150m)
DC 12V/1A
Extended Display Remote
IR Emitter
IR Receiver
Satellite Remote

12. Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, pint thinner of benzene to clean these devices.
Servicing
Damage requiring service: This product should be serviced by a qualified service engineer if:
●The DC power cord or AC adaptor has been damaged.
●Objects or liquids have entered the housings.
●The product has been exposed to rain.
●The product has stopped working or shows signs of significant change in operating performance or
function.
●The unit has been dropped or severely damaged externally.
Servicing personnel: Do not attempt to service the product beyond that described in these instructions.
Refer all other servicing to authorised serving personnel.
Replacement parts: When parts need replacing ensure the service engineer uses parts specified by the
manufacture or parts that have the same characteristics as the original parts. Unauthorised substitutes
may result in fire, electric shock or other hazards.
Safety check: After a repair or service, ask the engineer to perform safety checks to confirm the product is
in proper working condition.
Warranty
If your product does not work properly because of a defect in materials or workmanship, our Company
(referred to as "the warrantor" ) will , for the length of the period indicated as below, (Parts and labour 2
years) which starts with the date of original purchase ("Limited Warranty period"), at its option either (a)
repair your product with new or refurbished parts, or (b) replace it with a new of a refurbished product.
The decision to repair or replace will be made by the warrantor.
During the "Labour" Limited Warranty period there will be no charge for labour. During the "Parts"
warranty period, there will be no charge for parts. You must mail-in your product during the warranty
period. This Limited Warranty is extended only to the original purchaser and only covers product
purchased as new. A purchase receipt or other proof of original purchase date is required for Limited
Warranty service.
Returning a Product
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the
original carton. Include a letter detailing the complaint and provide a day time phone number and/or email
address where you can be reached.
User Manual
Scion Tech
SC05.7150
Tel: [phone] www.scion-tech.co.uk
[email protected]
Page 9

Limited warranty limits and exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT
COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by warrantor,
or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration,
faulty installation, set-up adjustments, maladjustment of consumer controls, improper maintenance,
power line surge, lightning damage, modification, or service by anyone other than a Factory Service centre
or other authorized service engineer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed
unit if applicable, travel to and from the service, loss of or damage to media or images, data or other
recorded content. The items listed are not exclusive, but are for illustration only).
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY. This returns policy does not affect your legal rights. Details of your legal rights are
available from Trading Standards or Citizens Advice Consumer Service.
Scion Tech Limited
Thatcham, Berkshire, United Kingdom
User Manual
Scion Tech
SC05.7150
Tel: [phone] www.scion-tech.co.uk
[email protected]
Page 10